Device Support Inquiry

[Nagumalla Venkata Uday Bhaskar]

++ Contact Team.


On 06/10/23 11:41, Nagumalla Venkata Uday Bhaskar wrote:
> Dear OpenWRT TIP Mailing List,
>
> My name is N. Venkata Uday Bhaskar, and I am writing to inquire about 
> the support for my device in OpenWRT. I hope you can provide guidance 
> on whether my device is supported or what steps are needed to add 
> support for it.
>
> Device Information :::
>
> Device Name and Model: Edge-core and ECS4125-10P
> Hardware Specifications:: SOC - RTL9310, CPU - 1000MHz, LX - 200MHz, 
> DDR - 800MHz
>
>
> Vty-1#show system
> System Description : ECS4125-10P-TIPC
> System OID String  : 1.3.6.1.4.1.259.10.1.57
> System Information
>  System Up Time         : 6 days, 20 hours, 28 minutes, and 53.98 seconds
>  System Name            :
>  System Location        :
>  System Contact         :
>  MAC Address (Unit 1)   : D0-77-CE-BD-65-68
>  Web Server             : Enabled
>  Web Server Port        : 80
>  Web Secure Server      : Enabled
>  Web Secure Server Port : 443
>  Telnet Server          : Enabled
>  Telnet Server Port     : 23
>  Jumbo Frame            : Disabled
>
> System Fan:
>  Force Fan Speed Full   : Disabled
> Unit 1
>  Fan 1: Ok
>  Fan 1 speed:  8385 rpm
>
> System Temperature:
> Unit 1
>  Temperature 1      :  28 degrees
>  Rising Threshold   :  62 degrees
>  Falling Threshold  :  27 degrees
>
> Unit 1
>
>  Main Power Status      : Up
> Vty-1#
>
> Vty-1#show version
> Unit 1
>  Serial Number          : EC2323002952
>  Hardware Version       : R01
>  Number of Ports        : 10
>  Main Power Status      : Up
>  Role                   : Master
>  Loader Version         : 0.0.2.3
>  Linux Kernel Version   : 4.4.153
>  Operation Code Version : 2.8.3.232
>
> Vty-1#
>
>
> I would also like to mention that I have access to documentation and 
> technical specifications for my device's hardware. I am willing to 
> provide any information or assistance that can help in the process of 
> adding support for my device in OpenWRT.
>
> To assist in evaluating the device, I have attached clear photos of 
> the hardware, including the PCB and labels on key components.
>
> I am eager to collaborate with the OpenWRT community to make this 
> device compatible with OpenWRT and contribute to the project. Please 
> let me know if there are specific steps I should follow or if you need 
> any additional information.
>
> Thank you for your time and consideration. I look forward to your 
> response and any guidance you can provide.
>
> Best regards,
> N. V. Uday