<html><head><meta http-equiv="Content-Type" content="text/html charset=windows-1252"></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space;"><div>I’ve built a firmware from <a href="http://git.openwrt.org/openwrt.git">git.openwrt.org/openwrt.git</a> known as CHAOS CALMER (Bleeding Edge, r42657) for my MTK7620n board, it works well except this weird problem.</div><div><br></div><div>When I enable wifi, then trying to use iw dev wlan0 scan or trying to add secondary AP from luci interface, my board will reboot <span style="background-color: rgb(255, 255, 255); color: rgb(51, 51, 51); font-family: arial; font-size: 13px; line-height: 20.0200004577637px;">without any signs at all, when it rebooted, secondary AP was added, can be joined normally but I also found a call trace about </span>rt2800lib.c during the initialisation process, I wonder is this happened on your boards? I only have limited hardware driver debug skill and if I want to fix it by myself, where to go first?</div><div><br></div><div>Thanks a lot~</div><div><br></div><div>HERE is the boot log.</div><div><br></div><div>///////////// When I enabled wifi, it works well and msg looks like this:</div><div><br></div><div>BusyBox v1.22.1 (2014-09-25 02:03:10 CST) built-in shell (ash)</div><div>Enter 'help' for a list of built-in commands.</div><div><br></div><div> _______ ________ __</div><div> | |.-----.-----.-----.| | | |.----.| |_</div><div> | - || _ | -__| || | | || _|| _|</div><div> |_______|| __|_____|__|__||________||__| |____|</div><div> |__| W I R E L E S S F R E E D O M</div><div> -----------------------------------------------------</div><div> CHAOS CALMER (Bleeding Edge, r42657)</div><div> -----------------------------------------------------</div><div> * 1 1/2 oz Gin Shake with a glassful</div><div> * 1/4 oz Triple Sec of broken ice and pour</div><div> * 3/4 oz Lime Juice unstrained into a goblet.</div><div> * 1 1/2 oz Orange Juice</div><div> * 1 tsp. Grenadine Syrup</div><div> -----------------------------------------------------</div><div>root@OpenWrt:/# ifconfig</div><div>br-lan Link encap:Ethernet HWaddr 8C:21:A7:E1:06:04</div><div> inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0</div><div> inet6 addr: fdb9:97a6:50e::1/60 Scope:Global</div><div> inet6 addr: fe80::8e21:a7ff:fee1:604/64 Scope:Link</div><div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div><div> RX packets:0 errors:0 dropped:0 overruns:0 frame:0</div><div> TX packets:12 errors:0 dropped:0 overruns:0 carrier:0</div><div> collisions:0 txqueuelen:0</div><div> RX bytes:0 (0.0 B) TX bytes:1824 (1.7 KiB)</div><div><br></div><div>eth0 Link encap:Ethernet HWaddr 8C:21:A7:E1:06:04</div><div> inet6 addr: fe80::8e21:a7ff:fee1:604/64 Scope:Link</div><div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div><div> RX packets:7 errors:0 dropped:1 overruns:0 frame:0</div><div> TX packets:37 errors:0 dropped:0 overruns:0 carrier:0</div><div> collisions:0 txqueuelen:1000</div><div> RX bytes:2512 (2.4 KiB) TX bytes:6143 (5.9 KiB)</div><div> Interrupt:5</div><div><br></div><div>eth0.1 Link encap:Ethernet HWaddr 8C:21:A7:E1:06:04</div><div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div><div> RX packets:0 errors:0 dropped:0 overruns:0 frame:0</div><div> TX packets:13 errors:0 dropped:0 overruns:0 carrier:0</div><div> collisions:0 txqueuelen:0</div><div> RX bytes:0 (0.0 B) TX bytes:1870 (1.8 KiB)</div><div><br></div><div>eth0.2 Link encap:Ethernet HWaddr 8C:21:A7:E1:06:05</div><div> inet addr:192.168.2.107 Bcast:192.168.2.255 Mask:255.255.255.0</div><div> inet6 addr: fe80::8e21:a7ff:fee1:605/64 Scope:Link</div><div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div><div> RX packets:5 errors:0 dropped:0 overruns:0 frame:0</div><div> TX packets:16 errors:0 dropped:0 overruns:0 carrier:0</div><div> collisions:0 txqueuelen:0</div><div> RX bytes:1462 (1.4 KiB) TX bytes:2412 (2.3 KiB)</div><div><br></div><div>lo Link encap:Local Loopback</div><div> inet addr:127.0.0.1 Mask:255.0.0.0</div><div> inet6 addr: ::1/128 Scope:Host</div><div> UP LOOPBACK RUNNING MTU:65536 Metric:1</div><div> RX packets:50 errors:0 dropped:0 overruns:0 frame:0</div><div> TX packets:50 errors:0 dropped:0 overruns:0 carrier:0</div><div> collisions:0 txqueuelen:0</div><div> RX bytes:4032 (3.9 KiB) TX bytes:4032 (3.9 KiB)</div><div><br></div><div>wlan0 Link encap:Ethernet HWaddr 8C:21:A7:E1:06:04</div><div> inet6 addr: fe80::8e21:a7ff:fee1:604/64 Scope:Link</div><div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div><div> RX packets:0 errors:0 dropped:0 overruns:0 frame:0</div><div> TX packets:15 errors:0 dropped:0 overruns:0 carrier:0</div><div> collisions:0 txqueuelen:1000</div><div> RX bytes:0 (0.0 B) TX bytes:2296 (2.2 KiB)</div><div><br></div><div><br></div><div>///////////////////////////Here I tried to add secondary Wifi AP using luci, clicked “Save & Apply"</div><div><br></div><div>root@OpenWrt:/# [ 69.540000] device wlan0 left promiscuous mode</div><div>[ 69.540000] br-lan: port 2(wlan0) entered disabled state</div><div>[ 70.890000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready</div><div>[ 70.900000] device wlan0 entered promiscuous mode</div><div>[?</div><div><br></div><div>///////////////////////// Some thing went wrong here and the device rebooted</div><div><br></div><div>U-Boot 1.1.3 (Jan 7 2013 - 11:32:07)</div><div><br></div><div>Board: Ralink APSoC DRAM: 64 MB</div><div>relocate_code Pointer at: 83fb4000</div><div>enable ephy clock...done. rf reg 29 = 5</div><div>SSC disabled.</div><div>spi_wait_nsec: 29</div><div>spi device id: ef 40 17 0 0 (40170000)</div><div>find flash: W25Q64BV</div><div>raspi_read: from:30000 len:1000</div><div>*** Warning - bad CRC, using default environment</div><div><br></div><div>============================================</div><div>Ralink UBoot Version: 4.1.0.0</div><div>--------------------------------------------</div><div>ASIC 7620_MP (Port5<->None)</div><div>DRAM component: 512 Mbits DDR, width 16</div><div>DRAM bus: 16 bit</div><div>Total memory: 64 MBytes</div><div>Flash component: SPI Flash</div><div>Date:Jan 7 2013 Time:11:32:07</div><div>============================================</div><div>icache: sets:512, ways:4, linesz:32 ,total:65536</div><div>dcache: sets:256, ways:4, linesz:32 ,total:32768</div><div><br></div><div> ##### The CPU freq = 580 MHZ ####</div><div> estimate memory size =64 Mbytes</div><div><br></div><div>Please choose the operation:</div><div> 1: Load system code to SDRAM via TFTP.</div><div> 2: Load system code then write to Flash via TFTP.</div><div> 3: Boot system code via Flash (default).</div><div> 4: Entr boot command line interface.</div><div> 7: Load Boot Loader code then write to Flash via Serial.</div><div> 9: Load Boot Loader code then write to Flash via TFTP. 4</div><div>You choosed 3</div><div> 0</div><div><br></div><div>3: System Boot system code via Flash.</div><div>## Booting image at bc050000 ...</div><div>raspi_read: from:50000 len:40</div><div> Image Name: MIPS OpenWrt Linux-3.14.16</div><div> Image Type: MIPS Linux Kernel Image (lzma compressed)</div><div> Data Size: 1052542 Bytes = 1 MB</div><div> Load Address: 80000000</div><div> Entry Point: 80000000</div><div>raspi_read: from:50040 len:100f7e</div><div> Verifying Checksum ... OK</div><div> Uncompressing Kernel Image ... OK</div><div>No initrd</div><div>## Transferring control to Linux (at address 80000000) ...</div><div>## Giving linux memsize in MB, 64</div><div><br></div><div>Starting kernel ...</div><div><br></div><div>[ 0.000000] Linux version 3.14.16 (zhangzhao@zhangzhao-Aspire-E1-470G) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42657) ) #1 Thu Sep 25 02:10:04 CST 2014</div><div>[ 0.000000] Board has DDR1</div><div>[ 0.000000] Analog PMU set to hw control</div><div>[ 0.000000] Digital PMU set to hw control</div><div>[ 0.000000] SoC Type: Ralink MT7620N ver:2 eco:3</div><div>[ 0.000000] bootconsole [early0] enabled</div><div>[ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)</div><div>[ 0.000000] MIPS: machine is Franz MODEL1</div><div>[ 0.000000] Determined physical RAM map:</div><div>[ 0.000000] memory: 04000000 @ 00000000 (usable)</div><div>[ 0.000000] Initrd not found or empty - disabling initrd</div><div>[ 0.000000] Zone ranges:</div><div>[ 0.000000] Normal [mem 0x00000000-0x03ffffff]</div><div>[ 0.000000] Movable zone start for each node</div><div>[ 0.000000] Early memory node ranges</div><div>[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]</div><div>[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.</div><div>[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes</div><div>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256</div><div>[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2</div><div>[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)</div><div>[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)</div><div>[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)</div><div>[ 0.000000] Writing ErrCtl register=0006d010</div><div>[ 0.000000] Readback ErrCtl register=0006d010</div><div>[ 0.000000] Memory: 61708K/65536K available (2291K kernel code, 123K rwdata, 456K rodata, 128K init, 180K bss, 3828K reserved)</div><div>[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1</div><div>[ 0.000000] NR_IRQS:256</div><div>[ 0.000000] CPU Clock: 580MHz</div><div>[ 0.000000] systick: running - mult: 214748, shift: 32</div><div>[ 0.000000] genirq: Flags mismatch irq 7. 00014600 (timer) vs. 00014600 (systick)</div><div>[ 0.010000] Calibrating delay loop... 766.77 BogoMIPS (lpj=3833856)</div><div>[ 0.050000] pid_max: default: 32768 minimum: 301</div><div>[ 0.050000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)</div><div>[ 0.060000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)</div><div>[ 0.060000] pinctrl core: initialized pinctrl subsystem</div><div>[ 0.070000] NET: Registered protocol family 16</div><div>[ 0.080000] bio: create slab <bio-0> at 0</div><div>[ 0.080000] rt2880_gpio 10000600.gpio: registering 24 gpios</div><div>[ 0.090000] rt2880_gpio 10000600.gpio: registering 24 irq handlers</div><div>[ 0.090000] rt2880_gpio 10000660.gpio: registering 32 gpios</div><div>[ 0.100000] rt2880_gpio 10000660.gpio: registering 32 irq handlers</div><div>[ 0.100000] Switched to clocksource systick</div><div>[ 0.110000] NET: Registered protocol family 2</div><div>[ 0.120000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)</div><div>[ 0.120000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)</div><div>[ 0.140000] TCP: Hash tables configured (established 1024 bind 1024)</div><div>[ 0.150000] TCP: reno registered</div><div>[ 0.160000] UDP hash table entries: 256 (order: 0, 4096 bytes)</div><div>[ 0.170000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)</div><div>[ 0.190000] NET: Registered protocol family 1</div><div>[ 0.190000] rt-timer 10000100.timer: maximum frequency is 2441Hz</div><div>[ 0.210000] futex hash table entries: 256 (order: -1, 3072 bytes)</div><div>[ 0.230000] squashfs: version 4.0 (2009/01/31) Phillip Lougher</div><div>[ 0.250000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.</div><div>[ 0.270000] msgmni has been set to 120</div><div>[ 0.270000] io scheduler noop registered</div><div>[ 0.290000] io scheduler deadline registered (default)</div><div>[ 0.290000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled</div><div>[ 0.310000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a 16550A</div><div>[ 0.330000] console [ttyS0] enabled</div><div>[ 0.330000] console [ttyS0] enabled</div><div>[ 0.340000] bootconsole [early0] disabled</div><div>[ 0.340000] bootconsole [early0] disabled</div><div>[ 0.360000] m25p80 spi32766.0: found s25fl064k, expected mx25l6405d</div><div>[ 0.380000] m25p80 spi32766.0: s25fl064k (8192 Kbytes)</div><div>[ 0.380000] 4 ofpart partitions found on MTD device spi32766.0</div><div>[ 0.400000] Creating 4 MTD partitions on "spi32766.0":</div><div>[ 0.400000] 0x000000000000-0x000000030000 : "u-boot"</div><div>[ 0.420000] 0x000000030000-0x000000040000 : "u-boot-env"</div><div>[ 0.430000] 0x000000040000-0x000000050000 : "factory"</div><div>[ 0.440000] 0x000000050000-0x000000800000 : "firmware"</div><div>[ 0.460000] 0x000000150fbe-0x000000800000 : "rootfs"</div><div>[ 0.460000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only</div><div>[ 0.490000] mtd: device 4 (rootfs) set to be root filesystem</div><div>[ 0.500000] mtd: partition "rootfs_data" created automatically, ofs=0x390000, len=0x470000</div><div>[ 0.520000] 0x000000390000-0x000000800000 : "rootfs_data"</div><div>[ 0.530000] (unregistered net_device): port 0 link up (100Mbps/Full duplex)</div><div>[ 0.550000] ralink_soc_eth 10100000.ethernet: loaded mt7530 driver</div><div>[ 0.560000] eth0: done loading</div><div>[ 0.570000] rt3xxx-usbphy usbphy.3: loaded</div><div>[ 0.570000] rt2880_wdt 10000120.watchdog: Initialized</div><div>[ 0.590000] TCP: cubic registered</div><div>[ 0.590000] NET: Registered protocol family 17</div><div>[ 0.610000] 8021q: 802.1Q VLAN Support v1.8</div><div>[ 0.630000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.</div><div>[ 0.650000] Freeing unused kernel memory: 128K (802d0000 - 802f0000)</div><div>procd: Console is alive</div><div>procd: - watchdog -</div><div>[ 5.510000] usbcore: registered new interface driver usbfs</div><div>[ 5.510000] usbcore: registered new interface driver hub</div><div>[ 5.530000] usbcore: registered new device driver usb</div><div>[ 5.540000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver</div><div>[ 5.560000] ehci-platform: EHCI generic platform driver</div><div>[ 5.570000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver</div><div>[ 5.590000] ohci-platform: OHCI generic platform driver</div><div>procd: - preinit -</div><div>[ 6.010000] random: mktemp urandom read with 64 bits of entropy available</div><div>Press the [f] key and hit [enter] to enter failsafe mode</div><div>Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level</div><div>jffs2 is ready</div><div>jffs2 is ready</div><div>[ 9.470000] jffs2: notice: (280) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 7 of xref (0 dead, 0 orphan) found.</div><div>switching to overlay</div><div>procd: - early -</div><div>procd: - watchdog -</div><div>procd: - ubus -</div><div>procd: - init -</div><div>Please press Enter to activate this console.</div><div>[ 11.140000] NET: Registered protocol family 10</div><div>[ 11.160000] ip6_tables: (C) 2000-2006 Netfilter Core Team</div><div>[ 11.180000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea</div><div>[ 11.200000] Backport generated by backports.git backports-20140320-37-g5c33da0</div><div>[ 11.210000] ip_tables: (C) 2000-2006 Netfilter Core Team</div><div>[ 11.230000] nf_conntrack version 0.5.0 (966 buckets, 3864 max)</div><div>[ 11.270000] xt_time: kernel timezone is -0000</div><div>[ 11.310000] cfg80211: Calling CRDA to update world regulatory domain</div><div>[ 11.320000] cfg80211: World regulatory domain updated:</div><div>[ 11.330000] cfg80211: DFS Master region: unset</div><div>[ 11.330000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)</div><div>[ 11.330000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)</div><div>[ 11.330000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)</div><div>[ 11.330000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)</div><div>[ 11.330000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)</div><div>[ 11.330000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)</div><div>[ 11.330000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)</div><div>[ 11.330000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)</div><div>[ 11.330000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)</div><div>[ 11.650000] PPP generic driver version 2.4.2</div><div>[ 11.670000] NET: Registered protocol family 24</div><div>[ 11.710000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0500 detected</div><div>[ 11.730000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected</div><div>procd: - init complete -</div><div>[ 19.920000] device eth0.1 entered promiscuous mode</div><div>[ 19.920000] device eth0 entered promiscuous mode</div><div>[ 19.970000] br-lan: port 1(eth0.1) entered forwarding state</div><div>[ 19.980000] br-lan: port 1(eth0.1) entered forwarding state</div><div>[ 21.310000] random: nonblocking pool is initialized</div><div>[ 22.140000] br-lan: port 1(eth0.1) entered forwarding state</div><div>[ 22.180000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready</div><div>[ 22.200000] device wlan0 entered promiscuous mode</div><div>[ 31.910000] br-lan: port 2(wlan0) entered forwarding state</div><div>[ 31.930000] br-lan: port 2(wlan0) entered forwarding state</div><div>[ 31.930000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready</div><div>[ 31.960000] device wlan0-1 entered promiscuous mode</div><div>[ 31.980000] br-lan: port 3(wlan0-1) entered forwarding state</div><div>[ 31.980000] br-lan: port 3(wlan0-1) entered forwarding state</div><div>[ 32.000000] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready</div><div>[ 32.010000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready</div><div>[ 32.090000] ------------[ cut here ]------------</div><div>[ 32.100000] WARNING: CPU: 0 PID: 1050 at /home/zhangzhao/owrt/openwrt/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_mt7620n/compat-wireless-2014-05-22/drivers/net/wireless/rt2x00/rt2800lib.c:1092 rt2800_conf_tx+0x3c8/0x494 [rt2800lib]()</div><div>[ 32.150000] Modules linked in: rt2800soc rt2800mmio rt2800lib pppoe ppp_async iptable_nat rt2x00soc rt2x00mmio rt2x00lib pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_id xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_nat_irc nf_nat_ftp nf_nat nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_irc nf_conntrack_ftp nf_conntrack iptable_raw iptable_mangle iptable_filter ipt_REJECT ip_tables crc_itu_t crc_ccitt compat ledtrig_usbdev ip6t_REJECT ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables ipv6 eeprom_93cx6 arc4 crypto_blkcipher leds_gpio ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common</div><div>[ 32.280000] CPU: 0 PID: 1050 Comm: mac80211.sh Not tainted 3.14.16 #1</div><div>[ 32.300000] Stack : 00000000 00000000 00000000 00000000 8031ad2e 00000039 83294b88 831c0540</div><div> 8027b6d4 802be937 0000041a 8031399c 83294b88 831c0540 00000008 0000001c</div><div> 00000001 80225228 00000003 80190aac 00000444 831c0540 8027e850 828999bc</div><div> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000</div><div> 00000000 00000000 00000000 00000000 00000000 00000000 00000000 82899948</div><div> ...</div><div>[ 32.310000] Call Trace:</div><div>[ 32.310000] [<801ccb78>] show_stack+0x48/0x70</div><div>[ 32.310000] [<80236550>] warn_slowpath_common+0x84/0xb4</div><div>[ 32.310000] [<80236608>] warn_slowpath_null+0x18/0x24</div><div>[ 32.310000] [<83164030>] rt2800_conf_tx+0x3c8/0x494 [rt2800lib]</div><div>[ 32.310000]</div><div>[ 32.310000] ---[ end trace 0ecb626de4f0471a ]---</div><div>[ 33.940000] br-lan: port 2(wlan0) entered forwarding state</div><div>[ 33.980000] br-lan: port 3(wlan0-1) entered forwarding state</div><div><br></div><div><br></div></body></html>