[OpenWrt-Devel] [PATCH] ar71xx: add support for GL.iNet GL-X1200

wellnw guilin.wang at gl-inet.com
Wed Apr 10 22:08:33 EDT 2019


This patch adds supports for GL-X1200.

Specification:
    - SOC: QCA9563 (775MHz)
    - Flash: 16 MiB (W25Q128FVSG)
    - RAM: 128 MiB DDR2
    - Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN
    - Wireless: QCA9563(2.4GHz) and QCA9886(5GHz)
    - SIM: 2x SIM card slots
    - MicroSD: 1x microSD slot
    - Antenna: 2x external 5dBi antennas
    - USB: 1x USB 2.0 port
    - Button: 1x reset button
    - LED: 16x LEDs (3x GPIO controllable)
    - UART: 1x UART on PCB (JP1: 3.3V, RX, TX, GND)

Signed-off-by: wellnw <guilin.wang at gl-inet.com>
---
 target/linux/ar71xx/base-files/etc/board.d/01_leds |   4 +
 .../linux/ar71xx/base-files/etc/board.d/02_network |   4 +
 .../etc/hotplug.d/firmware/11-ath10k-caldata       |   5 +
 target/linux/ar71xx/base-files/lib/ar71xx.sh       |   3 +
 .../ar71xx/base-files/lib/upgrade/platform.sh      |   1 +
 target/linux/ar71xx/config-4.14                    |   1 +
 .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt   |  11 ++
 target/linux/ar71xx/files/arch/mips/ath79/Makefile |   1 +
 .../ar71xx/files/arch/mips/ath79/mach-gl-x1200.c   | 153 +++++++++++++++++++++
 .../linux/ar71xx/files/arch/mips/ath79/machtypes.h |   1 +
 target/linux/ar71xx/generic/config-default         |   1 +
 target/linux/ar71xx/image/generic.mk               |  13 ++
 12 files changed, 198 insertions(+)
 create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-gl-x1200.c

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 41dd8c5..eb455ce 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -448,6 +448,10 @@ gl-inet)
 	ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
 	ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
 	;;
+gl-x1200)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
+	;;
 hiwifi-hc6361)
 	ucidef_set_led_netdev "inet" "INET" "hiwifi:blue:internet" "eth1"
 	ucidef_set_led_wlan "wlan" "WLAN" "hiwifi:blue:wlan-2p4" "phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 68874e0..6fd4c25 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -456,6 +456,10 @@ ar71xx_setup_interfaces()
 		ucidef_add_switch "switch0" \
  			"0 at eth0" "2:lan:2" "3:lan:1" "1:wan"
 		;;
+	gl-x1200)
+		ucidef_add_switch "switch0" \
+			"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+		;;
 	jwap230)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
 		ucidef_add_switch "switch0" \
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 2ded261..fd6f213 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -187,6 +187,11 @@ case "$FIRMWARE" in
 	cf-e385ac)
 		ath10kcal_extract "art" 20480 12064
 		;;
+	gl-x1200)
+		ath10kcal_extract "art" 20480 12064
+		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+		;;
 	esac
 	;;
 *)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 990683a..42902d0 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -794,6 +794,9 @@ ar71xx_board_detect() {
 	*"GL-USB150")
 		name="gl-usb150"
 		;;
+	*"GL-X1200")
+		name="gl-x1200"
+		;;
 	*"HiveAP-121")
 		name="hiveap-121"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 8173501..55be0a3 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -273,6 +273,7 @@ platform_check_image() {
 	gl-domino|\
 	gl-mifi|\
 	gl-usb150|\
+	gl-x1200|\
 	hiwifi-hc6361|\
 	hornet-ub-x2|\
 	jwap230|\
diff --git a/target/linux/ar71xx/config-4.14 b/target/linux/ar71xx/config-4.14
index 9a524fa..8f8d8ce 100644
--- a/target/linux/ar71xx/config-4.14
+++ b/target/linux/ar71xx/config-4.14
@@ -130,6 +130,7 @@ CONFIG_ATH79=y
 # CONFIG_ATH79_MACH_GL_INET is not set
 # CONFIG_ATH79_MACH_GL_MIFI is not set
 # CONFIG_ATH79_MACH_GL_USB150 is not set
+# CONFIG_ATH79_MACH_GL_X1200 is not set
 # CONFIG_ATH79_MACH_GS_MINIBOX_V32 is not set
 # CONFIG_ATH79_MACH_GS_OOLITE_V1 is not set
 # CONFIG_ATH79_MACH_GS_OOLITE_V5_2 is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 6fd78c4..c42fa16 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -897,6 +897,17 @@ config ATH79_MACH_GL_USB150
 	select ATH79_DEV_M25P80
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_GL_X1200
+	bool "GL.iNet GL-X1200 support"
+	select SOC_QCA956X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_EAP120
 	bool "TP-LINK EAP120 support"
 	select SOC_AR934X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 0265b3d..9816175 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -140,6 +140,7 @@ obj-$(CONFIG_ATH79_MACH_GL_DOMINO)		+= mach-gl-domino.o
 obj-$(CONFIG_ATH79_MACH_GL_INET)		+= mach-gl-inet.o
 obj-$(CONFIG_ATH79_MACH_GL_MIFI)		+= mach-gl-mifi.o
 obj-$(CONFIG_ATH79_MACH_GL_USB150)		+= mach-gl-usb150.o
+obj-$(CONFIG_ATH79_MACH_GL_X1200)		+= mach-gl-x1200.o
 obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V32)		+= mach-gs-minibox-v32.o
 obj-$(CONFIG_ATH79_MACH_GS_OOLITE_V1)		+= mach-gs-oolite-v1.o
 obj-$(CONFIG_ATH79_MACH_GS_OOLITE_V5_2)		+= mach-gs-oolite-v5-2.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-x1200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-x1200.c
new file mode 100644
index 0000000..ab3be3b
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-x1200.c
@@ -0,0 +1,153 @@
+/*
+ * GL.iNet GL-X1200 board support
+ *
+ * Copyright (C) 2018 guilin wang <guilin.wang at gl-inet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <linux/etherdevice.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/irq.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include <linux/platform_data/phy-at803x.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define GL_X1200_KEYS_POLL_INTERVAL	20
+#define GL_X1200_KEYS_DEBOUNCE_INTERVAL	(3 * GL_X1200_KEYS_POLL_INTERVAL)
+
+#define GL_X1200_GPIO_LED_WLAN2G        19
+#define GL_X1200_GPIO_LED_WLAN5G        20
+#define GL_X1200_GPIO_LED_POWER			8
+#define GL_X1200_GPIO_USB_POWER			7
+
+#define GL_X1200_GPIO_BTN_RESET			2
+
+#define GL_X1200_MAC0_OFFSET             0x0000
+#define GL_X1200_WMAC_CALDATA_OFFSET     0x1000
+#define GL_X1200_PCI_CALDATA_OFFSET      0x5000
+
+static struct spi_board_info gl_x1200_spi_info[] = {
+	{
+		.bus_num		= 0,
+		.chip_select    = 0,
+		.max_speed_hz   = 25000000,
+		.modalias		= "m25p80",
+		.platform_data  = NULL,
+	},
+};
+
+static struct ath79_spi_platform_data gl_x1200_spi_data = {
+	.bus_num			= 0,
+	.num_chipselect     = 1,
+};
+
+static struct gpio_led gl_x1200_leds_gpio[] __initdata = {
+	{
+		.name			= "gl-x1200:green:power",
+		.gpio			= GL_X1200_GPIO_LED_POWER,
+		.default_state	= LEDS_GPIO_DEFSTATE_KEEP,
+		.active_low		= 1,
+	},{
+		.name		= "gl-x1200:green:usbpower",
+		.gpio		= GL_X1200_GPIO_USB_POWER,
+		.active_low	= 1,
+	},{
+		.name		= "gl-x1200:green:wlan2g",
+		.gpio		= GL_X1200_GPIO_LED_WLAN2G,
+		.active_low	= 1,
+	},{
+		.name		= "gl-x1200:green:wlan5g",
+		.gpio		= GL_X1200_GPIO_LED_WLAN5G,
+		.active_low	= 0,
+	}
+};
+
+static struct gpio_keys_button gl_x1200_gpio_keys[] __initdata = {
+	{
+		.desc                   = "reset",
+		.type                   = EV_KEY,
+		.code                   = KEY_RESTART,
+		.debounce_interval      = GL_X1200_KEYS_DEBOUNCE_INTERVAL,
+		.gpio                   = GL_X1200_GPIO_BTN_RESET,
+		.active_low             = 1,
+	},
+};
+
+static struct ar8327_pad_cfg gl_x1200_ar8327_pad0_cfg = {
+	.mode = AR8327_PAD_MAC_SGMII,
+	.sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data gl_x1200_ar8327_data = {
+	.pad0_cfg = &gl_x1200_ar8327_pad0_cfg,
+	.port0_cfg = {
+		.force_link = 1,
+		.speed = AR8327_PORT_SPEED_1000,
+		.duplex = 1,
+		.txpause = 1,
+		.rxpause = 1,
+	},
+};
+
+
+static struct mdio_board_info gl_x1200_mdio0_info[] = {
+	{
+		.bus_id = "ag71xx-mdio.0",
+		.mdio_addr = 0,
+		.platform_data = &gl_x1200_ar8327_data,
+	},
+};
+
+static void __init gl_x1200_setup(void)
+{
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1f050000);
+
+	ath79_register_spi(&gl_x1200_spi_data, gl_x1200_spi_info, 1);
+
+	ath79_init_mac(ath79_eth0_data.mac_addr,
+			eeprom + GL_X1200_MAC0_OFFSET, 0);
+
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+	ath79_eth0_data.phy_mask = BIT(0);
+
+	mdiobus_register_board_info(gl_x1200_mdio0_info,
+			ARRAY_SIZE(gl_x1200_mdio0_info));
+	ath79_register_mdio(0, 0x00);
+	ath79_register_eth(0);
+	ath79_register_usb();
+
+	ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
+
+	ath79_register_wmac(eeprom + GL_X1200_WMAC_CALDATA_OFFSET, NULL);
+	ap91_pci_init(eeprom + GL_X1200_PCI_CALDATA_OFFSET, NULL);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_x1200_leds_gpio),
+			gl_x1200_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, GL_X1200_KEYS_POLL_INTERVAL,
+			ARRAY_SIZE(gl_x1200_gpio_keys),
+			gl_x1200_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_GL_X1200, "GL-X1200", "GL-X1200",
+		gl_x1200_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 9722744..f5c3e3d 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -138,6 +138,7 @@ enum ath79_mach_type {
 	ATH79_MACH_GL_INET,			/* GL-CONNECT GL-INET */
 	ATH79_MACH_GL_MIFI,			/* GL-MIFI support */
 	ATH79_MACH_GL_USB150,			/* GL.iNet GL-USB150 */
+	ATH79_MACH_GL_X1200,			/* GL.iNet GL-X1200 */
 	ATH79_MACH_GS_MINIBOX_V1,		/* GainStrong MiniBox V1.0 */
 	ATH79_MACH_GS_MINIBOX_V32,		/* Gainstrong MiniBox V3.2 */
 	ATH79_MACH_GS_OOLITE_V1,		/* GainStrong Oolite V1.0 */
diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default
index 25b58ae..de7586f 100644
--- a/target/linux/ar71xx/generic/config-default
+++ b/target/linux/ar71xx/generic/config-default
@@ -99,6 +99,7 @@ CONFIG_ATH79_MACH_GL_DOMINO=y
 CONFIG_ATH79_MACH_GL_INET=y
 CONFIG_ATH79_MACH_GL_MIFI=y
 CONFIG_ATH79_MACH_GL_USB150=y
+CONFIG_ATH79_MACH_GL_X1200=y
 CONFIG_ATH79_MACH_GS_MINIBOX_V32=y
 CONFIG_ATH79_MACH_GS_OOLITE_V1=y
 CONFIG_ATH79_MACH_GS_OOLITE_V5_2=y
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index 30a8b34..3b16fef 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -543,6 +543,19 @@ define Device/gl-usb150
 endef
 TARGET_DEVICES += gl-usb150
 
+define Device/gl-x1200
+  DEVICE_TITLE := GL.iNet GL-X1200
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage \
+	  kmod-ath10k ath10k-firmware-qca9888 
+  BOARDNAME := GL-X1200
+  SUPPORTED_DEVICES := gl-x1200
+  IMAGE_SIZE := 16000k
+  MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
+  IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+	  append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += gl-x1200
+
 define Device/lan-turtle
   $(Device/tplink-16mlzma)
   DEVICE_TITLE := Hak5 LAN Turtle
-- 
2.7.4





_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list