<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hello,<br>
<br>
I have a TL-WR1043ND v1 running Barrier Breaker 14.07-rc2 and have a
Sector Antenna connected to the first antenna port. On the other two
I have removed the original Omni antennas.<br>
In order to tell the router that I want to work only with the Sector
antenna (first port) I have added the following option on
/etc/config/wireless radio configuration<br>
<b>option rxantenna '0x4'</b><b><br>
</b><b> option txantenna '0x4'</b><br>
<br>
Where 4 means 100 in binary which is equivalent to the first antenna
On only.<br>
However the router doesn't seem to obey it.<br>
If I run:<b> <br>
iw phy phy0 info | grep -i ant </b><br>
I get the following:<br>
Available Antennas: TX 0x7 RX 0x7<br>
Configured Antennas: TX 0x7 RX 0x7<br>
While I would expect to see the "Configured Antennas" with different
values.<br>
<br>
Does anyone have any idea if this is not working as expected or if
it's something to do with the ath9k driver or if I can try a
different driver, etc ?<br>
Previously I was running the snapshot version before RC2 and getting
the same result.<br>
If anyone has any clue would be greatly appreciated.<br>
<br>
Thanks<br>
Best regards,<br>
<br>
Fernando<br>
<br>
</body>
</html>