<div dir="ltr"><div><div><div>Hi John,<br><br></div>I tested Linux 3.18.7 on three different lantiq boards (ARV4518PW, ARV7518PW, ARV7159RW22). Here are the results:<br><br><b>ARV4518PW</b><br>Boot: Yes (Linux OpenWrt 3.18.7 #1 Sun Feb 22 09:51:57 CET 2015 mips GNU/Linux)<br>Ethernet: Yes<br>Switch: Yes<br>Wireless: Probably yes¹²<br>ADSL: Not tested, but interface is shown<br>USB: Yes<br>Sysupgrade: Yes<br><br><br><b>ARV7518PW</b><br>Boot: Yes (Linux OpenWrt 3.18.7 #1 Sun Feb 22 10:38:15 CET 2015 mips GNU/Linux)<br>Ethernet: Yes<br>Switch: Yes<br>Wireless: Yes<br>ADSL: <br>USB: Yes<br>Sysupgrade: Yes<br><br><br><b>ARV7519RW22</b><br>Boot: No (kernel panic, see ³ and attached dmesg)<br></div>Works with 14.07 image.<br></div><div><div><br><br>== 1 ==<br>[   16.116000] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)<br>[   16.120000] ath5k 0000:00:0e.0: registered as 'phy0'<br>[   16.344000] random: nonblocking pool is initialized<br>[   17.192000] ath5k: phy0: unable to init EEPROM<br>[   17.196000] ath5k: probe of 0000:00:0e.0 failed with error -5<br><br>== 2 ==<br>mtd6 partition (boardconfig) was blank (0xFF), probably because of an accidental erase in the past :(<br><br>== 3 ==<br>[    0.904000] 8021q: 802.1Q VLAN Support v1.8<br>[    0.908000] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19<br>[    0.916000] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6<br>[    0.924000] Please append a correct "root=" boot option; here are the available partitions:<br>[    0.932000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)<br>[    0.932000] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)<br>[   33.092000] random: nonblocking pool is initialized<br><br></div><div><br></div><div>By the way, there are no binary images in snapshots for any of the three devices.<br><br></div><div>Roger<br></div><div><br></div></div></div><div class="gmail_extra"><br><div class="gmail_quote">2015-02-09 13:30 GMT+01:00 John Crispin <span dir="ltr"><<a href="mailto:blogic@openwrt.org" target="_blank">blogic@openwrt.org</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi,<br>
<br>
i bumped the lantiq support to v3.18 and tested it on 6 different<br>
boards. I have not tested vdsl support due to lack of a vdsl line.<br>
could someone please do so.<br>
<br>
@antii: can you rebase/resnd the dwc2 series ? it does not apply to<br>
the v3.18 patches<br>
<br>
        John<br>
_______________________________________________<br>
openwrt-devel mailing list<br>
<a href="mailto:openwrt-devel@lists.openwrt.org">openwrt-devel@lists.openwrt.org</a><br>
<a href="https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel" target="_blank">https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel</a><br>
</blockquote></div><br></div>