[OpenWrt-Devel] [PATCH 3/4] ar71xx: enable ethernet LED of Arduino Yun

[Sungbo Eo]

Commit 05d73a2a7379 enabled GPIO on ethernet LED, but proper LED setup was
not added then. This commit fixes it by reverting the change on the LED.

Fixes: 05d73a2a7379 ("ar71xx: Arduino Yun board 'WLAN RST' button support")

Signed-off-by: Sungbo Eo <mans0n at gorani.run>
---
 target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
index 5873248edf..8ab07d514b 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
@@ -117,8 +117,7 @@ static void __init ds_setup(void)
 	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
 								AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
 								AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-								AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-								AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+								AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN);
 
 	//Disable the Function for some pins to have GPIO functionality active
 	// GPIO6-7-8 and GPIO11
-- 
2.25.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel