[PATCH] ltq-vdsl-app: fix -Wundef warnings

[Mathias Kresin]

The following warnings are shown during build:

/usr/include/vdsl/cmv_message_format.h:33:6: warning: "MEI_SUPPORT_DEBUG_STREAMS" is not defined, evaluates to 0 [-Wundef]
 #if (MEI_SUPPORT_DEBUG_STREAMS == 1)
      ^~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/vdsl/drv_mei_cpe_interface.h:2256:6: warning: "MEI_SUPPORT_OPTIMIZED_FW_DL" is not defined, evaluates to 0 [-Wundef]
 #if (MEI_SUPPORT_OPTIMIZED_FW_DL == 1)
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~

The headers are provided by the MEI driver, but the defines are never
set by the vdsl app. While the struct with the
MEI_SUPPORT_OPTIMIZED_FW_DL conditional isn't used by the vdsl app,
however CMV_USED_PAYLOAD_8BIT_SIZE which value depends on
MEI_SUPPORT_DEBUG_STREAMS is.

Since the MEI driver doesn't provide an autogenerated header with
compile flags, the flags are hardcoded for the vdsl app.

Set them for the MEI driver as well, to indicate a relation to the
values used for the vdsl app and to be not surprised by a changed
default in case the MEI driver gets updated. Use the current default
values defined in the MEI driver.

Signed-off-by: Mathias Kresin <dev at kresin.me>
---
 package/kernel/lantiq/ltq-vdsl-mei/Makefile  | 11 ++++++++++-
 package/network/config/ltq-vdsl-app/Makefile | 16 ++++++++++++++--
 2 files changed, 24 insertions(+), 3 deletions(-)

diff --git a/package/kernel/lantiq/ltq-vdsl-mei/Makefile b/package/kernel/lantiq/ltq-vdsl-mei/Makefile
index 4a305d9c27..a15d0c931c 100644
--- a/package/kernel/lantiq/ltq-vdsl-mei/Makefile
+++ b/package/kernel/lantiq/ltq-vdsl-mei/Makefile
@@ -54,6 +54,15 @@ endef
 MAKE_FLAGS += \
 	SHELL="$(BASH)"
 
+# ltq-vdsl-app uses a header provided by the MEI driver which has some
+# conditionals.
+# Define the conditionals here to have the same view on both sides. If you
+# change them, you need to change them for the ltq-vdsl-app as well
+MEI_DRV_CFLAGS = \
+	-DMEI_DRV_ATM_PTM_INTERFACE_ENABLE=1 \
+	-DMEI_SUPPORT_DEBUG_STREAMS=1 \
+	-DMEI_SUPPORT_OPTIMIZED_FW_DL=1
+
 CONFIGURE_ARGS += \
 	--enable-kernelincl="$(LINUX_DIR)/include" \
 	--enable-device=vr9 \
@@ -63,7 +72,7 @@ CONFIGURE_ARGS += \
 	--enable-error_print \
 	--enable-ifxos-include="-I$(STAGING_DIR)/usr/include/ifxos/" \
 	--enable-ifxos-library="-L$(STAGING_DIR)/usr/lib" \
-	--enable-add_drv_cflags="-DMEI_DRV_ATM_PTM_INTERFACE_ENABLE=1" \
+	--enable-add_drv_cflags="$(MEI_DRV_CFLAGS)" \
 	--enable-linux-26 \
 	--enable-kernelbuild="$(LINUX_DIR)" \
 	--enable-drv_test_appl=yes \
diff --git a/package/network/config/ltq-vdsl-app/Makefile b/package/network/config/ltq-vdsl-app/Makefile
index 0968811984..7665f37514 100644
--- a/package/network/config/ltq-vdsl-app/Makefile
+++ b/package/network/config/ltq-vdsl-app/Makefile
@@ -36,6 +36,18 @@ define Package/ltq-vdsl-app/description
   Userland tool needed to control Lantiq VDSL CPE
 endef
 
+# ltq-vdsl-app uses a header provided by the MEI driver which has some
+# conditionals.
+#
+# Define them here with the default values they would get in the MEI driver,
+# have the same view on both sides.
+#
+# If you change them, you need to change them for the ltq-vdsl-app as well
+VDSL_APP_CFLAGS = \
+	-DMAX_CLI_PIPES=1 \
+	-DMEI_SUPPORT_DEBUG_STREAMS=1 \
+	-DMEI_SUPPORT_OPTIMIZED_FW_DL=1
+
 CONFIGURE_ARGS += \
 	--enable-vrx \
 	--enable-vrx-device=vr9 \
@@ -44,10 +56,10 @@ CONFIGURE_ARGS += \
 	--enable-ifxos \
 	--enable-ifxos-include="-I$(STAGING_DIR)/usr/include/ifxos" \
 	--enable-ifxos-library="-I$(STAGING_DIR)/usr/lib" \
-	--enable-add-appl-cflags="-DMAX_CLI_PIPES=1"  \
+	--enable-add-appl-cflags="$(VDSL_APP_CFLAGS)"  \
 	--enable-debug \
 	--disable-dti \
-	--with-channels-per-line="1" \
+	--with-channels-per-line="1"
 
 #CONFIGURE_ARGS += --enable-model=full
 #CONFIGURE_ARGS += --enable-model=lite
-- 
2.25.1