[PATCH 18.06] ar71xx: mikrotik: bypass id check in __rb_get_wlan_data()

[Baptiste Jonglez]

From: Thibaut VARÈNE <hacks at slashdirt.org>

The id parameter in __rb_get_wlan_data() was incorrectly used on the
assumption that id "0" would always be tied to ath9k with RLE encoding
and positive id (in fact, only id "1" was valid) would always be tied to
("external") ath10k with LZO encoding.

Newer hardware revisions of supported devices prove this assumption to
be invalid, with ath9k caldata being now wrapped in MAGIC_ERD and LZO
compressed, so disable this check to allow newer hardware to correctly
decode caldata for ath9k.

Note: this patch assumes that ath9k caldata is never stored with the new
"LZOR" encoding scheme found on some ath10k devices.

Signed-off-by: Thibaut VARÈNE <hacks at slashdirt.org>
(cherry picked from commit 1c6990fe6d198718850b6a37998416cac69f6f53)
[keep publishing ath10k caldata in sysfs: it's the way it's done on 18.06]
Signed-off-by: Baptiste Jonglez <git at bitsofnetworks.org>
Tested-by: Baptiste Jonglez <git at bitsofnetworks.org> [Mikrotik RB941-2nD r3]
---
 target/linux/ar71xx/files/arch/mips/ath79/routerboot.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/routerboot.c b/target/linux/ar71xx/files/arch/mips/ath79/routerboot.c
index 76776e1d84..945894f823 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/routerboot.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/routerboot.c
@@ -206,10 +206,7 @@ __rb_get_wlan_data(u16 id)
 		u8 *erd_data;
 		u16 erd_len;
 
-		if (id == 0)
-			goto err_free;
-
-		err = routerboot_find_tag(tag, tag_len, id,
+		err = routerboot_find_tag(tag, tag_len, 0x1,
 					  &erd_data, &erd_len);
 		if (err) {
 			pr_err("no ERD data found for id %u\n", id);
@@ -224,9 +221,6 @@ __rb_get_wlan_data(u16 id)
 			goto err_free;
 		}
 	} else {
-		if (id != 0)
-			goto err_free;
-
 		err = rle_decode((char *) tag, tag_len, buf, RB_ART_SIZE,
 				 &src_done, &dst_done);
 		if (err) {
-- 
2.27.0