[OpenWrt-Devel] [PATCH 4/4] at91: Update kernel to version 4.14

Sandeep Sheriker M sandeep.sheriker at microchip.com
Tue May 28 10:21:16 PDT 2019


From: Hauke Mehrtens <hauke at hauke-m.de>

This adds support for kernel 4.14 to the target and directly make it the
default kernel version to use.

Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 target/linux/at91/Makefile                         |   2 +-
 target/linux/at91/config-4.14                      | 568 +++++++++++++
 target/linux/at91/config-4.9                       | 543 -------------
 target/linux/at91/legacy/config-default            |   1 +
 .../100-ARM-at91-build-dtb-for-LMU5000.patch       |  10 +
 .../101-ARM-at91-build-dtb-for-q5xr5.patch         |  10 +
 .../102-ARM-at91-build-dtb-for-wb45n.patch         |  12 +
 .../103-ARM-at91-build-dtb-for-wb50n.patch         |  12 +
 ...105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch | 434 ++++++++++
 .../100-ARM-at91-build-dtb-for-LMU5000.patch       |  10 -
 .../101-ARM-at91-build-dtb-for-q5xr5.patch         |  10 -
 .../102-ARM-at91-build-dtb-for-wb45n.patch         |  12 -
 .../103-ARM-at91-build-dtb-for-wb50n.patch         |  12 -
 ...4-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch | 893 ---------------------
 ...105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch | 435 ----------
 target/linux/generic/config-4.14                   |   2 +
 target/linux/generic/config-4.19                   |   2 +
 17 files changed, 1052 insertions(+), 1916 deletions(-)
 create mode 100644 target/linux/at91/config-4.14
 delete mode 100644 target/linux/at91/config-4.9
 create mode 100644 target/linux/at91/patches-4.14/100-ARM-at91-build-dtb-for-LMU5000.patch
 create mode 100644 target/linux/at91/patches-4.14/101-ARM-at91-build-dtb-for-q5xr5.patch
 create mode 100644 target/linux/at91/patches-4.14/102-ARM-at91-build-dtb-for-wb45n.patch
 create mode 100644 target/linux/at91/patches-4.14/103-ARM-at91-build-dtb-for-wb50n.patch
 create mode 100644 target/linux/at91/patches-4.14/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch
 delete mode 100644 target/linux/at91/patches-4.9/100-ARM-at91-build-dtb-for-LMU5000.patch
 delete mode 100644 target/linux/at91/patches-4.9/101-ARM-at91-build-dtb-for-q5xr5.patch
 delete mode 100644 target/linux/at91/patches-4.9/102-ARM-at91-build-dtb-for-wb45n.patch
 delete mode 100644 target/linux/at91/patches-4.9/103-ARM-at91-build-dtb-for-wb50n.patch
 delete mode 100644 target/linux/at91/patches-4.9/104-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch
 delete mode 100644 target/linux/at91/patches-4.9/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch

diff --git a/target/linux/at91/Makefile b/target/linux/at91/Makefile
index cae3c62..4dc70eb 100644
--- a/target/linux/at91/Makefile
+++ b/target/linux/at91/Makefile
@@ -13,7 +13,7 @@ BOARDNAME:=Microchip (Atmel AT91)
 FEATURES:=ext4 squashfs targz usb usbgadget ubifs
 SUBTARGETS:=sama5 legacy
 
-KERNEL_PATCHVER:=4.9
+KERNEL_PATCHVER:=4.14
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/at91/config-4.14 b/target/linux/at91/config-4.14
new file mode 100644
index 0000000..ca526b9
--- /dev/null
+++ b/target/linux/at91/config-4.14
@@ -0,0 +1,568 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_SET_MEMORY=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM=y
+CONFIG_ARM_AT91_CPUIDLE=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_HEAVY_MB=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_LPAE is not set
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_AT91_ADC=y
+CONFIG_AT91_SAMA5D2_ADC=y
+CONFIG_AT91_SOC_ID=y
+CONFIG_ATMEL_AIC5_IRQ=y
+CONFIG_ATMEL_EBI=y
+CONFIG_ATMEL_PIT=y
+CONFIG_ATMEL_PM=y
+CONFIG_ATMEL_SDRAMC=y
+CONFIG_ATMEL_SSC=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_TCLIB=y
+CONFIG_AT_HDMAC=y
+CONFIG_AT_XDMAC=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_BATTERY_ACT8945A=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMA=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=7
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_SIZE_MBYTES=16
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_AT91=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_COREDUMP=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_SPECTRE=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRASH_CORE=y
+CONFIG_CRASH_DUMP=y
+CONFIG_CRC16=y
+# CONFIG_CRC32_SARWATE is not set
+CONFIG_CRC32_SLICEBY8=y
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_CRYPTO_ACOMP2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_GHASH=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_UART_8250 is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_CMA=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DNOTIFY=y
+CONFIG_DRM=y
+CONFIG_DRM_ATMEL_HLCDC=y
+CONFIG_DRM_BRIDGE=y
+CONFIG_DRM_FBDEV_EMULATION=y
+CONFIG_DRM_FBDEV_OVERALLOC=100
+CONFIG_DRM_GEM_CMA_HELPER=y
+CONFIG_DRM_KMS_CMA_HELPER=y
+CONFIG_DRM_KMS_FB_HELPER=y
+CONFIG_DRM_KMS_HELPER=y
+CONFIG_DRM_PANEL=y
+CONFIG_DRM_PANEL_BRIDGE=y
+CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DTC=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EEPROM_AT24=y
+CONFIG_ELF_CORE=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_EXT4_FS=y
+CONFIG_FAT_FS=y
+CONFIG_FB=y
+# CONFIG_FB_ATMEL is not set
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_CMDLINE=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FORCE_MAX_ZONEORDER=15
+CONFIG_FREEZER=y
+CONFIG_FS_MBCACHE=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_GRO_CELLS is not set
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARM_SMCCC=y
+CONFIG_HAVE_AT91_AUDIO_PLL=y
+CONFIG_HAVE_AT91_GENERATED_CLK=y
+CONFIG_HAVE_AT91_H32MX=y
+CONFIG_HAVE_AT91_SMD=y
+CONFIG_HAVE_AT91_USB_CLK=y
+CONFIG_HAVE_AT91_UTMI=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_HAVE_EBPF_JIT=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FB_ATMEL=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HDMI=y
+CONFIG_HID=y
+CONFIG_HID_GENERIC=y
+CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_ATMEL=y
+CONFIG_HZ_FIXED=0
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_AT91=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_IIO=y
+CONFIG_IIO_BUFFER=y
+CONFIG_IIO_KFIFO_BUF=y
+CONFIG_IIO_TRIGGER=y
+CONFIG_IIO_TRIGGERED_BUFFER=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_INPUT_LEDS=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+# CONFIG_JFFS2_FS is not set
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_XZ is not set
+CONFIG_KEXEC=y
+CONFIG_KEXEC_CORE=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_QT1070=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_TRIGGER_CPU=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_LIBFDT=y
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MACB=y
+CONFIG_MACB_USE_HWSTAMP=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MANDATORY_FILE_LOCKING=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_MEMORY=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MFD_ACT8945A=y
+CONFIG_MFD_ATMEL_FLEXCOM=y
+CONFIG_MFD_ATMEL_HLCDC=y
+CONFIG_MFD_ATMEL_SMC=y
+CONFIG_MFD_CORE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MICREL_PHY=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_OF_AT91=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_PHYSMAP_OF is not set
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+# CONFIG_MTD_UBI_BLOCK is not set
+CONFIG_MTD_UBI_FASTMAP=y
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NEON=y
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NVMEM=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PARTITION_ADVANCED is not set
+# CONFIG_PCI_DOMAINS_GENERIC is not set
+# CONFIG_PCI_SYSCALL is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_PINCTRL_AT91PIO4=y
+# CONFIG_PINCTRL_SINGLE is not set
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+# CONFIG_PL310_ERRATA_753970 is not set
+# CONFIG_PL310_ERRATA_769419 is not set
+CONFIG_PM=y
+CONFIG_PM_ADVANCED_DEBUG=y
+CONFIG_PM_CLK=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_DEBUG=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_AT91_POWEROFF=y
+CONFIG_POWER_RESET_AT91_RESET=y
+CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_PROC_VMCORE=y
+CONFIG_PWM=y
+CONFIG_PWM_ATMEL=y
+CONFIG_PWM_ATMEL_HLCDC_PWM=y
+CONFIG_PWM_ATMEL_TCB=y
+CONFIG_PWM_SYSFS=y
+CONFIG_RATIONAL=y
+# CONFIG_RCU_NEED_SEGCBLIST is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGMAP_SPI=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_ACT8865=y
+CONFIG_REGULATOR_ACT8945A=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_RTC_DRV_CMOS is not set
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SAMA5D4_WATCHDOG=y
+# CONFIG_SCHED_INFO is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SG_POOL=y
+CONFIG_SND=y
+CONFIG_SND_ARM=y
+# CONFIG_SND_AT73C213 is not set
+# CONFIG_SND_AT91_SOC_SAM9G20_WM8731 is not set
+# CONFIG_SND_AT91_SOC_SAM9X5_WM8731 is not set
+CONFIG_SND_ATMEL_SOC=y
+CONFIG_SND_ATMEL_SOC_CLASSD=y
+CONFIG_SND_ATMEL_SOC_DMA=y
+# CONFIG_SND_ATMEL_SOC_PDMIC is not set
+CONFIG_SND_ATMEL_SOC_SSC=y
+CONFIG_SND_ATMEL_SOC_SSC_DMA=y
+# CONFIG_SND_ATMEL_SOC_TSE850_PCM5142 is not set
+CONFIG_SND_ATMEL_SOC_WM8904=y
+# CONFIG_SND_COMPRESS_OFFLOAD is not set
+CONFIG_SND_DMAENGINE_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_JACK_INPUT_DEV=y
+CONFIG_SND_PCM=y
+CONFIG_SND_PCM_TIMER=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_WM8904=y
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_TIMER=y
+CONFIG_SOC_BUS=y
+CONFIG_SOC_SAMA5=y
+CONFIG_SOC_SAMA5D2=y
+CONFIG_SOC_SAMA5D3=y
+CONFIG_SOC_SAMA5D4=y
+CONFIG_SOC_SAM_V7=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_ATMEL_QUADSPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+# CONFIG_SQUASHFS is not set
+CONFIG_SRAM=y
+CONFIG_SRAM_EXEC=y
+CONFIG_SRCU=y
+# CONFIG_STANDALONE is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_SWIOTLB=y
+CONFIG_SWPHY=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SYNC_FILE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TINY_SRCU=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_PROPERTIES=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB=y
+CONFIG_USB_ACM=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+# CONFIG_USB_AT91 is not set
+# CONFIG_USB_ATMEL_USBA is not set
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_AT91=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_HID=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_AT91=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+# CONFIG_USB_PWC is not set
+CONFIG_USB_SERIAL=y
+# CONFIG_USB_SERIAL_CONSOLE is not set
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VFAT_FS=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_VIDEOMODE_HELPERS=y
+# CONFIG_VIDEO_ATMEL_ISI is not set
+# CONFIG_VIDEO_CPIA2 is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/at91/config-4.9 b/target/linux/at91/config-4.9
deleted file mode 100644
index ad18d6b..0000000
--- a/target/linux/at91/config-4.9
+++ /dev/null
@@ -1,543 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_AT91_CPUIDLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_AT91_ADC=y
-CONFIG_AT91_SAMA5D2_ADC=y
-CONFIG_ATMEL_AIC5_IRQ=y
-CONFIG_ATMEL_EBI=y
-CONFIG_ATMEL_PIT=y
-CONFIG_ATMEL_SDRAMC=y
-CONFIG_ATMEL_SSC=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-CONFIG_ATMEL_TCLIB=y
-CONFIG_AT_HDMAC=y
-CONFIG_AT_XDMAC=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_BATTERY_ACT8945A=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_SD=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_AT91=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_COREDUMP=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRASH_DUMP=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CCM=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_GHASH=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_UART_8250 is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DNOTIFY=y
-CONFIG_DRM=y
-CONFIG_DRM_ATMEL_HLCDC=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_GEM_CMA_HELPER=y
-CONFIG_DRM_KMS_CMA_HELPER=y
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-CONFIG_ELF_CORE=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-# CONFIG_FB_ATMEL is not set
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FORCE_MAX_ZONEORDER=15
-CONFIG_FREEZER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_AT91_GENERATED_CLK=y
-CONFIG_HAVE_AT91_H32MX=y
-CONFIG_HAVE_AT91_SMD=y
-CONFIG_HAVE_AT91_USB_CLK=y
-CONFIG_HAVE_AT91_UTMI=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FB_ATMEL=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HDMI=y
-CONFIG_HID=y
-CONFIG_HID_GENERIC=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_ATMEL=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_AT91=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_IIO=y
-CONFIG_IIO_BUFFER=y
-CONFIG_IIO_KFIFO_BUF=y
-CONFIG_IIO_TRIGGER=y
-CONFIG_IIO_TRIGGERED_BUFFER=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_LEDS=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-# CONFIG_JFFS2_FS is not set
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_QT1070=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGER_CPU=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=4
-CONFIG_LIBFDT=y
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACB=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANDATORY_FILE_LOCKING=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_ACT8945A=y
-CONFIG_MFD_ATMEL_FLEXCOM=y
-CONFIG_MFD_ATMEL_HLCDC=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MICREL_PHY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_OF_AT91=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ECC=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-CONFIG_MTD_UBI_FASTMAP=y
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEON=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PARTITION_ADVANCED is not set
-# CONFIG_PCI_DOMAINS_GENERIC is not set
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_AT91=y
-CONFIG_PINCTRL_AT91PIO4=y
-# CONFIG_PINCTRL_SINGLE is not set
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_PM=y
-CONFIG_PM_ADVANCED_DEBUG=y
-CONFIG_PM_CLK=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_DEBUG=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_AT91_POWEROFF=y
-CONFIG_POWER_RESET_AT91_RESET=y
-CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_PRINTK_TIME=y
-CONFIG_PROC_VMCORE=y
-CONFIG_PWM=y
-CONFIG_PWM_ATMEL=y
-CONFIG_PWM_ATMEL_HLCDC_PWM=y
-CONFIG_PWM_ATMEL_TCB=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_ACT8865=y
-CONFIG_REGULATOR_ACT8945A=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RFKILL_REGULATOR=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SAMA5D4_WATCHDOG=y
-# CONFIG_SCHED_INFO is not set
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SG_POOL=y
-CONFIG_SND=y
-CONFIG_SND_ARM=y
-# CONFIG_SND_AT73C213 is not set
-# CONFIG_SND_AT91_SOC_SAM9G20_WM8731 is not set
-# CONFIG_SND_AT91_SOC_SAM9X5_WM8731 is not set
-CONFIG_SND_ATMEL_SOC=y
-CONFIG_SND_ATMEL_SOC_CLASSD=y
-CONFIG_SND_ATMEL_SOC_DMA=y
-# CONFIG_SND_ATMEL_SOC_PDMIC is not set
-CONFIG_SND_ATMEL_SOC_SSC=y
-CONFIG_SND_ATMEL_SOC_SSC_DMA=y
-CONFIG_SND_ATMEL_SOC_WM8904=y
-# CONFIG_SND_COMPRESS_OFFLOAD is not set
-CONFIG_SND_DMAENGINE_PCM=y
-CONFIG_SND_JACK=y
-CONFIG_SND_JACK_INPUT_DEV=y
-CONFIG_SND_PCM=y
-CONFIG_SND_PCM_TIMER=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-CONFIG_SND_SOC_WM8904=y
-CONFIG_SND_SPI=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_TIMER=y
-CONFIG_SOC_BUS=y
-CONFIG_SOC_SAMA5=y
-CONFIG_SOC_SAMA5D2=y
-CONFIG_SOC_SAMA5D3=y
-CONFIG_SOC_SAMA5D4=y
-CONFIG_SOC_SAM_V7=y
-CONFIG_SOUND=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_ATMEL_QUADSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SQUASHFS is not set
-CONFIG_SRAM=y
-CONFIG_SRCU=y
-# CONFIG_STANDALONE is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-# CONFIG_SWP_EMULATE is not set
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TOUCHSCREEN_ATMEL_MXT=y
-# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
-CONFIG_TOUCHSCREEN_PROPERTIES=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_ACM=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_AT91 is not set
-# CONFIG_USB_ATMEL_USBA is not set
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_AT91=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_HID=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_AT91=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-# CONFIG_USB_PWC is not set
-CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VIDEOMODE_HELPERS=y
-# CONFIG_VIDEO_CPIA2 is not set
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/at91/legacy/config-default b/target/linux/at91/legacy/config-default
index 4f73051..a8923a6 100644
--- a/target/linux/at91/legacy/config-default
+++ b/target/linux/at91/legacy/config-default
@@ -3,6 +3,7 @@ CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V4_V5=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
 # CONFIG_ARM_AT91_CPUIDLE is not set
 CONFIG_ARM_L1_CACHE_SHIFT=5
 # CONFIG_AT91RM9200_WATCHDOG is not set
diff --git a/target/linux/at91/patches-4.14/100-ARM-at91-build-dtb-for-LMU5000.patch b/target/linux/at91/patches-4.14/100-ARM-at91-build-dtb-for-LMU5000.patch
new file mode 100644
index 0000000..c0eb6da
--- /dev/null
+++ b/target/linux/at91/patches-4.14/100-ARM-at91-build-dtb-for-LMU5000.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -33,6 +33,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
+ 	usb_a9g20.dtb \
+ 	usb_a9g20_lpw.dtb \
+ 	at91sam9m10g45ek.dtb \
++	lmu5000.dtb \
+ 	pm9g45.dtb \
+ 	at91sam9n12ek.dtb \
+ 	at91sam9rlek.dtb \
diff --git a/target/linux/at91/patches-4.14/101-ARM-at91-build-dtb-for-q5xr5.patch b/target/linux/at91/patches-4.14/101-ARM-at91-build-dtb-for-q5xr5.patch
new file mode 100644
index 0000000..6c84c94
--- /dev/null
+++ b/target/linux/at91/patches-4.14/101-ARM-at91-build-dtb-for-q5xr5.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -41,6 +41,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
+ 	at91-ariettag25.dtb \
+ 	at91-cosino_mega2560.dtb \
+ 	at91-kizboxmini.dtb \
++	at91-q5xr5.dtb \
+ 	at91sam9g15ek.dtb \
+ 	at91sam9g25ek.dtb \
+ 	at91sam9g35ek.dtb \
diff --git a/target/linux/at91/patches-4.14/102-ARM-at91-build-dtb-for-wb45n.patch b/target/linux/at91/patches-4.14/102-ARM-at91-build-dtb-for-wb45n.patch
new file mode 100644
index 0000000..f6190c4
--- /dev/null
+++ b/target/linux/at91/patches-4.14/102-ARM-at91-build-dtb-for-wb45n.patch
@@ -0,0 +1,12 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -46,7 +46,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
+ 	at91sam9g25ek.dtb \
+ 	at91sam9g35ek.dtb \
+ 	at91sam9x25ek.dtb \
+-	at91sam9x35ek.dtb
++	at91sam9x35ek.dtb \
++	wb45n.dtb
+ dtb-$(CONFIG_SOC_SAM_V7) += \
+ 	at91-kizbox2.dtb \
+ 	at91-sama5d27_som1_ek.dtb \
diff --git a/target/linux/at91/patches-4.14/103-ARM-at91-build-dtb-for-wb50n.patch b/target/linux/at91/patches-4.14/103-ARM-at91-build-dtb-for-wb50n.patch
new file mode 100644
index 0000000..324017c
--- /dev/null
+++ b/target/linux/at91/patches-4.14/103-ARM-at91-build-dtb-for-wb50n.patch
@@ -0,0 +1,12 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -63,7 +63,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
+ 	at91-sama5d4_ma5d4evk.dtb \
+ 	at91-sama5d4_xplained.dtb \
+ 	at91-sama5d4ek.dtb \
+-	at91-vinco.dtb
++	at91-vinco.dtb \
++	wb50n.dtb
+ dtb-$(CONFIG_ARCH_ATLAS6) += \
+ 	atlas6-evb.dtb
+ dtb-$(CONFIG_ARCH_ATLAS7) += \
diff --git a/target/linux/at91/patches-4.14/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch b/target/linux/at91/patches-4.14/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch
new file mode 100644
index 0000000..b3bede4
--- /dev/null
+++ b/target/linux/at91/patches-4.14/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch
@@ -0,0 +1,434 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -50,6 +50,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
+ 	wb45n.dtb
+ dtb-$(CONFIG_SOC_SAM_V7) += \
+ 	at91-kizbox2.dtb \
++	at91-sama5d2_ptc_ek.dtb \
+ 	at91-sama5d27_som1_ek.dtb \
+ 	at91-sama5d2_xplained.dtb \
+ 	at91-sama5d3_xplained.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+@@ -0,0 +1,421 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR X11)
++/*
++ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
++ *
++ *  Copyright (C) 2017 Microchip/Atmel,
++ *		  2017 Wenyou Yang <wenyou.yang at microchip.com>
++ *		  2017 Ludovic Desroches <ludovic.desroches at microchip.com>
++ */
++/dts-v1/;
++#include "sama5d2.dtsi"
++#include "sama5d2-pinfunc.h"
++#include <dt-bindings/mfd/atmel-flexcom.h>
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/pinctrl/at91.h>
++
++/ {
++	model = "Atmel SAMA5D2 PTC EK";
++	compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
++
++	aliases {
++		serial0 = &uart0;
++		i2c0	= &i2c0;
++		i2c1	= &i2c1;
++		i2c2	= &i2c2;
++	};
++
++	chosen {
++		stdout-path = "serial0:115200n8";
++	};
++
++	memory {
++		reg = <0x20000000 0x80000>;
++	};
++
++	clocks {
++		slow_xtal {
++			clock-frequency = <32768>;
++		};
++
++		main_xtal {
++			clock-frequency = <24000000>;
++		};
++	};
++
++	ahb {
++		usb0: gadget at 00300000 {
++			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
++			pinctrl-names = "default";
++			pinctrl-0 = <&pinctrl_usba_vbus>;
++			status = "okay";
++		};
++
++		usb1: ohci at 00400000 {
++			num-ports = <3>;
++			atmel,vbus-gpio = <0
++					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
++					   0
++					  >;
++			pinctrl-names = "default";
++			pinctrl-0 = <&pinctrl_usb_default>;
++			status = "okay";
++		};
++
++		usb2: ehci at 00500000 {
++			status = "okay";
++		};
++
++		nand0: nand at 80000000 {
++			nand-bus-width = <8>;
++			nand-ecc-mode = "hw";
++			nand-on-flash-bbt;
++			atmel,has-pmecc;
++			pinctrl-names = "default";
++			pinctrl-0 = <&pinctrl_nand_default>;
++			status = "okay"; /* conflicts with sdmmc1 and qspi0 */
++
++			at91bootstrap at 0 {
++				label = "bootstrap";
++				reg = <0x0 0x40000>;
++			};
++
++			bootloader at 40000 {
++				label = "bootloader";
++				reg = <0x40000 0xc0000>;
++			};
++
++			bootloaderenv at 0x100000 {
++				label = "bootloader env";
++				reg = <0x100000 0x40000>;
++			};
++
++			bootloaderenvred at 0x140000 {
++				label = "bootloader env redundant";
++				reg = <0x140000 0x40000>;
++			};
++
++			dtb at 180000 {
++				label = "device tree";
++				reg = <0x180000 0x80000>;
++			};
++
++			kernel at 200000 {
++				label = "kernel";
++				reg = <0x200000 0x600000>;
++			};
++
++			rootfs at 800000 {
++				label = "rootfs";
++				reg = <0x800000 0x1f800000>;
++			};
++		};
++
++		sdmmc0: sdio-host at a0000000 {
++			bus-width = <8>;
++			pinctrl-names = "default";
++			pinctrl-0 = <&pinctrl_sdmmc0_default>;
++			status = "okay";
++		};
++
++		apb {
++			pmc: pmc at f0014000 {
++				pmc_fast_restart {
++					compatible = "atmel,sama5d2-pmc-fast-startup";
++					#address-cells = <1>;
++					#size-cells = <0>;
++
++					atmel,wakeup-rtc-timer;
++
++					wkpin: input at 0 {
++						reg = <0>;
++					};
++
++					gmac_wol: input at 10 {
++						reg = <10>;
++						atmel,wakeup-active-high;
++					};
++				};
++			};
++
++			spi0: spi at f8000000 {
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_spi0_default>;
++				status = "okay";
++
++				/*
++				m25p80 at 0 {
++					compatible = "atmel,at25df321a";
++					reg = <0>;
++					spi-max-frequency = <50000000>;
++				};
++				*/
++			};
++
++			macb0: ethernet at f8008000 {
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
++				phy-mode = "rmii";
++				status = "okay";
++
++				ethernet-phy at 1 {
++					reg = <0x1>;
++					interrupt-parent = <&pioA>;
++					interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
++				};
++			};
++
++			uart0: serial at f801c000 {
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_uart0_default>;
++				atmel,use-dma-rx;
++				atmel,use-dma-tx;
++				status = "okay";
++			};
++
++			uart2: serial at f8024000 {
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_uart2_default>;
++				atmel,use-dma-rx;
++				atmel,use-dma-tx;
++				status = "okay";
++			};
++
++			i2c0: i2c at f8028000 {
++				dmas = <0>, <0>;
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_i2c0_default>;
++				i2c-sda-hold-time-ns = <350>;
++				status = "okay";
++			};
++
++			flx0: flexcom at f8034000 {
++				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
++				status = "okay";
++
++				i2c2: i2c at 600 {
++					compatible = "atmel,sama5d2-i2c";
++					reg = <0x600 0x200>;
++					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
++					dmas = <0>, <0>;
++					dma-names = "tx", "rx";
++					#address-cells = <1>;
++					#size-cells = <0>;
++					clocks = <&flx0_clk>;
++					pinctrl-names = "default";
++					pinctrl-0 = <&pinctrl_flx0_default>;
++					atmel,fifo-size = <16>;
++					status = "okay";
++				};
++			};
++
++			shdwc at f8048010 {
++				atmel,shdwc-debouncer = <976>;
++
++				input at 0 {
++					reg = <0>;
++					atmel,wakeup-type = "low";
++				};
++			};
++
++			watchdog at f8048040 {
++				status = "okay";
++			};
++
++			spi1: spi at fc000000 {
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_spi1_default>;
++				status = "okay";
++			};
++
++			i2c1: i2c at fc028000 {
++				dmas = <0>, <0>;
++				pinctrl-names = "default";
++				pinctrl-0 = <&pinctrl_i2c1_default>;
++				status = "okay";
++
++				at24 at 50 {
++					compatible = "24c02";
++					reg = <0x50>;
++					pagesize = <8>;
++				};
++			};
++
++			pinctrl at fc038000 {
++				pinctrl_flx0_default: flx0_default {
++					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
++						 <PIN_PB29__FLEXCOM0_IO1>;
++					bias-disable;
++				};
++
++				pinctrl_i2c0_default: i2c0_default {
++					pinmux = <PIN_PD21__TWD0>,
++						 <PIN_PD22__TWCK0>;
++					bias-disable;
++				};
++
++				pinctrl_i2c1_default: i2c1_default {
++					pinmux = <PIN_PC6__TWD1>,
++						 <PIN_PC7__TWCK1>;
++					bias-disable;
++				};
++
++				pinctrl_key_gpio_default: key_gpio_default {
++					pinmux = <PIN_PA10__GPIO>;
++					bias-pull-up;
++				};
++
++				pinctrl_led_gpio_default: led_gpio_default {
++					pinmux = <PIN_PB6__GPIO>,
++						 <PIN_PB8__GPIO>,
++						 <PIN_PB10__GPIO>;
++					bias-pull-up;
++				};
++
++				pinctrl_macb0_default: macb0_default {
++					pinmux = <PIN_PB14__GTXCK>,
++						 <PIN_PB15__GTXEN>,
++						 <PIN_PB16__GRXDV>,
++						 <PIN_PB17__GRXER>,
++						 <PIN_PB18__GRX0>,
++						 <PIN_PB19__GRX1>,
++						 <PIN_PB20__GTX0>,
++						 <PIN_PB21__GTX1>,
++						 <PIN_PB22__GMDC>,
++						 <PIN_PB23__GMDIO>;
++					bias-disable;
++				};
++
++				pinctrl_macb0_phy_irq: macb0_phy_irq {
++					pinmux = <PIN_PB24__GPIO>;
++					bias-disable;
++				};
++
++				pinctrl_nand_default: nand_default {
++					re_we_data {
++						pinmux = <PIN_PA22__D0>,
++							 <PIN_PA23__D1>,
++							 <PIN_PA24__D2>,
++							 <PIN_PA25__D3>,
++							 <PIN_PA26__D4>,
++							 <PIN_PA27__D5>,
++							 <PIN_PA28__D6>,
++							 <PIN_PA29__D7>,
++							 <PIN_PA30__NWE_NANDWE>,
++							 <PIN_PB2__NRD_NANDOE>;
++						bias-pull-up;
++					};
++
++					ale_cle_rdy_cs {
++						pinmux = <PIN_PB0__A21_NANDALE>,
++							 <PIN_PB1__A22_NANDCLE>,
++							 <PIN_PC8__NANDRDY>,
++							 <PIN_PA31__NCS3>;
++						bias-pull-up;
++					};
++				};
++
++				pinctrl_sdmmc0_default: sdmmc0_default {
++					cmd_data {
++						pinmux = <PIN_PA1__SDMMC0_CMD>,
++							 <PIN_PA2__SDMMC0_DAT0>,
++							 <PIN_PA3__SDMMC0_DAT1>,
++							 <PIN_PA4__SDMMC0_DAT2>,
++							 <PIN_PA5__SDMMC0_DAT3>,
++							 <PIN_PA6__SDMMC0_DAT4>,
++							 <PIN_PA7__SDMMC0_DAT5>,
++							 <PIN_PA8__SDMMC0_DAT6>,
++							 <PIN_PA9__SDMMC0_DAT7>;
++						bias-pull-up;
++					};
++
++					ck_cd_vddsel {
++						pinmux = <PIN_PA0__SDMMC0_CK>,
++							 <PIN_PA11__SDMMC0_VDDSEL>,
++							 <PIN_PA13__SDMMC0_CD>;
++						bias-disable;
++					};
++				};
++
++				pinctrl_spi0_default: spi0_default {
++					pinmux = <PIN_PA14__SPI0_SPCK>,
++						 <PIN_PA15__SPI0_MOSI>,
++						 <PIN_PA16__SPI0_MISO>,
++						 <PIN_PA17__SPI0_NPCS0>;
++					bias-disable;
++				};
++
++				pinctrl_spi1_default: spi1_default {
++					pinmux = <PIN_PC1__SPI1_SPCK>,
++						 <PIN_PC2__SPI1_MOSI>,
++						 <PIN_PC3__SPI1_MISO>,
++						 <PIN_PC4__SPI1_NPCS0>;
++					bias-disable;
++				};
++
++				pinctrl_uart0_default: uart0_default {
++					pinmux = <PIN_PB26__URXD0>,
++						 <PIN_PB27__UTXD0>;
++					bias-disable;
++				};
++
++				pinctrl_uart2_default: uart2_default {
++					pinmux = <PIN_PD23__URXD2>,
++						 <PIN_PD24__UTXD2>;
++					bias-disable;
++				};
++
++				pinctrl_usb_default: usb_default {
++					pinmux = <PIN_PB12__GPIO>;
++					bias-disable;
++				};
++
++				pinctrl_usba_vbus: usba_vbus {
++					pinmux = <PIN_PB11__GPIO>;
++					bias-disable;
++				};
++
++			};
++
++			ptc at fc060000 {
++				status = "okay";
++			};
++		};
++	};
++
++	gpio_keys {
++		compatible = "gpio-keys";
++
++		pinctrl-names = "default";
++		pinctrl-0 = <&pinctrl_key_gpio_default>;
++
++		bp1 {
++			label = "PB_USER";
++			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
++			linux,code = <0x104>;
++			wakeup-source;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++		pinctrl-names = "default";
++		pinctrl-0 = <&pinctrl_led_gpio_default>;
++		status = "okay";
++
++		red {
++			label = "red";
++			gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
++		};
++
++		green {
++			label = "green";
++			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
++		};
++
++		blue {
++			label = "blue";
++			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "heartbeat";
++		};
++	};
++};
diff --git a/target/linux/at91/patches-4.9/100-ARM-at91-build-dtb-for-LMU5000.patch b/target/linux/at91/patches-4.9/100-ARM-at91-build-dtb-for-LMU5000.patch
deleted file mode 100644
index 2a64fb8..0000000
--- a/target/linux/at91/patches-4.9/100-ARM-at91-build-dtb-for-LMU5000.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -32,6 +32,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
- 	usb_a9g20.dtb \
- 	usb_a9g20_lpw.dtb \
- 	at91sam9m10g45ek.dtb \
-+	lmu5000.dtb \
- 	pm9g45.dtb \
- 	at91sam9n12ek.dtb \
- 	at91sam9rlek.dtb \
diff --git a/target/linux/at91/patches-4.9/101-ARM-at91-build-dtb-for-q5xr5.patch b/target/linux/at91/patches-4.9/101-ARM-at91-build-dtb-for-q5xr5.patch
deleted file mode 100644
index 1cee558..0000000
--- a/target/linux/at91/patches-4.9/101-ARM-at91-build-dtb-for-q5xr5.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -40,6 +40,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
- 	at91-ariettag25.dtb \
- 	at91-cosino_mega2560.dtb \
- 	at91-kizboxmini.dtb \
-+	at91-q5xr5.dtb \
- 	at91sam9g15ek.dtb \
- 	at91sam9g25ek.dtb \
- 	at91sam9g35ek.dtb \
diff --git a/target/linux/at91/patches-4.9/102-ARM-at91-build-dtb-for-wb45n.patch b/target/linux/at91/patches-4.9/102-ARM-at91-build-dtb-for-wb45n.patch
deleted file mode 100644
index aeb523a..0000000
--- a/target/linux/at91/patches-4.9/102-ARM-at91-build-dtb-for-wb45n.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -45,7 +45,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
- 	at91sam9g25ek.dtb \
- 	at91sam9g35ek.dtb \
- 	at91sam9x25ek.dtb \
--	at91sam9x35ek.dtb
-+	at91sam9x35ek.dtb \
-+	wb45n.dtb
- dtb-$(CONFIG_SOC_SAM_V7) += \
- 	at91-kizbox2.dtb \
- 	at91-sama5d2_xplained.dtb \
diff --git a/target/linux/at91/patches-4.9/103-ARM-at91-build-dtb-for-wb50n.patch b/target/linux/at91/patches-4.9/103-ARM-at91-build-dtb-for-wb50n.patch
deleted file mode 100644
index a30a803..0000000
--- a/target/linux/at91/patches-4.9/103-ARM-at91-build-dtb-for-wb50n.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -59,7 +59,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
- 	at91-sama5d4_ma5d4evk.dtb \
- 	at91-sama5d4_xplained.dtb \
- 	at91-sama5d4ek.dtb \
--	at91-vinco.dtb
-+	at91-vinco.dtb \
-+	wb50n.dtb
- dtb-$(CONFIG_ARCH_ATLAS6) += \
- 	atlas6-evb.dtb
- dtb-$(CONFIG_ARCH_ATLAS7) += \
diff --git a/target/linux/at91/patches-4.9/104-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch b/target/linux/at91/patches-4.9/104-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch
deleted file mode 100644
index 20c69f3..0000000
--- a/target/linux/at91/patches-4.9/104-ARM-at91-build-dtb-for-sama5d27-SOM1-Ek.patch
+++ /dev/null
@@ -1,893 +0,0 @@
---- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
-+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
-@@ -35,7 +35,12 @@ right representation of the pin.
- Optional properties:
- - GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable,
- bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable,
--input-debounce, output-low, output-high.
-+input-debounce, output-low, output-high, drive-strength.
-+
-+Concerning the drive-strength property, the values accepted are
-+ATMEL_PIO_DRVSTR_LO, ATMEL_PIO_DRVSTR_ME, ATMEL_PIO_DRVSTR_HI. The current
-+depends on VDDIOP. You can find the details in the DC Characteristics table
-+from the datasheet.
- 
- Example:
- 
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -49,6 +49,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
- 	wb45n.dtb
- dtb-$(CONFIG_SOC_SAM_V7) += \
- 	at91-kizbox2.dtb \
-+	at91-sama5d27_som1_ek.dtb \
- 	at91-sama5d2_xplained.dtb \
- 	at91-sama5d3_xplained.dtb \
- 	sama5d31ek.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
-@@ -0,0 +1,175 @@
-+/*
-+ * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
-+ *
-+ *  Copyright (c) 2017, Microchip Technology Inc.
-+ *                2017 Cristian Birsan <cristian.birsan at microchip.com>
-+ *                2017 Claudiu Beznea <claudiu.beznea at microchip.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+#include "sama5d2.dtsi"
-+#include "sama5d2-pinfunc.h"
-+
-+/ {
-+	model = "Atmel SAMA5D27 SoM1";
-+	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
-+
-+	clocks {
-+		slow_xtal {
-+			clock-frequency = <32768>;
-+		};
-+
-+		main_xtal {
-+			clock-frequency = <24000000>;
-+		};
-+	};
-+
-+	ahb {
-+		apb {
-+			qspi1: spi at f0024000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_qspi1_default>;
-+
-+				flash at 0 {
-+					#address-cells = <1>;
-+					#size-cells = <1>;
-+					compatible = "jedec,spi-nor";
-+					reg = <0>;
-+					spi-max-frequency = <80000000>;
-+					m25p,fast-read;
-+
-+					at91bootstrap at 00000000 {
-+						label = "at91bootstrap";
-+						reg = <0x00000000 0x00010000>;
-+					};
-+
-+					bootloader at 00010000 {
-+						label = "bootloader";
-+						reg = <0x00010000 0x000a0000>;
-+					};
-+
-+					bootloaderenv at 000b0000 {
-+						label = "bootloader env";
-+						reg = <0x000b0000 0x00010000>;
-+					};
-+
-+					dtb at 000c0000 {
-+						label = "device tree";
-+						reg = <0x000c0000 0x0020000>;
-+					};
-+
-+					kernel at 000e0000 {
-+						label = "kernel";
-+						reg = <0x000e0000 0x0400000>;
-+					};
-+				};
-+			};
-+
-+			macb0: ethernet at f8008000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_macb0_default>;
-+				phy-mode = "rmii";
-+
-+				ethernet-phy at 0 {
-+					reg = <0x0>;
-+					interrupt-parent = <&pioA>;
-+					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_macb0_phy_irq>;
-+				};
-+			};
-+
-+			i2c0: i2c at f8028000 {
-+				dmas = <0>, <0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_i2c0_default>;
-+				status = "okay";
-+
-+				at24 at 50 {
-+					compatible = "24c02";
-+					reg = <0x50>;
-+					pagesize = <8>;
-+				};
-+			};
-+
-+			pinctrl at fc038000 {
-+				pinctrl_i2c0_default: i2c0_default {
-+					pinmux = <PIN_PD21__TWD0>,
-+						 <PIN_PD22__TWCK0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_qspi1_default: qspi1_default {
-+					sck_cs {
-+						pinmux = <PIN_PB5__QSPI1_SCK>,
-+							 <PIN_PB6__QSPI1_CS>;
-+						bias-disable;
-+					};
-+
-+					data {
-+						pinmux = <PIN_PB7__QSPI1_IO0>,
-+							 <PIN_PB8__QSPI1_IO1>,
-+							 <PIN_PB9__QSPI1_IO2>,
-+							 <PIN_PB10__QSPI1_IO3>;
-+						bias-pull-up;
-+					};
-+				};
-+
-+				pinctrl_macb0_default: macb0_default {
-+					pinmux = <PIN_PD9__GTXCK>,
-+						 <PIN_PD10__GTXEN>,
-+						 <PIN_PD11__GRXDV>,
-+						 <PIN_PD12__GRXER>,
-+						 <PIN_PD13__GRX0>,
-+						 <PIN_PD14__GRX1>,
-+						 <PIN_PD15__GTX0>,
-+						 <PIN_PD16__GTX1>,
-+						 <PIN_PD17__GMDC>,
-+						 <PIN_PD18__GMDIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_macb0_phy_irq: macb0_phy_irq {
-+					pinmux = <PIN_PD31__GPIO>;
-+					bias-disable;
-+				};
-+			};
-+		};
-+	};
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
-@@ -0,0 +1,53 @@
-+/*
-+ * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
-+ *
-+ *  Copyright (c) 2017, Microchip Technology Inc.
-+ *                2016 Nicolas Ferre <nicolas.ferre at atmel.com>
-+ *                2017 Cristian Birsan <cristian.birsan at microchip.com>
-+ *                2017 Claudiu Beznea <claudiu.beznea at microchip.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+/dts-v1/;
-+#include "at91-sama5d27_som1_ek_common.dtsi"
-+
-+/ {
-+	model = "Atmel SAMA5D27 SOM1 EK";
-+	compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek_common.dtsi
-@@ -0,0 +1,619 @@
-+/*
-+ * at91-sama5d27_som1_ek_common.dtsi - Device Tree file for SAMA5D27-SOM1-EK board
-+ *
-+ *  Copyright (c) 2017, Microchip Technology Inc.
-+ *                2016 Nicolas Ferre <nicolas.ferre at atmel.com>
-+ *                2017 Cristian Birsan <cristian.birsan at microchip.com>
-+ *                2017 Claudiu Beznea <claudiu.beznea at microchip.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+#include "at91-sama5d27_som1.dtsi"
-+#include <dt-bindings/mfd/atmel-flexcom.h>
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/pinctrl/at91.h>
-+
-+/ {
-+	model = "Atmel SAMA5D27 SOM1 EK";
-+	compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
-+
-+	aliases {
-+		serial0 = &uart1;	/* DBGU */
-+		serial1 = &uart4;	/* mikro BUS 1 */
-+		serial2 = &uart2;	/* mikro BUS 2 */
-+		i2c1	= &i2c1;
-+		i2c2	= &i2c2;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	ahb {
-+		usb0: gadget at 00300000 {
-+			atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_usba_vbus>;
-+			status = "okay";
-+		};
-+
-+		usb1: ohci at 00400000 {
-+			num-ports = <3>;
-+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
-+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
-+					   0
-+					  >;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_usb_default>;
-+			status = "okay";
-+		};
-+
-+		usb2: ehci at 00500000 {
-+			status = "okay";
-+		};
-+
-+		sdmmc0: sdio-host at a0000000 {
-+			bus-width = <8>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
-+			status = "okay";
-+		};
-+
-+		sdmmc1: sdio-host at b0000000 {
-+			bus-width = <4>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
-+			status = "okay";
-+		};
-+
-+		apb {
-+			hlcdc: hlcdc at f0000000 {
-+				status = "disabled";
-+
-+				hlcdc-display-controller {
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb>;
-+				};
-+
-+				hlcdc_pwm: hlcdc-pwm {
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_lcd_pwm>;
-+				};
-+			};
-+
-+			pmc: pmc at f0014000 {
-+				pmc_fast_restart {
-+					compatible = "atmel,sama5d2-pmc-fast-startup";
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+
-+					atmel,wakeup-rtc-timer;
-+
-+					wkpin: input at 0 {
-+						reg = <0>;
-+					};
-+
-+					gmac_wol: input at 10 {
-+						reg = <10>;
-+						atmel,wakeup-active-high;
-+					};
-+				};
-+			};
-+
-+			isc: isc at f0008000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
-+				status = "okay";
-+			};
-+
-+			qspi1: spi at f0024000 {
-+				status = "okay";
-+			};
-+
-+			spi0: spi at f8000000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_spi0_default>;
-+				status = "okay";
-+			};
-+
-+			macb0: ethernet at f8008000 {
-+				status = "okay";
-+			};
-+
-+			uart1: serial at f8020000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_uart1_default>;
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "okay";
-+			};
-+
-+			uart2: serial at f8024000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_mikrobus2_uart>;
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "okay";
-+			};
-+
-+			pwm0: pwm at f802c000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
-+				status = "disabled"; /* Conflict with leds. */
-+			};
-+
-+			flx1: flexcom at f8038000 {
-+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-+				status = "okay";
-+
-+				i2c2: i2c at 600 {
-+					compatible = "atmel,sama5d2-i2c";
-+					reg = <0x600 0x200>;
-+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
-+					dmas = <0>, <0>;
-+					dma-names = "tx", "rx";
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					clocks = <&flx1_clk>;
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_mikrobus_i2c>;
-+					atmel,fifo-size = <16>;
-+					status = "okay";
-+				};
-+			};
-+
-+			shdwc at f8048010 {
-+				atmel,shdwc-debouncer = <976>;
-+				atmel,wakeup-rtc-timer;
-+
-+				input at 0 {
-+					reg = <0>;
-+					atmel,wakeup-type = "low";
-+				};
-+			};
-+
-+			watchdog at f8048040 {
-+				status = "okay";
-+			};
-+
-+			uart3: serial at fc008000 {
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_uart3_default>;
-+				status = "disabled"; /* Conflict with isc. */
-+			};
-+
-+			uart4: serial at fc00c000 {
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_mikrobus1_uart>;
-+				status = "okay";
-+			};
-+
-+			flx3: flexcom at fc014000 {
-+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
-+				status = "disabled";
-+
-+				uart7: serial at 200 {
-+					compatible = "atmel,at91sam9260-usart";
-+					reg = <0x200 0x200>;
-+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
-+					clocks = <&flx3_clk>;
-+					clock-names = "usart";
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_flx3_default>;
-+					atmel,fifo-size = <32>;
-+					status = "disabled"; /* Conflict with isc. */
-+				};
-+
-+				spi2: spi at 400 {
-+					compatible = "atmel,at91rm9200-spi";
-+					reg = <0x400 0x200>;
-+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
-+					clocks = <&flx3_clk>;
-+					clock-names = "spi_clk";
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_flx3_default>;
-+					atmel,fifo-size = <16>;
-+					status = "disabled"; /* Conflict with isc. */
-+				};
-+			};
-+
-+			flx4: flexcom at fc018000 {
-+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
-+				status = "okay";
-+
-+				uart6: serial at 200 {
-+					compatible = "atmel,at91sam9260-usart";
-+					reg = <0x200 0x200>;
-+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
-+					clocks = <&flx4_clk>;
-+					clock-names = "usart";
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_flx4_default>;
-+					atmel,fifo-size = <32>;
-+					status = "disabled"; /* Conflict with spi3 and i2c3. */
-+				};
-+
-+				spi3: spi at 400 {
-+					compatible = "atmel,at91rm9200-spi";
-+					reg = <0x400 0x200>;
-+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
-+					clocks = <&flx4_clk>;
-+					clock-names = "spi_clk";
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
-+					atmel,fifo-size = <16>;
-+					status = "okay";
-+				};
-+
-+				i2c3: i2c at 600 {
-+					compatible = "atmel,sama5d2-i2c";
-+					reg = <0x600 0x200>;
-+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
-+					dmas = <0>, <0>;
-+					dma-names = "tx", "rx";
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					clocks = <&flx4_clk>;
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_flx4_default>;
-+					atmel,fifo-size = <16>;
-+					status = "disabled"; /* Conflict with uart6 and spi3. */
-+				};
-+			};
-+
-+			i2c1: i2c at fc028000 {
-+				dmas = <0>, <0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_i2c1_default>;
-+				status = "okay";
-+			};
-+
-+			pinctrl at fc038000 {
-+
-+				pinctrl_lcd_base: pinctrl_lcd_base {
-+					pinmux = <PIN_PC5__LCDVSYNC>,
-+						 <PIN_PC6__LCDHSYNC>,
-+						 <PIN_PC8__LCDDEN>,
-+						 <PIN_PC7__LCDPCK>;
-+					bias-disable;
-+					drive-strength = <ATMEL_PIO_DRVSTR_ME>;
-+				};
-+
-+				pinctrl_lcd_rgb: pinctrl_lcd_rgb {
-+					pinmux = <PIN_PB11__LCDDAT0>,
-+						 <PIN_PB12__LCDDAT1>,
-+						 <PIN_PB13__LCDDAT2>,
-+						 <PIN_PB14__LCDDAT3>,
-+						 <PIN_PB15__LCDDAT4>,
-+						 <PIN_PB16__LCDDAT5>,
-+						 <PIN_PB17__LCDDAT6>,
-+						 <PIN_PB18__LCDDAT7>,
-+						 <PIN_PB19__LCDDAT8>,
-+						 <PIN_PB20__LCDDAT9>,
-+						 <PIN_PB21__LCDDAT10>,
-+						 <PIN_PB22__LCDDAT11>,
-+						 <PIN_PB23__LCDDAT12>,
-+						 <PIN_PB24__LCDDAT13>,
-+						 <PIN_PB25__LCDDAT14>,
-+						 <PIN_PB26__LCDDAT15>,
-+						 <PIN_PB27__LCDDAT16>,
-+						 <PIN_PB28__LCDDAT17>,
-+						 <PIN_PB29__LCDDAT18>,
-+						 <PIN_PB30__LCDDAT19>,
-+						 <PIN_PB31__LCDDAT20>,
-+						 <PIN_PC0__LCDDAT21>,
-+						 <PIN_PC1__LCDDAT22>,
-+						 <PIN_PC2__LCDDAT23>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_lcd_pwm: pinctrl_lcd_pwm {
-+					pinmux = <PIN_PC3__LCDPWM>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_can1_default: can1_default {
-+					pinmux = <PIN_PC26__CANTX1>,
-+						 <PIN_PC27__CANRX1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_flx3_default: flx3_default {
-+					pinmux = <PIN_PC20__FLEXCOM3_IO0>,
-+						 <PIN_PC19__FLEXCOM3_IO1>,
-+						 <PIN_PC18__FLEXCOM3_IO2>,
-+						 <PIN_PC21__FLEXCOM3_IO3>,
-+						 <PIN_PC22__FLEXCOM3_IO4>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_i2c1_default: i2c1_default {
-+					pinmux = <PIN_PD4__TWD1>,
-+						 <PIN_PD5__TWCK1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_isc_base: isc_base {
-+					pinmux = <PIN_PC21__ISC_PCK>,
-+						 <PIN_PC22__ISC_VSYNC>,
-+						 <PIN_PC23__ISC_HSYNC>,
-+						 <PIN_PC24__ISC_MCK>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_isc_data_8bit: isc_data_8bit {
-+					pinmux = <PIN_PC20__ISC_D11>,
-+						 <PIN_PC19__ISC_D10>,
-+						 <PIN_PC18__ISC_D9>,
-+						 <PIN_PC17__ISC_D8>,
-+						 <PIN_PC16__ISC_D7>,
-+						 <PIN_PC15__ISC_D6>,
-+						 <PIN_PC14__ISC_D5>,
-+						 <PIN_PC13__ISC_D4>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_isc_data_9_10: isc_data_9_10 {
-+					pinmux = <PIN_PC12__ISC_D3>,
-+						 <PIN_PC11__ISC_D2>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_isc_data_11_12: isc_data_11_12 {
-+					pinmux = <PIN_PC10__ISC_D1>,
-+						 <PIN_PC9__ISC_D0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_key_gpio_default: key_gpio_default {
-+					pinmux = <PIN_PA29__GPIO>;
-+					bias-pull-up;
-+				};
-+
-+				pinctrl_led_gpio_default: led_gpio_default {
-+					pinmux = <PIN_PA10__GPIO>,
-+						 <PIN_PB1__GPIO>,
-+						 <PIN_PA31__GPIO>;
-+					bias-pull-up;
-+				};
-+
-+				pinctrl_sdmmc0_default: sdmmc0_default {
-+					cmd_data {
-+						pinmux = <PIN_PA1__SDMMC0_CMD>,
-+							 <PIN_PA2__SDMMC0_DAT0>,
-+							 <PIN_PA3__SDMMC0_DAT1>,
-+							 <PIN_PA4__SDMMC0_DAT2>,
-+							 <PIN_PA5__SDMMC0_DAT3>,
-+							 <PIN_PA6__SDMMC0_DAT4>,
-+							 <PIN_PA7__SDMMC0_DAT5>,
-+							 <PIN_PA8__SDMMC0_DAT6>,
-+							 <PIN_PA9__SDMMC0_DAT7>;
-+						bias-disable;
-+					};
-+
-+					ck_cd_vddsel {
-+						pinmux = <PIN_PA0__SDMMC0_CK>,
-+							 <PIN_PA11__SDMMC0_VDDSEL>,
-+							 <PIN_PA13__SDMMC0_CD>;
-+						bias-disable;
-+					};
-+				};
-+
-+				pinctrl_sdmmc1_default: sdmmc1_default {
-+					cmd_data {
-+						pinmux = <PIN_PA28__SDMMC1_CMD>,
-+							 <PIN_PA18__SDMMC1_DAT0>,
-+							 <PIN_PA19__SDMMC1_DAT1>,
-+							 <PIN_PA20__SDMMC1_DAT2>,
-+							 <PIN_PA21__SDMMC1_DAT3>;
-+						bias-disable;
-+					};
-+
-+					conf-ck_cd {
-+						pinmux = <PIN_PA22__SDMMC1_CK>,
-+							 <PIN_PA30__SDMMC1_CD>;
-+						bias-disable;
-+					};
-+				};
-+
-+				pinctrl_spi0_default: spi0_default {
-+					pinmux = <PIN_PA14__SPI0_SPCK>,
-+						 <PIN_PA15__SPI0_MOSI>,
-+						 <PIN_PA16__SPI0_MISO>,
-+						 <PIN_PA17__SPI0_NPCS0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_uart1_default: uart1_default {
-+					pinmux = <PIN_PD2__URXD1>,
-+						 <PIN_PD3__UTXD1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_uart3_default: uart3_default {
-+					pinmux = <PIN_PC12__URXD3>,
-+						 <PIN_PC13__UTXD3>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_usb_default: usb_default {
-+					pinmux = <PIN_PA27__GPIO>,
-+						 <PIN_PD19__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_usba_vbus: usba_vbus {
-+					pinmux = <PIN_PD20__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus1_an: mikrobus1_an {
-+					pinmux = <PIN_PD25__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus2_an: mikrobus2_an {
-+					pinmux = <PIN_PD26__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus1_rst: mikrobus1_rst {
-+					pinmux = <PIN_PB2__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus2_rst: mikrobus2_rst {
-+					pinmux = <PIN_PA26__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
-+					pinmux = <PIN_PD0__FLEXCOM4_IO4>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
-+					pinmux = <PIN_PC31__FLEXCOM4_IO3>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus_spi: mikrobus_spi {
-+					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
-+						 <PIN_PC29__FLEXCOM4_IO1>,
-+						 <PIN_PC30__FLEXCOM4_IO2>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus1_pwm: mikrobus1_pwm {
-+					pinmux = <PIN_PB1__PWML1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus2_pwm: mikrobus2_pwm {
-+					pinmux = <PIN_PA31__PWML0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus1_int: mikrobus1_int {
-+					pinmux = <PIN_PB0__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus2_int: mikrobus2_int {
-+					pinmux = <PIN_PA25__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus1_uart: mikrobus1_uart {
-+					pinmux = <PIN_PB3__URXD4>,
-+						 <PIN_PB4__UTXD4>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus2_uart: mikrobus2_uart {
-+					pinmux = <PIN_PD23__URXD2>,
-+						 <PIN_PD24__UTXD2>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_mikrobus_i2c: mikrobus1_i2c {
-+					pinmux = <PIN_PA24__FLEXCOM1_IO0>,
-+						 <PIN_PA23__FLEXCOM1_IO1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_flx4_default: flx4_uart_default {
-+					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
-+						 <PIN_PC29__FLEXCOM4_IO1>,
-+						 <PIN_PC30__FLEXCOM4_IO2>,
-+						 <PIN_PC31__FLEXCOM4_IO3>,
-+						 <PIN_PD0__FLEXCOM4_IO4>;
-+					bias-disable;
-+				};
-+			};
-+
-+			can1: can at fc050000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_can1_default>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_key_gpio_default>;
-+
-+		pb4 {
-+			label = "USER";
-+			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
-+			linux,code = <0x104>;
-+			wakeup-source;
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_led_gpio_default>;
-+		status = "okay"; /* Conflict with pwm0. */
-+
-+		red {
-+			label = "red";
-+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		green {
-+			label = "green";
-+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		blue {
-+			label = "blue";
-+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "heartbeat";
-+		};
-+	};
-+};
---- a/include/dt-bindings/pinctrl/at91.h
-+++ b/include/dt-bindings/pinctrl/at91.h
-@@ -37,4 +37,8 @@
- #define AT91_PERIPH_C		3
- #define AT91_PERIPH_D		4
- 
-+#define ATMEL_PIO_DRVSTR_LO	1
-+#define ATMEL_PIO_DRVSTR_ME	2
-+#define ATMEL_PIO_DRVSTR_HI	3
-+
- #endif /* __DT_BINDINGS_AT91_PINCTRL_H__ */
diff --git a/target/linux/at91/patches-4.9/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch b/target/linux/at91/patches-4.9/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch
deleted file mode 100644
index e33840c..0000000
--- a/target/linux/at91/patches-4.9/105-ARM-at91-build-dtb-for-sama5d2-ptc-Ek.patch
+++ /dev/null
@@ -1,435 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -49,6 +49,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
- 	wb45n.dtb
- dtb-$(CONFIG_SOC_SAM_V7) += \
- 	at91-kizbox2.dtb \
-+	at91-sama5d2_ptc_ek.dtb \
- 	at91-sama5d27_som1_ek.dtb \
- 	at91-sama5d2_xplained.dtb \
- 	at91-sama5d3_xplained.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
-@@ -0,0 +1,422 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
-+/*
-+ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
-+ *
-+ *  Copyright (C) 2017 Microchip/Atmel,
-+ *		  2017 Wenyou Yang <wenyou.yang at microchip.com>
-+ *		  2017 Ludovic Desroches <ludovic.desroches at microchip.com>
-+ */
-+/dts-v1/;
-+#include "sama5d2.dtsi"
-+#include "sama5d2-pinfunc.h"
-+#include <dt-bindings/mfd/atmel-flexcom.h>
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/pinctrl/at91.h>
-+
-+/ {
-+	model = "Atmel SAMA5D2 PTC EK";
-+	compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
-+
-+	aliases {
-+		serial0 = &uart0;
-+		i2c0	= &i2c0;
-+		i2c1	= &i2c1;
-+		i2c2	= &i2c2;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	memory {
-+		reg = <0x20000000 0x80000>;
-+	};
-+
-+	clocks {
-+		slow_xtal {
-+			clock-frequency = <32768>;
-+		};
-+
-+		main_xtal {
-+			clock-frequency = <24000000>;
-+		};
-+	};
-+
-+	ahb {
-+		usb0: gadget at 00300000 {
-+			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_usba_vbus>;
-+			status = "okay";
-+		};
-+
-+		usb1: ohci at 00400000 {
-+			num-ports = <3>;
-+			atmel,vbus-gpio = <0
-+					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
-+					   0
-+					  >;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_usb_default>;
-+			status = "okay";
-+		};
-+
-+		usb2: ehci at 00500000 {
-+			status = "okay";
-+		};
-+
-+		nand0: nand at 80000000 {
-+			nand-bus-width = <8>;
-+			nand-ecc-mode = "hw";
-+			nand-on-flash-bbt;
-+			atmel,has-pmecc;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_nand_default>;
-+			status = "okay"; /* conflicts with sdmmc1 and qspi0 */
-+
-+			at91bootstrap at 0 {
-+				label = "bootstrap";
-+				reg = <0x0 0x40000>;
-+			};
-+
-+			bootloader at 40000 {
-+				label = "bootloader";
-+				reg = <0x40000 0xc0000>;
-+			};
-+
-+			bootloaderenv at 0x100000 {
-+				label = "bootloader env";
-+				reg = <0x100000 0x40000>;
-+			};
-+
-+			bootloaderenvred at 0x140000 {
-+				label = "bootloader env redundant";
-+				reg = <0x140000 0x40000>;
-+			};
-+
-+			dtb at 180000 {
-+				label = "device tree";
-+				reg = <0x180000 0x80000>;
-+			};
-+
-+			kernel at 200000 {
-+				label = "kernel";
-+				reg = <0x200000 0x600000>;
-+			};
-+
-+			rootfs at 800000 {
-+				label = "rootfs";
-+				reg = <0x800000 0x1f800000>;
-+			};
-+		};
-+
-+		sdmmc0: sdio-host at a0000000 {
-+			bus-width = <8>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
-+			status = "okay";
-+		};
-+
-+		apb {
-+			pmc: pmc at f0014000 {
-+				pmc_fast_restart {
-+					compatible = "atmel,sama5d2-pmc-fast-startup";
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+
-+					atmel,wakeup-rtc-timer;
-+
-+					wkpin: input at 0 {
-+						reg = <0>;
-+					};
-+
-+					gmac_wol: input at 10 {
-+						reg = <10>;
-+						atmel,wakeup-active-high;
-+					};
-+				};
-+			};
-+
-+			spi0: spi at f8000000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_spi0_default>;
-+				status = "okay";
-+
-+				/*
-+				m25p80 at 0 {
-+					compatible = "atmel,at25df321a";
-+					reg = <0>;
-+					spi-max-frequency = <50000000>;
-+				};
-+				*/
-+			};
-+
-+			macb0: ethernet at f8008000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
-+				phy-mode = "rmii";
-+				status = "okay";
-+
-+				ethernet-phy at 1 {
-+					reg = <0x1>;
-+					interrupt-parent = <&pioA>;
-+					interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
-+				};
-+			};
-+
-+			uart0: serial at f801c000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_uart0_default>;
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "okay";
-+			};
-+
-+			uart2: serial at f8024000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_uart2_default>;
-+				atmel,use-dma-rx;
-+				atmel,use-dma-tx;
-+				status = "okay";
-+			};
-+
-+			i2c0: i2c at f8028000 {
-+				dmas = <0>, <0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_i2c0_default>;
-+				i2c-sda-hold-time-ns = <350>;
-+				status = "okay";
-+			};
-+
-+			flx0: flexcom at f8034000 {
-+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-+				status = "okay";
-+
-+				i2c2: i2c at 600 {
-+					compatible = "atmel,sama5d2-i2c";
-+					reg = <0x600 0x200>;
-+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-+					dmas = <0>, <0>;
-+					dma-names = "tx", "rx";
-+					#address-cells = <1>;
-+					#size-cells = <0>;
-+					clocks = <&flx0_clk>;
-+					pinctrl-names = "default";
-+					pinctrl-0 = <&pinctrl_flx0_default>;
-+					atmel,fifo-size = <16>;
-+					status = "okay";
-+				};
-+			};
-+
-+			shdwc at f8048010 {
-+				atmel,shdwc-debouncer = <976>;
-+
-+				input at 0 {
-+					reg = <0>;
-+					atmel,wakeup-type = "low";
-+				};
-+			};
-+
-+			watchdog at f8048040 {
-+				status = "okay";
-+			};
-+
-+			spi1: spi at fc000000 {
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_spi1_default>;
-+				status = "okay";
-+			};
-+
-+			i2c1: i2c at fc028000 {
-+				dmas = <0>, <0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&pinctrl_i2c1_default>;
-+				status = "okay";
-+
-+				at24 at 50 {
-+					compatible = "24c02";
-+					reg = <0x50>;
-+					pagesize = <8>;
-+				};
-+			};
-+
-+			pinctrl at fc038000 {
-+				pinctrl_flx0_default: flx0_default {
-+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
-+						 <PIN_PB29__FLEXCOM0_IO1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_i2c0_default: i2c0_default {
-+					pinmux = <PIN_PD21__TWD0>,
-+						 <PIN_PD22__TWCK0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_i2c1_default: i2c1_default {
-+					pinmux = <PIN_PC6__TWD1>,
-+						 <PIN_PC7__TWCK1>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_key_gpio_default: key_gpio_default {
-+					pinmux = <PIN_PA10__GPIO>;
-+					bias-pull-up;
-+				};
-+
-+				pinctrl_led_gpio_default: led_gpio_default {
-+					pinmux = <PIN_PB6__GPIO>,
-+						 <PIN_PB8__GPIO>,
-+						 <PIN_PB10__GPIO>;
-+					bias-pull-up;
-+				};
-+
-+				pinctrl_macb0_default: macb0_default {
-+					pinmux = <PIN_PB14__GTXCK>,
-+						 <PIN_PB15__GTXEN>,
-+						 <PIN_PB16__GRXDV>,
-+						 <PIN_PB17__GRXER>,
-+						 <PIN_PB18__GRX0>,
-+						 <PIN_PB19__GRX1>,
-+						 <PIN_PB20__GTX0>,
-+						 <PIN_PB21__GTX1>,
-+						 <PIN_PB22__GMDC>,
-+						 <PIN_PB23__GMDIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_macb0_phy_irq: macb0_phy_irq {
-+					pinmux = <PIN_PB24__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_nand_default: nand_default {
-+					re_we_data {
-+						pinmux = <PIN_PA22__D0>,
-+							 <PIN_PA23__D1>,
-+							 <PIN_PA24__D2>,
-+							 <PIN_PA25__D3>,
-+							 <PIN_PA26__D4>,
-+							 <PIN_PA27__D5>,
-+							 <PIN_PA28__D6>,
-+							 <PIN_PA29__D7>,
-+							 <PIN_PA30__NWE_NANDWE>,
-+							 <PIN_PB2__NRD_NANDOE>;
-+						bias-pull-up;
-+						drive-strength = <ATMEL_PIO_DRVSTR_ME>;
-+					};
-+
-+					ale_cle_rdy_cs {
-+						pinmux = <PIN_PB0__A21_NANDALE>,
-+							 <PIN_PB1__A22_NANDCLE>,
-+							 <PIN_PC8__NANDRDY>,
-+							 <PIN_PA31__NCS3>;
-+						bias-pull-up;
-+					};
-+				};
-+
-+				pinctrl_sdmmc0_default: sdmmc0_default {
-+					cmd_data {
-+						pinmux = <PIN_PA1__SDMMC0_CMD>,
-+							 <PIN_PA2__SDMMC0_DAT0>,
-+							 <PIN_PA3__SDMMC0_DAT1>,
-+							 <PIN_PA4__SDMMC0_DAT2>,
-+							 <PIN_PA5__SDMMC0_DAT3>,
-+							 <PIN_PA6__SDMMC0_DAT4>,
-+							 <PIN_PA7__SDMMC0_DAT5>,
-+							 <PIN_PA8__SDMMC0_DAT6>,
-+							 <PIN_PA9__SDMMC0_DAT7>;
-+						bias-pull-up;
-+					};
-+
-+					ck_cd_vddsel {
-+						pinmux = <PIN_PA0__SDMMC0_CK>,
-+							 <PIN_PA11__SDMMC0_VDDSEL>,
-+							 <PIN_PA13__SDMMC0_CD>;
-+						bias-disable;
-+					};
-+				};
-+
-+				pinctrl_spi0_default: spi0_default {
-+					pinmux = <PIN_PA14__SPI0_SPCK>,
-+						 <PIN_PA15__SPI0_MOSI>,
-+						 <PIN_PA16__SPI0_MISO>,
-+						 <PIN_PA17__SPI0_NPCS0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_spi1_default: spi1_default {
-+					pinmux = <PIN_PC1__SPI1_SPCK>,
-+						 <PIN_PC2__SPI1_MOSI>,
-+						 <PIN_PC3__SPI1_MISO>,
-+						 <PIN_PC4__SPI1_NPCS0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_uart0_default: uart0_default {
-+					pinmux = <PIN_PB26__URXD0>,
-+						 <PIN_PB27__UTXD0>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_uart2_default: uart2_default {
-+					pinmux = <PIN_PD23__URXD2>,
-+						 <PIN_PD24__UTXD2>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_usb_default: usb_default {
-+					pinmux = <PIN_PB12__GPIO>;
-+					bias-disable;
-+				};
-+
-+				pinctrl_usba_vbus: usba_vbus {
-+					pinmux = <PIN_PB11__GPIO>;
-+					bias-disable;
-+				};
-+
-+			};
-+
-+			ptc at fc060000 {
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_key_gpio_default>;
-+
-+		bp1 {
-+			label = "PB_USER";
-+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
-+			linux,code = <0x104>;
-+			wakeup-source;
-+		};
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pinctrl_led_gpio_default>;
-+		status = "okay";
-+
-+		red {
-+			label = "red";
-+			gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		green {
-+			label = "green";
-+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		blue {
-+			label = "blue";
-+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "heartbeat";
-+		};
-+	};
-+};
diff --git a/target/linux/generic/config-4.14 b/target/linux/generic/config-4.14
index 9680c4c..f24630a 100644
--- a/target/linux/generic/config-4.14
+++ b/target/linux/generic/config-4.14
@@ -902,6 +902,8 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_DES is not set
 # CONFIG_CRYPTO_DEV_ATMEL_AES is not set
+# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set
+# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
 # CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
 # CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
 # CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
diff --git a/target/linux/generic/config-4.19 b/target/linux/generic/config-4.19
index aa94466..a2d7988 100644
--- a/target/linux/generic/config-4.19
+++ b/target/linux/generic/config-4.19
@@ -946,6 +946,8 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_DES is not set
 # CONFIG_CRYPTO_DEV_ATMEL_AES is not set
+# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set
+# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
 # CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
 # CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
 # CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
-- 
2.7.4




More information about the openwrt-devel mailing list