[OpenWrt-Devel] [PATCH] ar71xx: add support for GL.iNet GL-X1200
Guilin.Wang
guilin.wang at gl-inet.com
Thu Apr 11 05:18:12 EDT 2019
Thanks for your suggestion.
Since the customer is waiting for urgent use, I want to submit it to ar71xx first, and I will submit it to ath79 later.
------------------ Original ------------------
From: "Kevin 'ldir' Darbyshire-Bryant"<ldir at darbyshire-bryant.me.uk>;
Date: Thu, Apr 11, 2019 05:05 PM
To: "wellnw"<guilin.wang at gl-inet.com>;
Cc: "openwrt-devel at lists.openwrt.org"<openwrt-devel at lists.openwrt.org>;
Subject: Re: [OpenWrt-Devel] [PATCH] ar71xx: add support for GL.iNet GL-X1200
> On 11 Apr 2019, at 08:53, wellnw <guilin.wang at gl-inet.com> wrote:
>
> This patch adds supports for GL-X1200.
>
> Specification:
> - SOC: QCA9563 (775MHz)
> - Flash: 16 MiB (W25Q128FVSG)
> - RAM: 128 MiB DDR2
> - Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN
> - Wireless: QCA9563(2.4GHz) and QCA9886(5GHz)
> - SIM: 2x SIM card slots
> - MicroSD: 1x microSD slot
> - Antenna: 2x external 5dBi antennas
> - USB: 1x USB 2.0 port
> - Button: 1x reset button
> - LED: 16x LEDs (3x GPIO controllable)
> - UART: 1x UART on PCB (JP1: 3.3V, RX, TX, GND)
>
> Signed-off-by: wellnw <guilin.wang at gl-inet.com>
> ---
> target/linux/ar71xx/base-files/etc/board.d/01_leds | 4 +
> .../linux/ar71xx/base-files/etc/board.d/02_network | 4 +
> .../etc/hotplug.d/firmware/11-ath10k-caldata | 5 +
> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
> .../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ar71xx/config-4.14 | 1 +
> .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 ++
> target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
> .../ar71xx/files/arch/mips/ath79/mach-gl-x1200.c | 173 +++++++++++++++++++++
> .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
> target/linux/ar71xx/generic/config-default | 1 +
> target/linux/ar71xx/image/generic.mk | 13 ++
> 12 files changed, 218 insertions(+)
> create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-gl-x1200.c
>
> diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> index 41dd8c5..eb455ce 100755
> --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> @@ -448,6 +448,10 @@ gl-inet)
> ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
> ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
> ;;
> +gl-x1200)
> + ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
> + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
> + ;;
> hiwifi-hc6361)
> ucidef_set_led_netdev "inet" "INET" "hiwifi:blue:internet" "eth1"
> ucidef_set_led_wlan "wlan" "WLAN" "hiwifi:blue:wlan-2p4" "phy0tpt"
> diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
> index 68874e0..6fd4c25 100755
> --- a/target/linux/ar71xx/base-files/etc/board.d/02_network
> +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
> @@ -456,6 +456,10 @@ ar71xx_setup_interfaces()
> ucidef_add_switch "switch0" \
> "0 at eth0" "2:lan:2" "3:lan:1" "1:wan"
> ;;
> + gl-x1200)
> + ucidef_add_switch "switch0" \
> + "0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
> + ;;
> jwap230)
> ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
> ucidef_add_switch "switch0" \
> diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> index 2ded261..fd6f213 100644
> --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> @@ -187,6 +187,11 @@ case "$FIRMWARE" in
> cf-e385ac)
> ath10kcal_extract "art" 20480 12064
> ;;
> + gl-x1200)
> + ath10kcal_extract "art" 20480 12064
> + ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
> + /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
> + ;;
> esac
> ;;
> *)
> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> index 990683a..42902d0 100755
> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> @@ -794,6 +794,9 @@ ar71xx_board_detect() {
> *"GL-USB150")
> name="gl-usb150"
> ;;
> + *"GL-X1200")
> + name="gl-x1200"
> + ;;
> *"HiveAP-121")
> name="hiveap-121"
> ;;
> diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> index 8173501..55be0a3 100755
> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> @@ -273,6 +273,7 @@ platform_check_image() {
> gl-domino|\
> gl-mifi|\
> gl-usb150|\
> + gl-x1200|\
> hiwifi-hc6361|\
> hornet-ub-x2|\
> jwap230|\
> diff --git a/target/linux/ar71xx/config-4.14 b/target/linux/ar71xx/config-4.14
> index 9a524fa..8f8d8ce 100644
> --- a/target/linux/ar71xx/config-4.14
> +++ b/target/linux/ar71xx/config-4.14
> @@ -130,6 +130,7 @@ CONFIG_ATH79=y
> # CONFIG_ATH79_MACH_GL_INET is not set
> # CONFIG_ATH79_MACH_GL_MIFI is not set
> # CONFIG_ATH79_MACH_GL_USB150 is not set
> +# CONFIG_ATH79_MACH_GL_X1200 is not set
> # CONFIG_ATH79_MACH_GS_MINIBOX_V32 is not set
> # CONFIG_ATH79_MACH_GS_OOLITE_V1 is not set
> # CONFIG_ATH79_MACH_GS_OOLITE_V5_2 is not set
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> index 6fd78c4..c42fa16 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> @@ -897,6 +897,17 @@ config ATH79_MACH_GL_USB150
> select ATH79_DEV_M25P80
> select ATH79_DEV_WMAC
>
> +config ATH79_MACH_GL_X1200
> + bool "GL.iNet GL-X1200 support"
> + select SOC_QCA956X
> + select ATH79_DEV_AP9X_PCI if PCI
> + select ATH79_DEV_ETH
> + select ATH79_DEV_GPIO_BUTTONS
> + select ATH79_DEV_LEDS_GPIO
> + select ATH79_DEV_M25P80
> + select ATH79_DEV_USB
> + select ATH79_DEV_WMAC
> +
> config ATH79_MACH_EAP120
> bool "TP-LINK EAP120 support"
> select SOC_AR934X
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> index 0265b3d..9816175 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> @@ -140,6 +140,7 @@ obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o
> obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
> obj-$(CONFIG_ATH79_MACH_GL_MIFI) += mach-gl-mifi.o
> obj-$(CONFIG_ATH79_MACH_GL_USB150) += mach-gl-usb150.o
> +obj-$(CONFIG_ATH79_MACH_GL_X1200) += mach-gl-x1200.o
> obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V32) += mach-gs-minibox-v32.o
> obj-$(CONFIG_ATH79_MACH_GS_OOLITE_V1) += mach-gs-oolite-v1.o
> obj-$(CONFIG_ATH79_MACH_GS_OOLITE_V5_2) += mach-gs-oolite-v5-2.o
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-x1200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-x1200.c
> new file mode 100644
> index 0000000..0037cd9
> --- /dev/null
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-x1200.c
> @@ -0,0 +1,173 @@
> +/*
> + * GL.iNet GL-X1200 board support
> + *
> + * Copyright (C) 2018 guilin wang <guilin.wang at gl-inet.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +#include <linux/init.h>
> +#include <linux/gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/ath9k_platform.h>
> +#include <linux/ar8216_platform.h>
> +#include <linux/etherdevice.h>
> +
> +#include <asm/mach-ath79/ath79.h>
> +#include <asm/mach-ath79/irq.h>
> +#include <asm/mach-ath79/ar71xx_regs.h>
> +
> +#include <linux/platform_data/phy-at803x.h>
> +
> +#include "common.h"
> +#include "dev-ap9x-pci.h"
> +#include "dev-eth.h"
> +#include "dev-gpio-buttons.h"
> +#include "dev-leds-gpio.h"
> +#include "dev-spi.h"
> +#include "dev-m25p80.h"
> +#include "dev-wmac.h"
> +#include "dev-usb.h"
> +#include "machtypes.h"
> +#include "pci.h"
> +
> +#define GL_X1200_KEYS_POLL_INTERVAL 20
> +#define GL_X1200_KEYS_DEBOUNCE_INTERVAL (3 * GL_X1200_KEYS_POLL_INTERVAL)
> +
> +#define GL_X1200_GPIO_EXT_WDT 16
> +#define GL_X1200_GPIO_LED_WLAN2G 19
> +#define GL_X1200_GPIO_LED_WLAN5G 20
> +#define GL_X1200_GPIO_LED_POWER 8
> +#define GL_X1200_GPIO_USB_POWER 7
> +
> +#define GL_X1200_GPIO_BTN_RESET 2
> +
> +#define GL_X1200_MAC0_OFFSET 0x0000
> +#define GL_X1200_WMAC_CALDATA_OFFSET 0x1000
> +#define GL_X1200_PCI_CALDATA_OFFSET 0x5000
> +
> +static void __init gl_x1200_ext_watchdog_setup(int gpio_wdt)
> +{
> + int state = 0;
> + int i = 0;
> + if (gpio_wdt) {
> + gpio_request_one(gpio_wdt, GPIOF_OUT_INIT_HIGH,
> + "gl-x1200:watchdog");
> + //disable watchdog
> + for(i = 0; i < 20; i++) {
> + state = !state;
> + gpio_set_value(gpio_wdt, state);
> + msleep(10);
> + }
> + }
> +}
> +
> +
> +static struct spi_board_info gl_x1200_spi_info[] = {
> + {
> + .bus_num = 0,
> + .chip_select = 0,
> + .max_speed_hz = 25000000,
> + .modalias = "m25p80",
> + .platform_data = NULL,
> + },
> +};
> +
> +static struct ath79_spi_platform_data gl_x1200_spi_data = {
> + .bus_num = 0,
> + .num_chipselect = 1,
> +};
> +
> +static struct gpio_led gl_x1200_leds_gpio[] __initdata = {
> + {
> + .name = "gl-x1200:green:power",
> + .gpio = GL_X1200_GPIO_LED_POWER,
> + .default_state = LEDS_GPIO_DEFSTATE_KEEP,
> + .active_low = 1,
> + },{
> + .name = "gl-x1200:green:usbpower",
> + .gpio = GL_X1200_GPIO_USB_POWER,
> + .active_low = 1,
> + },{
> + .name = "gl-x1200:green:wlan2g",
> + .gpio = GL_X1200_GPIO_LED_WLAN2G,
> + .active_low = 1,
> + },{
> + .name = "gl-x1200:green:wlan5g",
> + .gpio = GL_X1200_GPIO_LED_WLAN5G,
> + .active_low = 0,
> + }
> +};
> +
> +static struct gpio_keys_button gl_x1200_gpio_keys[] __initdata = {
> + {
> + .desc = "reset",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = GL_X1200_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = GL_X1200_GPIO_BTN_RESET,
> + .active_low = 1,
> + },
> +};
> +
> +static struct ar8327_pad_cfg gl_x1200_ar8327_pad0_cfg = {
> + .mode = AR8327_PAD_MAC_SGMII,
> + .sgmii_delay_en = true,
> +};
> +
> +static struct ar8327_platform_data gl_x1200_ar8327_data = {
> + .pad0_cfg = &gl_x1200_ar8327_pad0_cfg,
> + .port0_cfg = {
> + .force_link = 1,
> + .speed = AR8327_PORT_SPEED_1000,
> + .duplex = 1,
> + .txpause = 1,
> + .rxpause = 1,
> + },
> +};
> +
> +
> +static struct mdio_board_info gl_x1200_mdio0_info[] = {
> + {
> + .bus_id = "ag71xx-mdio.0",
> + .mdio_addr = 0,
> + .platform_data = &gl_x1200_ar8327_data,
> + },
> +};
> +
> +static void __init gl_x1200_setup(void)
> +{
> + u8 *eeprom = (u8 *) KSEG1ADDR(0x1f050000);
> +
> + ath79_register_spi(&gl_x1200_spi_data, gl_x1200_spi_info, 1);
> +
> + ath79_init_mac(ath79_eth0_data.mac_addr,
> + eeprom + GL_X1200_MAC0_OFFSET, 0);
> +
> + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
> + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
> + ath79_eth0_data.phy_mask = BIT(0);
> +
> + mdiobus_register_board_info(gl_x1200_mdio0_info,
> + ARRAY_SIZE(gl_x1200_mdio0_info));
> + ath79_register_mdio(0, 0x00);
> + ath79_register_eth(0);
> + ath79_register_usb();
> +
> + ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
> +
> + ath79_register_wmac(eeprom + GL_X1200_WMAC_CALDATA_OFFSET, NULL);
> + ap91_pci_init(eeprom + GL_X1200_PCI_CALDATA_OFFSET, NULL);
> +
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_x1200_leds_gpio),
> + gl_x1200_leds_gpio);
> +
> + ath79_register_gpio_keys_polled(-1, GL_X1200_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(gl_x1200_gpio_keys),
> + gl_x1200_gpio_keys);
> + gl_x1200_ext_watchdog_setup(GL_X1200_GPIO_EXT_WDT);
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_GL_X1200, "GL-X1200", "GL-X1200",
> + gl_x1200_setup);
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> index 9722744..f5c3e3d 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> @@ -138,6 +138,7 @@ enum ath79_mach_type {
> ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
> ATH79_MACH_GL_MIFI, /* GL-MIFI support */
> ATH79_MACH_GL_USB150, /* GL.iNet GL-USB150 */
> + ATH79_MACH_GL_X1200, /* GL.iNet GL-X1200 */
> ATH79_MACH_GS_MINIBOX_V1, /* GainStrong MiniBox V1.0 */
> ATH79_MACH_GS_MINIBOX_V32, /* Gainstrong MiniBox V3.2 */
> ATH79_MACH_GS_OOLITE_V1, /* GainStrong Oolite V1.0 */
> diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default
> index 25b58ae..de7586f 100644
> --- a/target/linux/ar71xx/generic/config-default
> +++ b/target/linux/ar71xx/generic/config-default
> @@ -99,6 +99,7 @@ CONFIG_ATH79_MACH_GL_DOMINO=y
> CONFIG_ATH79_MACH_GL_INET=y
> CONFIG_ATH79_MACH_GL_MIFI=y
> CONFIG_ATH79_MACH_GL_USB150=y
> +CONFIG_ATH79_MACH_GL_X1200=y
> CONFIG_ATH79_MACH_GS_MINIBOX_V32=y
> CONFIG_ATH79_MACH_GS_OOLITE_V1=y
> CONFIG_ATH79_MACH_GS_OOLITE_V5_2=y
> diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
> index 30a8b34..2018333 100644
> --- a/target/linux/ar71xx/image/generic.mk
> +++ b/target/linux/ar71xx/image/generic.mk
> @@ -543,6 +543,19 @@ define Device/gl-usb150
> endef
> TARGET_DEVICES += gl-usb150
>
> +define Device/gl-x1200
> + DEVICE_TITLE := GL.iNet GL-X1200
> + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage \
> + kmod-ath10k ath10k-firmware-qca9888
> + BOARDNAME := GL-X1200
> + SUPPORTED_DEVICES := gl-x1200
> + IMAGE_SIZE := 16000k
> + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
> + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
> + append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
> +endef
> +TARGET_DEVICES += gl-x1200
> +
> define Device/lan-turtle
> $(Device/tplink-16mlzma)
> DEVICE_TITLE := Hak5 LAN Turtle
> --
> 2.7.4
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Thanks for your patch.
Have you considered adding this device to the ath79 target instead? ar71xx will be going away at some point. ath79 is the future^w now.
Cheers,
Kevin D-B
gpg: 012C ACB2 28C6 C53E 9775 9123 B3A2 389B 9DE2 334A
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list