[OpenWrt-Devel] [PATCH v2] lantiq: image: build initramfs only for FRITZ7362SL

Petr Štetiar ynezz at true.cz
Thu May 9 01:37:47 PDT 2019


Stijn Segers <foss at volatilesystems.org> [2019-05-08 20:38:09]:

Hi,

> Op maandag 6 mei 2019 om 12:13 schreef Petr Štetiar <ynezz at true.cz>:
> > Commit "lantiq/xrx200: enable initramfs images" enabled creation of
> > initramfs images for all devices in lantiq's xrx200 subtarget, just
> > because FRITZ7362SL needs initramfs during OpenWrt instalation.
> > 
> > Then David Bauer informed me, that FRITZ!Box 7412 also needs an
> > initramfs
> > for initial installation [1], so I've added this device into this patch
> > as
> > well.
> > 
> > So this commit changes lantiq to selective-ramdisk feature and adds
> > NEEDS_INITRAMFS=1 to FRITZ7362SL and FRITZ!Box 7412 devices only.
> 
> I think this is a nice solution to what up till now was a probably overly
> broad approach. I'm probably not familiar enough
> with the whole buildroot, but would the other targets with the ramdisk
> feature not need similar scrutiny?

very likely yes, but it would be pretty tedious work to find devices which
would need NEEDS_INITRAMFS=1 and switch those targets to selective-ramdisk
instead.

> A quick grep from master:
> 
> $ git grep FEATURES target/linux/|grep ramdisk
> target/linux/apm821xx/nand/target.mk:FEATURES += nand pcie ramdisk squashfs usb
> target/linux/apm821xx/sata/target.mk:FEATURES += ext4 usb ramdisk squashfs rootfs-part boot-part
> target/linux/ar71xx/mikrotik/target.mk:FEATURES += squashfs ramdisk minor nand
> target/linux/arc770/generic/target.mk:FEATURES += ramdisk usb ext4
> target/linux/archs38/generic/target.mk:FEATURES += ext4 usb ramdisk
> target/linux/armvirt/Makefile:FEATURES+=cpiogz ext4 ramdisk squashfs targz
> target/linux/ath79/Makefile:FEATURES:=ramdisk
> target/linux/ipq40xx/Makefile:FEATURES:=squashfs fpu ramdisk nand
> target/linux/ipq806x/Makefile:FEATURES:=squashfs nand fpu ramdisk
> target/linux/kirkwood/Makefile:FEATURES:=usb nand squashfs ramdisk
> target/linux/lantiq/xrx200/target.mk:FEATURES:=squashfs atm nand ramdisk
> target/linux/lantiq/xway/target.mk:FEATURES:=squashfs atm nand ramdisk
> target/linux/lantiq/xway_legacy/target.mk:FEATURES:=squashfs atm ramdisk small_flash
> target/linux/malta/Makefile:FEATURES:=ramdisk
> target/linux/mediatek/Makefile:FEATURES:=squashfs nand ramdisk fpu
> target/linux/mpc85xx/Makefile:FEATURES:=squashfs ramdisk
> target/linux/mvebu/Makefile:FEATURES:=fpu usb pci pcie gpio nand squashfs ramdisk boot-part rootfs-part
> target/linux/octeon/Makefile:FEATURES:=squashfs ramdisk pci usb
> target/linux/oxnas/Makefile:FEATURES:=gpio ramdisk rtc squashfs
> target/linux/ramips/mt7621/target.mk:FEATURES+=nand ramdisk rtc usb minor
> target/linux/ramips/rt305x/target.mk:FEATURES+=usb ramdisk small_flash

which makes me wonder if this selective-ramdisk patch is really worth the
effort, maybe we should just really enable ramdisk feature when the initramfs
is needed for any device under that target and just live with that fact.

-- ynezz



More information about the openwrt-devel mailing list