[PATCH] ath79: fix ath10k caldata extraction on some D-Link DIR-842 C3 devices
Adrian Schmutzler
mail at adrianschmutzler.de
Tue Oct 27 06:47:47 EDT 2020
Hi,
> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org]
> On Behalf Of Paul Fertser
> Sent: Dienstag, 27. Oktober 2020 07:26
> To: openwrt-devel at lists.openwrt.org
> Cc: Paul Fertser <fercerpav at gmail.com>
> Subject: [PATCH] ath79: fix ath10k caldata extraction on some D-Link DIR-842
> C3 devices
>
> According to forum threads [0][1] and a report on IRC by Doc-Saintly some of
> those boards have calibration data in a different place. Only one alternative
> location is known.
>
> Without proper board calibration data (board.bin having all 0xff bytes) ath10k
> firmware still tries to load but crashes on startup with a confusing error
> message.
>
> If you're applying this patch manually on your device do not forget to remove
> /lib/firmware/ath10k/pre-cal-pci-0000:00:00.0.bin and reboot to force caldata
> re-extraction.
>
> [0] https://forum.openwrt.org/t/support-for-d-link-dir842-rev-c3/41654
> [1] https://forum.openwrt.org/t/d-link-dir-842-cant-access-firmware-
> upload-form/65454
>
> Signed-off-by: Paul Fertser <fercerpav at gmail.com>
> ---
> .../generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-
> ath10k-caldata b/target/linux/ath79/generic/base-
> files/etc/hotplug.d/firmware/11-ath10k-caldata
> index 25e864ba72..79003929df 100644
> --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-
> ath10k-caldata
> +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-at
> +++ h10k-caldata
> @@ -170,6 +170,7 @@ case "$FIRMWARE" in
> dlink,dir-842-c3|\
> nec,wg1200cr)
Is this meant to cover nec,wg1200cr as well? Otherwise you should split the case.
Best
Adrian
> caldata_extract "art" 0x5000 0x2f20
> + caldata_valid "202f" || caldata_extract "reserved" 0x15000
> 0x2f20
> ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
> ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
> /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
> --
> 2.20.1
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: openpgp-digital-signature.asc
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.openwrt.org/pipermail/openwrt-devel/attachments/20201027/b0a63aca/attachment-0001.sig>
More information about the openwrt-devel
mailing list