[OpenWrt-Devel] qca8k: ipqess: ipq40xx: Kernel Panic on Adding VLAN Sub-Interface to Bridge

Christian Lamparter chunkeey at gmail.com
Tue Mar 19 11:14:30 PDT 2019


Cc: Florian. I hope you don't mind.

On Tuesday, March 19, 2019 5:50:01 PM CET Jeff Kletsky wrote:
> Working with 4.19 / qca8k / ipqess patches from staging/chunkeey[1]
> on an IPQ4019-based device, I can get basic connectivity either manually,
> or with a "standard" UCI definition of the "lan" bridge[2].
> 
> (I'm aware that this is not "production" code and expect "challenges".)
> 
> However, I'm puzzled as how to manage VLANs and tagging, even using
> `ip` and `bridge` (iproute2, from ip-bridge and ip-full packages).
> 
> It appears that the qca8k driver doesn't support `bridge` VLAN-related
> commands. Checking the source doesn't show implementation of the
> `port_vlan_*` functions described in the Linux DSA doc[3].
> 
>
> Setting aside my suspicion that a port-based VLAN approach seems
> unlikely to be able to handle trunking of VLANs, I tried adding a
> sub-interface of one of the otherwise unused phy interfaces (renamed
> in my DTS as "wan0" to not conflict with the OpenWrt OS usage of "wan").

At first glance, I think you are running into what's described in section
"Design limitations" of DSA in [3]:"
- inability to configure specific VLAN IDs / trunking VLANs between switches
  when using a cascaded setup". (Sadly there isn't a link to a possible
patch or discussion so I don't know the state of it).

However...
 
> This unfortunately results in a kernel panic when trying to add to the
> bridge.
> 
> Bridge br-lan initially set up with "default" UCI config[2]
> 
> Full serial log available[4]
> 
>    ip link add link wan0 name wan0.100 type vlan id 100
>    ip link set wan0 up
>    ip link set wan0.100 up
>    ip link set wan0.100 master br-lan
>    (kernel panics)
> 
> 
> I've traced this to passing of a null pointer to br_vlan_enabled()
> with the diagnostic patch shown in [5]

Yes, this shouldn't crash. I think Florian has already a patch for this
upstream [6].

commit 061f6a505ac33659eab007731c0f6374df39ab55
Author: Florian Fainelli <f.fainelli at gmail.com>
Date:   Wed Feb 20 14:35:39 2019 -0800

    net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation

That should help with the NPEs since it now checks whenever the
bridge_dev is valid or not.
 
[3] https://www.kernel.org/doc/Documentation/networking/dsa/dsa.txt
[6] <https://patchwork.ozlabs.org/patch/1026172/>





More information about the openwrt-devel mailing list