[OpenWrt-Devel] [PATCH v4] ath79: add support for TP-Link TL-MR6400

[Adrian Schmutzler]

Hi,

> -----Original Message-----
> From: Filip Moc [mailto:lede at moc6.cz]
> Sent: Freitag, 17. Januar 2020 13:53
> To: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> Cc: openwrt-devel at lists.openwrt.org; Enrico Mioso <mrkiko.rs at gmail.com>
> Subject: Re: [PATCH v4] ath79: add support for TP-Link TL-MR6400
> 
> Hi,
> 
> thanks for patch. Good to see support for MR6400 possibly going to ath79.
> 
> Just to clarify known issues.
> The first two issues are both just the same thing.

Yes, obviously ...

> Problem with interface showing always as up with carrier is with eth0, not eth1
> (eth0 is LAN1 to LAN3, eth1 is LAN4/WAN).

Yes.

I would adjust to the following during merge:

"- LTE module does not always come up during boot (showing USB enumeration errors). Similar behavior has been reported at least from one user for ar71xx, too. Turning USB off and on again will serve as a workaround.
- eth0 (LAN) always shows carrier as 1 even if no cable is plugged in (this works "correctly" on ar71xx)"

Best

Adrian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: openpgp-digital-signature.asc
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20200117/2e1a6e0a/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel