[OpenWrt-Devel] [PATCH v3] ramips: add support for Xiaomi Mi Wi-Fi Router 3G v2

[Roger Pueyo Centelles | Guifi.net]

Hi Paul,

I opened a pull request on GitHub to support the Mi Router 4A Gigabit
Edition, which is essentially the same device. You can find it at
https://github.com/openwrt/openwrt/pull/2486

There are a few differences you may want to address:

>>> +	xiaomi,mir3g-v2)
>>> +		wan_mac=$(mtd_get_mac_binary factory 0xe006)
>>> +		;;

You may want to add "label_mac=$wan_mac" there, if the MAC address on
the back label matches the WAN interface (on the R4G it does).

Also, it looks like a newline should be added at the end of the .dts file.

>>> +define Device/xiaomi_mir3g-v2
>>> + MTK_SOC := mt7621
>>> + IMAGE_SIZE := 14848k
>>> + DEVICE_VENDOR := Xiaomi
>>> + DEVICE_MODEL := Mi Router 3G
>>> + DEVICE_VARIANT := v2
>>> + DEVICE_ALT0_VENDOR := Xiaomi
>>> + DEVICE_ALT0_MODEL := Mi Router 4A Gigabit Edition
>>> + DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 wpad-basic
>>> +endef
>>> +TARGET_DEVICES += xiaomi_mir3g-v2

Since there are two Xiaomi Router 4A variants, the 100m and the Gigabit
Edition, you may want to use:

+ DEVICE_ALT0_VENDOR := Xiaomi
+ DEVICE_ALT0_MODEL := Mi Router 4A + DEVICE_ALT0_VARIANT := Gigabit Edition


Last, I added the device to uboot-envtools. Feel free to copy it:
https://github.com/openwrt/openwrt/pull/2486/commits/2625499ca554449e7a19bb5f6f61acdefb5a69e1

Best,

Roger

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20191011/f0ef6ab8/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel