<HTML><BODY>Hello,<br><br>There is a problem with RTL8168evl/8111evl and driver to it r8169 on OpenWrt build for x86_64 device. The card is visible but link is not established. <br>I use Asus DSL-N10E as a gateway with dhcp server on it.<br><br>Log:<br><br>[ 10.731939] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded<br>[ 10.753192] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000026e000, 00:30:18:af:3e:a2, XID 0c900800 IRQ 41<br>[ 10.785080] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]<br><br>...<br><br>[ 19.937265] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready<br>[ 20.819531] r8169 0000:02:00.0 eth0: link down<br>[ 27.003365] r8169 0000:02:00.0 eth0: link up<br>[ 27.866438] r8169 0000:02:00.0 eth0: link down<br>[ 29.907983] r8169 0000:02:00.0 eth0: link up<br>[ 30.802642] r8169 0000:02:00.0 eth0: link down<br><br>What is the way to fix this issue? Did somebody find a resolution to it? <br><br>Best regards,<br><br>Kate<br><br><br>...</BODY></HTML>