[OpenWrt-Devel] [PATCH procd 2/2] state: fix reboot causing shutdown inside LXC container

Paul Oranje por at oranjevos.nl
Wed Jan 22 05:09:22 EST 2020


A few small remarks, see in-line, regards,
Paul

> Op 21 jan. 2020, om 09:35 heeft Petr Štetiar <ynezz at true.cz> het volgende geschreven:
> 
> Executing `reboot` command in OpenWrt system runing inside LXC container
> results in a shutdown of the container instead of rebooting the
> container.
> 
> This appears to have been caused by commit 832369078d81 ("state: fix
> shutdown when running in a container (FS#2425)"), which exits the pid
> einz instead of the reboot().
> 
> While at it, refactor the halting code into separate function to shorten
> the switch/case block and make it clearer, decrease the indentation
> level by reversing the container if condition, replace magic 0 with
> EXIT_SUCCESS constant in exit() and make it wait 1s for reboot message
> delivery in both container/host cases as well.
> 
> Ref: FS#2666
> Cc: Paul Spooren <mail at aparcar.org>
> Fixes: 832369078d81 ("state: fix shutdown when running in a container (FS#2425)")
> Tested-by: Baptiste Jonglez <lede at bitsofnetworks.org>
> Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ---
> state.c | 52 ++++++++++++++++++++++++++++++----------------------
> 1 file changed, 30 insertions(+), 22 deletions(-)
> 
> diff --git a/state.c b/state.c
> index 4737d0121ad0..e117ea302f93 100644
> --- a/state.c
> +++ b/state.c
> @@ -94,6 +94,34 @@ static void set_console(void)
> 		set_stdio(tty);
> }
> 
> +static void perform_halt()
> +{
> +	if (reboot_event == RB_POWER_OFF)
> +		LOG("- power down -\n");
> +	else
> +		LOG("- reboot -\n");
> +
> +	/* Allow time for last message to reach serial console, etc */
> +	sleep(1);
> +
> +	if (is_container()) {
> +		reboot(reboot_event);
When reboot returns, hasn't something gone wrong then ?
> +		exit(EXIT_SUCCESS);
The return below after exit() can never be reached.
> +		return;
> +	}
> +
> +	/* We have to fork here, since the kernel calls do_exit(EXIT_SUCCESS)
> +	 * in linux/kernel/sys.c, which can cause the machine to panic when
> +	 * the init process exits... */
> +	if (!vfork()) { /* child */
> +		reboot(reboot_event);
When reboot returns, hasn't something gone wrong then ?
> +		_exit(EXIT_SUCCESS);
> +	}
> +
> +	while (1)
> +		sleep(1);
> +}
> +
> static void state_enter(void)
> {
> 	char ubus_cmd[] = "/sbin/ubusd";
> @@ -153,29 +181,9 @@ static void state_enter(void)
> 		sync();
> 		sleep(1);
> #ifndef DISABLE_INIT
> -		if (reboot_event == RB_POWER_OFF)
> -			LOG("- power down -\n");
> -		else
> -			LOG("- reboot -\n");
> -
> -		if (!is_container()) {
> -			/* Allow time for last message to reach serial console, etc */
> -			sleep(1);
> -
> -			/* We have to fork here, since the kernel calls do_exit(EXIT_SUCCESS)
> -			 * in linux/kernel/sys.c, which can cause the machine to panic when
> -			 * the init process exits... */
> -			if (!vfork( )) { /* child */
> -				reboot(reboot_event);
> -				_exit(EXIT_SUCCESS);
> -			}
> -
> -			while (1)
> -				sleep(1);
> -		} else
> -			exit(0);
> +		perform_halt();
> #else
> -		exit(0);
> +		exit(EXIT_SUCCESS);
> #endif
> 		break;
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list