[PATCH] for FS#3086 - Netgear D7800 eth0 WAN Port not working with 100Mbit]
peter at cardoe.co.uk
peter at cardoe.co.uk
Mon Oct 19 14:22:03 EDT 2020
---------------------------- Original Message ----------------------------
Subject: PATCH for FS#3086 - Netgear D7800 eth0 WAN Port not working with
100Mbit
From: "Peter Cardoe" <peter at cardoe.co.uk>
Date: Sun, October 18, 2020 9:51 pm
To: openwrt-devel-owner at lists.openwrt.org
--------------------------------------------------------------------------
Hello,
I have a patch for this problem but I have never submitted one before so
even though I've read about how to submit patches, I'm not sure how to
do it.
My patch is
diff --git
a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
index 1760b19..c970c31 100644
---
a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
+++
b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
@@ -303,13 +303,18 @@
gmac1: ethernet at 37200000 {
status = "ok";
phy-mode = "rgmii";
- phy-handle = <&phy4>;
+ //cardoe phy-handle = <&phy4>;
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
mtd-mac-address = <&art 6>;
+
+ fixed-link { //cardoe
+ speed = <1000>; //cardoe
+ full-duplex; //cardoe
+ }; //cardoe
};
gmac2: ethernet at 37400000 {
I have tested it on my Netgear D7800 and it fixes the problem - I get
connected to my ISP.
Any advice on what to do next would be very helpful.
Kind regards,
Peter Cardoe.
More information about the openwrt-devel
mailing list