[PATCH 2/2] realtek: add support for HPE 1920-24G-PoE-370w

[Tim Small]

Hi,

I prepared a patch for this switch about 6 months ago, but never got 
around to submitting it.

The OEM firmware seems to do fan speed control in firmware - although 
the algorithm used is not obvious - it's probably temperature sensor or 
total power draw feedback, or some combination of the two.  Additionally 
when one fan fails the others go full-speed (and log faults).

The best policy is unfortunately probably to run the fans at full speed 
by default.

If you want to take a look it's here, and should be pretty much complete.

https://github.com/openwrt/openwrt/compare/main...tim-seoss:openwrt:hpe-1920-24g-poe-370w-jg926a

Cheers,

Tim.

On 18/09/2024 03:09, Evan Jobling via openwrt-devel wrote:
> The sender domain has a DMARC Reject/Quarantine policy which disallows
> sending mailing list messages using the original "From" header.
> 
> To mitigate this problem, the original message has been wrapped
> automatically by the mailing list software.
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

-- 
South East Open Source Solutions Limited
Registered in England and Wales with company number 06134732.
Registered Office: 2 Powell Gardens, Redhill, Surrey, RH1 1TQ
VAT number: 900 6633 53  http://seoss.co.uk/ +44-(0)1273-808309