[OpenWrt-Devel] [OpenWrt-Devel, 3/7] at91: Generate sdcard images for at91sam9x5ek boards.

Sandeep.Sheriker at microchip.com Sandeep.Sheriker at microchip.com
Thu May 30 08:33:57 PDT 2019



> -----Original Message-----
> From: Hauke Mehrtens <hauke at hauke-m.de>
> Sent: Thursday, May 30, 2019 4:50 AM
> To: Sandeep Sheriker Mallikarjun - C17018
> <Sandeep.Sheriker at microchip.com>; openwrt-devel at lists.openwrt.org
> Cc: Sandeep Sheriker Mallikarjun - C17018
> <Sandeep.Sheriker at microchip.com>
> Subject: Re: [OpenWrt-Devel] [OpenWrt-Devel, 3/7] at91: Generate sdcard
> images for at91sam9x5ek boards.
> 
> External E-Mail
> 
> 
> On 5/28/19 7:21 PM, Sandeep Sheriker M wrote:
> > From: Sandeep Sheriker Mallikarjun
> > <sandeepsheriker.mallikarjun at microchip.com>
> >
> > Signed-off-by: Sandeep Sheriker Mallikarjun
> > <sandeepsheriker.mallikarjun at microchip.com>
> > Signed-off-by: Sandeep Sheriker M <sandeep.sheriker at microchip.com>
> > ---
> >  target/linux/at91/image/Makefile | 8 +++++++-
> > target/linux/at91/image/sam9x.mk | 5 +++++
> >  2 files changed, 12 insertions(+), 1 deletion(-)
> >
> > diff --git a/target/linux/at91/image/Makefile
> > b/target/linux/at91/image/Makefile
> > index e4c17e3..5b1433c 100644
> > --- a/target/linux/at91/image/Makefile
> > +++ b/target/linux/at91/image/Makefile
> > @@ -51,13 +51,19 @@ define Build/at91-sdcard
> >       mcopy -i $@.boot $(DTS_DIR)/$(dts).dtb \
> >          ::$(dts).dtb)
> >
> > +  $(if $(findstring sama5,$(DEVICE_NAME)) , \
> >    mcopy -i $@.boot \
> >      $(BIN_DIR)/u-boot-$(DEVICE_NAME:at91-%=%)_mmc/u-boot.bin \
> >      ::u-boot.bin
> >
> >    mcopy -i $@.boot \
> >      $(BIN_DIR)/at91bootstrap-$(DEVICE_NAME:at91-
> %=%)sd*/at91bootstrap.bin \
> > -    ::BOOT.bin
> > +    ::BOOT.bin ,
> > +
> > +  mcopy -i $@.boot $(BIN_DIR)/u-boot-*_mmc/u-boot.bin ::u-boot.bin
> > +
> > +  mcopy -i $@.boot \
> > +    $(BIN_DIR)/at91bootstrap-*sd*/at91bootstrap.bin ::BOOT.bin)
> >
> 
> Wouldn't it be more maintainable to split the at91-sdcard build part into
> multiple parts?
> 
> Is it save to use at91bootstrap-*sd*/ ? are you sure it will take the correct
> file?
> 

Ignore this patch, will resend it by splitting them in to multiple parts.

> 
> >    ./gen_at91_sdcard_img.sh \
> >        $@.img \


More information about the openwrt-devel mailing list