[PATCH v2 8/9] Delete arm-magic script

Linus Walleij linus.walleij at linaro.org
Thu Sep 28 06:28:31 PDT 2023


This script was used to modify the wrong machine type passed
from the boot loader to the kernel. The device tree kernels
does not use the machine type so this script is no longer
needed.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 scripts/arm-magic.sh | 42 ------------------------------------------
 1 file changed, 42 deletions(-)

diff --git a/scripts/arm-magic.sh b/scripts/arm-magic.sh
deleted file mode 100755
index b4b0fa94f574..000000000000
--- a/scripts/arm-magic.sh
+++ /dev/null
@@ -1,42 +0,0 @@
-#!/bin/sh
-#
-#   Empty/wrong machtype-workaround generator
-#
-#   Copyright (C) 2006-2012 Imre Kaloz <kaloz at openwrt.org>
-#   based on linux/arch/arm/boot/compressed/head-xscale.S
-#
-#   This program is free software; you can redistribute it and/or modify
-#   it under the terms of the GNU General Public License as published by
-#   the Free Software Foundation; either version 2 of the License, or
-#   (at your option) any later version.
-#
-#   This program is distributed in the hope that it will be useful,
-#   but WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#   GNU General Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License
-#   along with this program; if not, write to the Free Software
-#   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-# NOTE: for now it's for only IXP4xx in big endian mode
-
-# list of supported boards, in "boardname machtypeid" format
-for board in "avila 526" "gateway7001 731" "nslu2 597" "nas100d 865" "wg302v1 889" "wg302v2 890" "pronghorn 928" "pronghornmetro 1040" "compex 1273" "wrt300nv2 1077" "loft 849" "dsmg600 964" "fsg3 1091" "ap1000 1543" "tw2662 1658" "tw5334 1664" "ixdpg425 604" "cambria 1468" "sidewinder 1041" "ap42x 4418"
-do
-  set -- $board
-  hexid=$(printf %x\\n $2)
-  if [ "$2" -lt "256" ]; then
-    # we have a low machtypeid, we just need a "mov" (e3a)
-    printf "\xe3\xa0\x10\x$hexid" > $BIN_DIR/$IMG_PREFIX-$1-zImage
-  else
-    # we have a high machtypeid, we need a "mov" (e3a) and an "orr" (e38)
-    if [ "$2" -lt "4096" ]; then
-      printf "\xe3\xa0\x10\x$(echo $hexid|cut -b "2 3")\xe3\x81\x1c\x$(echo $hexid|cut -b 1)" > $BIN_DIR/$IMG_PREFIX-$1-zImage
-    else
-      printf "\xe3\xa0\x10\x$(echo $hexid|cut -b "3 4")\xe3\x81\x1c\x$(echo $hexid|cut -b "1 2")" > $BIN_DIR/$IMG_PREFIX-$1-zImage
-    fi
-  fi
-    # generate the image
-    cat $BIN_DIR/$IMG_PREFIX-zImage >> $BIN_DIR/$IMG_PREFIX-$1-zImage
-done

-- 
2.34.1




More information about the openwrt-devel mailing list