[OpenWrt-Devel] OpenWrt 19.07 status

Stijn Segers foss at volatilesystems.org
Tue Nov 26 15:30:45 EST 2019



Op maandag 25 november 2019 om 23:34 schreef Hauke Mehrtens 
<hauke at hauke-m.de>:
> Hi,
> 
> There are now quite some changes in the OpenWrt 19.07 branch compared 
> to
> the 19.07-rc1.
> 
> The builds are looking ok:
> http://buildbot.openwrt.org/openwrt-19.07/images/grid
> 
> I looked through the responses to 19.07-rc1 in the forum and the bug
> tracker and it looks mostly good.
> https://forum.openwrt.org/t/openwrt-19-07-0-first-release-candidate/48040
> https://bugs.openwrt.org/index.php?reported%5B%5D=10
> 
> 
> I saw the following reports:
> 
> MT7621/MT7620: NETDEV WATCHDOG: eth0 (mtk_soc_eth):
> https://bugs.openwrt.org/index.php?do=details&task_id=2628
> https://bugs.openwrt.org/index.php?do=details&task_id=2617
> https://bugs.openwrt.org/index.php?do=details&task_id=2605
> 
> 
> It looks like there is a throughput problem with ath10k-ct on QCA9984,
> https://bugs.openwrt.org/index.php?do=details&task_id=2593
> there are multiple reports in the Forum.
> 
> For me QCA9880 on a BTHH5A with ath10k-ct on 5GHz works in openwrt 
> 19.07
> The AP can do 180 MBit/s TX and only 40 Mbit/s RX over about 8m with a
> wall in between with sae-mixed to a Intel iwl8265.
> It is also very close to 40MBit/s not much changing the lowest I saw 
> in
> about 30 outputs from iperf3 was 38.8 MBit/s and them highest 41.2 
> MBit/s
> 
> Are there any more known regressions and serious bugs?
> 
> 
> Images for the following devices are probably too big:
> * WR902AC
> * EnGenius ESR-9752  ( EnGenius ESR-9753 )
> Jow has some pending patches to deactivate support for some of them:
> https://patchwork.ozlabs.org/project/openwrt/list/?series=143332
> This looks good to me.

Hi Hauke, Jow,

The TP-Link TL-MR3420 v2 images seem too big as well:

https://forum.openwrt.org/t/openwrt-19-07-0-first-release-candidate/48040/144

> 
> We should mention how to install wpad-openssl or wpad-wolfssl to get
> WPA3 support in the release notes.

Excellent point, a lot of people seem to expect WPA3 works OOTB.

Cheers

Stijn

> 
> Hauke
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list