[OpenWrt-Devel] [PATCH 3/3] gemini: Fix MAC address assignment for DIR-685

Linus Walleij linus.walleij at linaro.org
Fri May 24 14:27:19 PDT 2019


The DIR-685 has the MAC addresses in the RedBoot code just like
DNS-313. Check some magic numbers to determine that the MAC
address is where we want it and extract it from RedBoot.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 .../lib/preinit/05_set_ether_mac_gemini           | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/target/linux/gemini/base-files/lib/preinit/05_set_ether_mac_gemini b/target/linux/gemini/base-files/lib/preinit/05_set_ether_mac_gemini
index 6072e828c678..ecf4a8238143 100644
--- a/target/linux/gemini/base-files/lib/preinit/05_set_ether_mac_gemini
+++ b/target/linux/gemini/base-files/lib/preinit/05_set_ether_mac_gemini
@@ -18,6 +18,21 @@ set_ether_mac() {
 			fi
 		fi
 		;;
+	dlink,dir-685)
+		# The DIR-685 has a special field in its RedBoot
+		# binary that we need to check
+		CONFIG_PARTITION="$(grep "RedBoot" /proc/mtd | cut -d: -f1)"
+		if [ ! -z $CONFIG_PARTITION ] ; then
+			DEVID="$(dd if=/dev/mtdblock0 bs=1 skip=81516 count=7 2>/dev/null)"
+			if [ "x$DEVID" = "xILI9322" ] ; then
+				MAC1="$(dd if=/dev/mtdblock0 bs=1 skip=95040 count=6 2>/dev/null | hexdump -n6 -v -e '/1 ":%02X"' | sed s/^://g)"
+				MAC2="$(dd if=/dev/mtdblock0 bs=1 skip=95046 count=6 2>/dev/null | hexdump -n6 -v -e '/1 ":%02X"' | sed s/^://g)"
+				ifconfig eth0 hw ether $MAC1 2>/dev/null
+				ifconfig eth1 hw ether $MAC2 2>/dev/null
+				return 0
+			fi
+		fi
+		;;
 	esac
 
 	# Most devices have a standard "VCTL" partition
-- 
2.20.1




More information about the openwrt-devel mailing list