[OpenWrt-Devel] [PATCH] apm821xx: for Meraki MR24 modify BLOCKSIZE to reduce LEB over-allocation
chunkeey at gmail.com
Fri Sep 20 16:35:11 EDT 2019
On Tuesday, September 17, 2019 6:59:28 AM CEST Russell Senior wrote:
> On Meraki MR24, the BLOCKSIZE variable is used to allocate space for the
> kernel blob. The LEB size on MR24 is 15.5k (15872 bytes). In the
> particular instance observed, it was found that reducing blocksize to
> 512 bytes resulted in 3 fewer LEBs being allocated to the kernel ubi
> volume, with no ill effects.
> Signed-off-by: Russell Senior <russell at personaltelco.net>
> target/linux/apm821xx/image/Makefile | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
> diff --git a/target/linux/apm821xx/image/Makefile b/target/linux/apm821xx/image/Makefile
> index 8203de39c5..1aa4e0dad3 100644
> --- a/target/linux/apm821xx/image/Makefile
> +++ b/target/linux/apm821xx/image/Makefile
> @@ -127,7 +127,7 @@ define Device/meraki_mr24
> DEVICE_PACKAGES := kmod-spi-gpio -swconfig
> BOARD_NAME := mr24
> DEVICE_DTS := meraki-mr24
> - BLOCKSIZE := 63k
> + BLOCKSIZE := 512
> IMAGES := sysupgrade.bin
> DTB_SIZE := 64512
> IMAGE_SIZE := 8191k
The value looks odd, since UBI volumes are always a multiple of the LEB size
and the documentation we have
states that "The erasesize is the block size of the flash [...]".
so in that regard BLOCKSIZE could be 15872 or 16 KiB (if we would stick to
the real, raw value of the flash).
But I don't think a generated image with these parameters would boot anymore.
As the problem here is hidden in "MerakiAdd-dtb" step that is used generate the
KERNEL (for sysupgrade) relies on that BLOCKSIZE value being a integer divisible
of the 63KiB value. Since this magic value (63KiB) is needed to place the
DTB+kernel at the correct offsets for mkmerakifw.
so, what to do? Because it's possible to get rid of the whole logic as well as the
MR24 portion of the mkmerakifw by refactoring the u-boot boot commands to just load
and boot a multi-file image. The framework is all there since the initramfs image is
already utilizing "MuImage-initramfs". This would save even more since this makes it
possible to also shrink down the DTB as well. As the "raw" information in there is
just around 10k-15k and the rest of this is fluff. (Some of this fluff is needed by
u-boot though. As it needs some space (probably less than 128 bytes) of this area to
"add" in values for frequencies and ranges. So it can't be completely removed like
with newer u-boots).
So, Would you be willing to do this?
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel