[OpenWrt-Devel] [PATCH] base-files: diag: restore default trigger for 'boot' LED

[Piotr Dymacz]

For devices without a dedicated 'diag' LED, we use sometimes one of
other LEDs for indicating at least 'boot', 'failsafe' and 'upgrade'
stages. In some cases, at the same time these LEDs have defined default
triggers in DTS using 'linux,default-trigger' property. Current 'diag'
setup removes the trigger and turns off 'boot' LED after bootup.

One of the examples of such device is TP-Link TL-WR841N v14 (ramips)
which uses 'wlan' LED with defined 'linux,default-trigger' for 'diag':

aliases {
	led-boot = &led_wlan;
	led-failsafe = &led_wlan;
	led-upgrade = &led_wlan;
};

[...]

led_wlan: wlan {
	label = "tl-wr841n-v14:green:wlan";
	gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
	linux,default-trigger = "phy0tpt";
};

This patch extends 'diag.sh' and 'leds.sh' scripts to make sure default
trigger defined in DTS is restored for 'diag' LED which isn't used for
indicating 'running' stage.

Signed-off-by: Piotr Dymacz <pepe2k at gmail.com>
---
 package/base-files/Makefile                   |  2 +-
 package/base-files/files/etc/diag.sh          |  2 ++
 .../base-files/files/lib/functions/leds.sh    | 27 ++++++++++++++++---
 3 files changed, 26 insertions(+), 5 deletions(-)

diff --git a/package/base-files/Makefile b/package/base-files/Makefile
index e389148d47..18325564dc 100644
--- a/package/base-files/Makefile
+++ b/package/base-files/Makefile
@@ -12,7 +12,7 @@ include $(INCLUDE_DIR)/version.mk
 include $(INCLUDE_DIR)/feeds.mk
 
 PKG_NAME:=base-files
-PKG_RELEASE:=213
+PKG_RELEASE:=214
 PKG_FLAGS:=nonshared
 
 PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/
diff --git a/package/base-files/files/etc/diag.sh b/package/base-files/files/etc/diag.sh
index 8eb36c6feb..37a8ec758e 100644
--- a/package/base-files/files/etc/diag.sh
+++ b/package/base-files/files/etc/diag.sh
@@ -37,6 +37,8 @@ set_led_state() {
 		;;
 	done)
 		status_led_off
+		[ "$status_led" != "$running" ] && \
+			status_led_restore_trigger "boot"
 		[ -n "$running" ] && {
 			status_led="$running"
 			status_led_on
diff --git a/package/base-files/files/lib/functions/leds.sh b/package/base-files/files/lib/functions/leds.sh
index 8a1d21caef..43b2fe02ed 100644
--- a/package/base-files/files/lib/functions/leds.sh
+++ b/package/base-files/files/lib/functions/leds.sh
@@ -1,16 +1,24 @@
 #!/bin/sh
 # Copyright (C) 2013 OpenWrt.org
 
-get_dt_led() {
-	local label
+get_dt_led_path() {
 	local ledpath
 	local basepath="/proc/device-tree"
 	local nodepath="$basepath/aliases/led-$1"
 
 	[ -f "$nodepath" ] && ledpath=$(cat "$nodepath")
+	[ -n "$ledpath" ] && ledpath="$basepath$ledpath"
+
+	echo "$ledpath"
+}
+
+get_dt_led() {
+	local label
+	local ledpath=$(get_dt_led_path $1)
+
 	[ -n "$ledpath" ] && \
-		label=$(cat "$basepath$ledpath/label" 2>/dev/null) || \
-		label=$(cat "$basepath$ledpath/chan-name" 2>/dev/null)
+		label=$(cat "$ledpath/label" 2>/dev/null) || \
+		label=$(cat "$ledpath/chan-name" 2>/dev/null)
 
 	echo "$label"
 }
@@ -35,6 +43,17 @@ led_off() {
 	led_set_attr $1 "brightness" 0
 }
 
+status_led_restore_trigger() {
+	local trigger
+	local ledpath=$(get_dt_led_path $1)
+
+	[ -n "$ledpath" ] && \
+		trigger=$(cat "$ledpath/linux,default-trigger" 2>/dev/null)
+
+	[ -n "$trigger" ] && \
+		led_set_attr "$(get_dt_led $1)" "trigger" "$trigger"
+}
+
 status_led_set_timer() {
 	led_timer $status_led "$1" "$2"
 	[ -n "$status_led2" ] && led_timer $status_led2 "$1" "$2"
-- 
2.20.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel