[OpenWrt-Devel] [PATCH RFC] ath79: add support for the ar7240 version of the ubiquiti bullet

[Adrian Schmutzler]

Hi,

> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org] On
> Behalf Of Russell Senior
> Sent: Mittwoch, 26. Februar 2020 11:20
> To: openwrt-devel at lists.openwrt.org
> Subject: [OpenWrt-Devel] [PATCH RFC] ath79: add support for the ar7240 version
> of the ubiquiti bullet
> 
> 
> The Ubiquiti Bullet M2HP come in two flavors, based on ar7240 and
> ar7241. Both are supported by ar71xx, despite the different SoCs. The
> ath79 target, however, currently supports only the ar7241. The ar7240
> version apparently has a differently wired ethernet interface and the
> ar7241-based image comes up on the ar7240-based versions without a
> working ethernet interface.
> 
> This is an attempt to support both flavors of ubnt-bullet-m,
> separately. Some of the choices I made may be considered dubious and/or
> harmful.

Interesting. Do you have any indications whether this will also affect the Loco
M and Picostation XM devices?

What's the base for the v0/v1 distinction? Is that visible to the user somehow?
I fear that meaningful naming will be the biggest problem here...

Best

Adrian 


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel