That's great news.<div>Thanks again Dave - I found both SQM packages on the Chaos Calmer files.</div><div>I'll run some more test with users.</div><div><br></div><div>Regards,</div><div>Luis<br><br>On Thursday, February 12, 2015, Dave Taht <<a href="mailto:dave.taht@gmail.com">dave.taht@gmail.com</a>> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">sqm-scripts entered the openwrt package repos for chaos calmer quite<br>
some time back.<br>
<br>
On Thu, Feb 12, 2015 at 6:02 PM, Luis E. Garcia <<a href="javascript:;" onclick="_e(event, 'cvml', 'luis@bitamins.net')">luis@bitamins.net</a>> wrote:<br>
> Sebastian , Dave,<br>
> Thanks for these instructions.<br>
> I just finished a round of 3 months testing this setup on a couple of MyNet<br>
> N750 ( AR71xx based ) in several locations.<br>
> The feedback from users is very positive and encouraging - Most of them say<br>
> that they feel the networks behave a lot snappier than before [ 7.5Mbps Up/<br>
> 1Mbps Down].<br>
><br>
> All I had to do was install the 3 packages over BB 14.07 :<br>
> ip-full from the OpenWRT BB repository<br>
> and luci-app-sqm + sam-scripts from the CeroWRT repository.<br>
><br>
> Will the later two packages ever make it to the main OpenWRT package list?<br>
> or there other packages that on the main OpenWRT distribution that can be<br>
> used to provide this functionality? ( the 2 CeroWRT packages above make<br>
> really simple to setup ).<br>
><br>
> Regards,<br>
> Luis Garcia<br>
><br>
> On Thu, Oct 9, 2014 at 2:59 PM, Sebastian Moeller <<a href="javascript:;" onclick="_e(event, 'cvml', 'moeller0@gmx.de')">moeller0@gmx.de</a>> wrote:<br>
>><br>
>> Hi Luis,<br>
>><br>
>><br>
>> On Oct 9, 2014, at 20:05 , Luis E. Garcia <<a href="javascript:;" onclick="_e(event, 'cvml', 'luis@bitamins.net')">luis@bitamins.net</a>> wrote:<br>
>><br>
>> > Please excuse my dumb question or just point me to the right<br>
>> > documentation.<br>
>> > But is there an easy way to run AQM/Codel on BB 14.07 ?? I'm running BB<br>
>> > on a MyNETN750 that looks like it meets the HW requirements.<br>
>><br>
>> There probably is, I assume you need to install ip-full from the<br>
>> BB repository, and then copy<br>
>> <a href="http://snapon.lab.bufferbloat.net/~cero2/cerowrt/wndr/3.10.50-1/packages/luci-app-sqm_3-1_all.ipk" target="_blank">http://snapon.lab.bufferbloat.net/~cero2/cerowrt/wndr/3.10.50-1/packages/luci-app-sqm_3-1_all.ipk</a><br>
>> and<br>
>> <a href="http://snapon.lab.bufferbloat.net/~cero2/cerowrt/wndr/3.10.50-1/packages/sqm-scripts_6-1_all.ipk" target="_blank">http://snapon.lab.bufferbloat.net/~cero2/cerowrt/wndr/3.10.50-1/packages/sqm-scripts_6-1_all.ipk</a><br>
>> onto your router and try:<br>
>> opkg install sqm-scripts_6-1_all.ipk<br>
>> and:<br>
>> opkg install luci-app-sqm_3-1_all.ipk<br>
>><br>
>> You might need to play with opkg options, but in theory it should work…<br>
>> There probably also is a nicer way like adding a stanza similar to:<br>
>> src/gz toronto<br>
>> <a href="http://snapon.lab.bufferbloat.net/~cero2/cerowrt/wndr/3.10.50-1/packages" target="_blank">http://snapon.lab.bufferbloat.net/~cero2/cerowrt/wndr/3.10.50-1/packages</a><br>
>> to /etc/opkg.conf<br>
>> but I do not know the exact incantation of that, maybe hnyman, or Dave<br>
>> know the correct answer to this..<br>
>><br>
>> Best Regards<br>
>> Sebastian<br>
>><br>
>> ><br>
>> > Regards,<br>
>> > Luis Garcia<br>
>> ><br>
>> > On Thu, Oct 9, 2014 at 12:57 PM, Sebastian Moeller <<a href="javascript:;" onclick="_e(event, 'cvml', 'moeller0@gmx.de')">moeller0@gmx.de</a>><br>
>> > wrote:<br>
>> > Hi Richard,<br>
>> ><br>
>> > On Oct 9, 2014, at 18:42 , Richard Smith <<a href="javascript:;" onclick="_e(event, 'cvml', 'smithbone@gmail.com')">smithbone@gmail.com</a>> wrote:<br>
>> ><br>
>> > > On 10/06/2014 03:41 PM, Sebastian Moeller wrote:<br>
>> > ><br>
>> > >>><br>
>> > >>> I have spare routers that I can run OpenWRT or CeroWRt on and I'm<br>
>> > >>> setup to test with netperf, netperf-wrapper on my local network (<br>
>> > >>> desktop -> router -> laptop ) it's Gbit so I can easily saturate<br>
>> > >>> the router.<br>
>> > >><br>
>> > >> That sounds great. I think the first test should be to run SQM under<br>
>> > >> cerowrt, so you get a feel of how things should look. I typically run<br>
>> > >> netperf-wrapper rrul tests (for ipv4 and if available for ipv6)<br>
>> > >> through cerowrt with different settings for SQM. A second step then<br>
>> > >> is to instal SQM-scripts under openwrt and check whether the same<br>
>> > >> settings produce the same results ;)<br>
>> > ><br>
>> > > Ok. I'll get my spare WNDR3700v2 up running the latest cerowrt.<br>
>> > > Should be in the next few days. I'm a bit strapped for time right now.<br>
>> ><br>
>> > No hurry, I really appreciate your help and there is no time<br>
>> > pressure (rather the other way around, I do this for a hobby, and real life<br>
>> > leaves almost no time for that ;) )<br>
>> ><br>
>> > ><br>
>> > >> So just let me know what you are willing/ready to test and we will<br>
>> > >> take it from there okay? (I would already be a happy camper if you<br>
>> > >> could just install the current SQM-scripts on openwrt and just send<br>
>> > >> me the output of “logread” after installing and activating SQM, as<br>
>> > >> well as the output from “tc -d qdisc” before and after enabling SQM,<br>
>> > >> and finally the output of running “/etc/init.d/sqm stop ;<br>
>> > >> /etc/init.d/sqm start” on the router’s console; that hopefully works<br>
>> > >> or at least gives some indication what might be off. If you could<br>
>> > >> throw in a quick netperf-wrapper RRUL test through the router I will<br>
>> > >> be most delighted ;))<br>
>> > ><br>
>> > > Ok. That sounds like a good starter step. First question: Where are<br>
>> > > the current SQM scripts located and what's the process for installing them?<br>
>> > > Are they packages or stuff that I scp over and manually install?<br>
>> ><br>
>> > So the repository lives on:<br>
>> > <a href="https://github.com/dtaht/ceropackages-3.10" target="_blank">https://github.com/dtaht/ceropackages-3.10</a><br>
>> > I just followed Dave’s advice and used:<br>
>> > git clone git@github.com:dtaht/ceropackages-3.3.git<br>
>> > to get my own version to play around with. Oh, SQM basically is the work<br>
>> > of Dave (who wrote the scripts doing the actual AQM&QOS work) and Toke you<br>
>> > packaged all this nicely and created the GUI for it (all I ever did was<br>
>> > shuffling the GUI around a bit). I just started hacking around the files<br>
>> > from sqm-scripts and luck-app-sqm on my cerowrt (so I could immediately do<br>
>> > some testing), so I never got around building actual packages (I assume you<br>
>> > need to be setup to build whole openwrt/cerowrt images and that is outside<br>
>> > the scope of my recreational coding), But that said if you copy the files<br>
>> > from ceropackages-3.10/net/sqm-scripts/files to the matching directory on<br>
>> > your router you should have a working sqm-script. Or just use a cerowrt<br>
>> > built as SQM is standard and potentially hnyman’s build (<br>
>> > <a href="https://forum.openwrt.org/viewtopic.php?id=28392" target="_blank">https://forum.openwrt.org/viewtopic.php?id=28392</a> ) that also includes SQM.<br>
>> ><br>
>> > Best Regards<br>
>> > Sebastian<br>
>> ><br>
>> > ><br>
>> > > I'll let you know when I've taken a stab at getting that working.<br>
>> > ><br>
>> > > > Richard A. Smith <<a href="javascript:;" onclick="_e(event, 'cvml', 'richard@laptop.org')">richard@laptop.org</a>><br>
>> > > > Former One Laptop per Child<br>
>> > ><br>
>> > > Just FYI: I'm slowly switching my list subs over from my previous<br>
>> > > @<a href="http://laptop.org" target="_blank">laptop.org</a> address to my personal address. Just switched this one over<br>
>> > > thus the email address change.<br>
>> > ><br>
>> > > --<br>
>> > > Richard A. Smith<br>
>> > _______________________________________________<br>
>> > openwrt-devel mailing list<br>
>> > <a href="javascript:;" onclick="_e(event, 'cvml', 'openwrt-devel@lists.openwrt.org')">openwrt-devel@lists.openwrt.org</a><br>
>> > <a href="https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel" target="_blank">https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel</a><br>
>> ><br>
>> > _______________________________________________<br>
>> > openwrt-devel mailing list<br>
>> > <a href="javascript:;" onclick="_e(event, 'cvml', 'openwrt-devel@lists.openwrt.org')">openwrt-devel@lists.openwrt.org</a><br>
>> > <a href="https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel" target="_blank">https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel</a><br>
>><br>
><br>
<br>
<br>
<br>
--<br>
Dave Täht<br>
<br>
thttp://<a href="http://www.bufferbloat.net/projects/bloat/wiki/Upcoming_Talks" target="_blank">www.bufferbloat.net/projects/bloat/wiki/Upcoming_Talks</a><br>
</blockquote></div>