[OpenWrt-Devel] Build system puzzles: PCI_SUPPORT not being set for subtarget
lede at allycomm.com
Thu May 9 13:18:59 PDT 2019
On 5/9/19 7:28 PM, Tomasz Maciej Nowak wrote:
> Hi Jeff,
> W dniu 09.05.2019 o 18:25, Jeff Kletsky pisze:
>> On 5/9/19 12:04 PM, Petr Štetiar wrote:
>>> Jeff Kletsky <lede at allycomm.com> [2019-05-09 11:23:18]:
>>>> I reconfirmed that
>>>> openwrt/target/linux/ath79$ cp generic/config-default nand/config-default
>>>> openwrt$ cat /dev/null > .config
>>>> openwrt$ make menuconfig
>>>> has the same behavior -- the nand target does not set PCI_SUPPORT
>>> it works here(tm):
>>> -- ynezz
>> What I'm seeing is that ath10k gets stripped out for nand,
>> but not for nor. I ran "virgin" tests with the scripts below,
>> with the same config-default in both generic/ and nand/.
> I did run Your script for nand and this is the output (removed feeds to speed-up):
> [tomek at vaio-vpcz1 openwrt]$ ./test.sh
> Cloning into 'openwrt-nand-test'...
> # CONFIG_PACKAGE_ath10k-firmware-qca99x0-ct is not set
> # CONFIG_PACKAGE_ath10k-firmware-qca99x0-ct-htt is not set
> # CONFIG_PACKAGE_kmod-ath10k is not set
> So it appears to work.
> When adding changes to target/subtarget config sometimes It's necessary to remove
> $(TOPDIR)/tmp to see changes, maybe that's the issue You were hitting?
Removing $(TOPDIR)/tmp did resolve the issue, thanks!
Still somewhat puzzling, but enough to let me proceed here
and come back to see if I can improve the dependencies another day.
The time of all involved is greatly appreciated.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the openwrt-devel