[PATCH v4 1/6] at91: kernel: bump to 5.10

[Hauke Mehrtens]

On 9/20/21 11:27 AM, Claudiu Beznea wrote:
> Bump at91 targets to kernel v5.10. With this patches and files for
> wb45n and wb50n were removed as they are now included in upstream
> kernel. Along with:
> - this the kernel config for sam9x targets has been refreshed (with
>    make kernel_menuconfig + save);
> - CONFIG_ARCH_AT91 and specific sam9x SoCs (AT91RM9200, AT91SAM9,
>    SAM9X60) has been enabled such that sam9x SoCs to be able to boot.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
> ---
>   target/linux/at91/Makefile                    |   2 +-
>   .../at91/files/arch/arm/boot/dts/wb45n.dts    | 220 ------------------
>   .../at91/files/arch/arm/boot/dts/wb50n.dts    | 113 ---------
>   .../at91/files/arch/arm/boot/dts/wb50n.dtsi   | 205 ----------------
>   target/linux/at91/image/sam9x.mk              |   1 +
>   target/linux/at91/image/sama5.mk              |   1 +
>   .../101-ARM-at91-build-dtb-for-q5xr5.patch    |  10 +
>   .../101-ARM-at91-build-dtb-for-q5xr5.patch    |  10 -
>   .../102-ARM-at91-build-dtb-for-wb45n.patch    |  12 -
>   ...2-ARM-at91-wb45n-fix-duplicate-label.patch |  20 --
>   .../103-ARM-at91-build-dtb-for-wb50n.patch    |  12 -
>   ...3-ARM-at91-wb50n-fix-duplicate-label.patch |  39 ----
>   target/linux/at91/sam9x/config-default        | 105 ++++-----

The target/linux/at91/sama5/config-default probably also needs some 
updates. When I compile the sama5 subtaregt the kernel find the folowing 
new symbols:

Enable firmware caching during suspend (FW_CACHE) [Y/n/?] (NEW)
ATMEL Image Sensor Controller (ISC) support (VIDEO_ATMEL_ISC) [N/m/y/?] 
(NEW)
Microchip ASoC driver for boards using S/PDIF TX (SND_MCHP_SOC_SPDIFTX) 
[N/m/y/?] (NEW)
Microchip ASoC driver for boards using S/PDIF RX (SND_MCHP_SOC_SPDIFRX) 
[N/m/y/?] (NEW)
Special Function Registers support (AT91_SOC_SFR) [N/m/y/?] (NEW)

Hauke