[PATCH] gemini: Set proper default networks

[Linus Walleij]

Some Gemini devices are NAS type devices and need to ask for
DHCP IP on eth0. Some has a LAN/WAN setup. Add sensible
defaults for all known devices.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 .../gemini/base-files/etc/board.d/02_network      | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/target/linux/gemini/base-files/etc/board.d/02_network b/target/linux/gemini/base-files/etc/board.d/02_network
index d6ee5cadfe25..93a02a7564ef 100644
--- a/target/linux/gemini/base-files/etc/board.d/02_network
+++ b/target/linux/gemini/base-files/etc/board.d/02_network
@@ -9,16 +9,31 @@ dlink,dir-685)
 	ucidef_set_interface "eth" device "eth0" protocol "none"
 	ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan"
 	;;
+dlink,dns-313|\
+edimax,ns-2502|\
+raidsonic,ib-4220-b|\
+wiliboard,wbd111|\
+wiliboard,wbd222)
+	# NAS machines with a single ethernet port
+	ucidef_set_interface_lan "eth0" "dhcp"
+	;;
 itian,sq201)
 	# These are all connected to eth1 thru VSC7395
 	ucidef_set_interface "eth" device "eth1" protocol "none"
 	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
 	;;
+ssi,1328)
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	;;
 storlink,gemini324)
 	# These are all connected to eth1 thru VSC7385
 	ucidef_set_interface "eth" device "eth1" protocol "none"
 	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
 	;;
+teltonika,rut1xx)
+	# One ethernet LAN which is offering DHCP
+	ucidef_set_interface_lan "eth0"
+	;;
 esac
 
 board_config_flush
-- 
2.34.1