[OpenWrt-Devel] [PATCH 4/5] base-files: make it possible to specify switch led mode

Christian Lamparter chunkeey at gmail.com
Fri Sep 21 18:38:40 EDT 2018


The swconfig switch led driver has the ability to switch
between a "link, rx and/or tx" mode. However, this feature
was not implemented in uci, the led init script and
config_generate.

This patch adds a seventh parameter to the
ucidef_set_led_switch() function. The accepted values for
this parameter are: link, rx and tx.
Any permutations of these three values are supported, as
long as they are properly encased with quotes.
If the parameter is not specified it will default to "all"
(link rx tx).

Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
---
 package/base-files/files/bin/config_generate           | 5 +++--
 package/base-files/files/etc/init.d/led                | 6 ++++--
 package/base-files/files/lib/functions/uci-defaults.sh | 2 ++
 3 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/package/base-files/files/bin/config_generate b/package/base-files/files/bin/config_generate
index c8b253da5b..df221cc26c 100755
--- a/package/base-files/files/bin/config_generate
+++ b/package/base-files/files/bin/config_generate
@@ -366,11 +366,12 @@ generate_led() {
 		;;
 
 		switch)
-			local port_mask speed_mask
-			json_get_vars port_mask speed_mask
+			local port_mask speed_mask mode
+			json_get_vars port_mask speed_mask mode
 			uci -q batch <<-EOF
 				set system.$cfg.port_mask='$port_mask'
 				set system.$cfg.speed_mask='$speed_mask'
+				set system.$cfg.mode='$mode'
 			EOF
 		;;
 
diff --git a/package/base-files/files/etc/init.d/led b/package/base-files/files/etc/init.d/led
index c790e3e181..a3f1224a1a 100755
--- a/package/base-files/files/etc/init.d/led
+++ b/package/base-files/files/etc/init.d/led
@@ -20,7 +20,7 @@ load_led() {
 	config_get trigger $1 trigger "none"
 	config_get dev $1 dev
 	config_get ports $1 port
-	config_get mode $1 mode "link"
+	config_get mode $1 mode
 	config_get_bool default $1 default "nil"
 	config_get delayon $1 delayon
 	config_get delayoff $1 delayoff
@@ -71,7 +71,7 @@ load_led() {
 		"netdev")
 			[ -n "$dev" ] && {
 				echo $dev > /sys/class/leds/${sysfs}/device_name
-				echo $mode > /sys/class/leds/${sysfs}/mode
+				echo "${mode:-link}" > /sys/class/leds/${sysfs}/mode
 				echo $interval > /sys/class/leds/${sysfs}/interval
 			}
 			;;
@@ -110,6 +110,8 @@ load_led() {
 			config_get speed_mask $1 speed_mask
 			[ -n "$speed_mask" ] && \
 				echo $speed_mask > /sys/class/leds/${sysfs}/speed_mask
+			[ -n "$mode" ] && \
+				echo "$mode" > /sys/class/leds/${sysfs}/mode
 			;;
 		esac
 	}
diff --git a/package/base-files/files/lib/functions/uci-defaults.sh b/package/base-files/files/lib/functions/uci-defaults.sh
index 7fa328ac20..315df7b708 100755
--- a/package/base-files/files/lib/functions/uci-defaults.sh
+++ b/package/base-files/files/lib/functions/uci-defaults.sh
@@ -442,11 +442,13 @@ ucidef_set_led_switch() {
 	local trigger_name="$4"
 	local port_mask="$5"
 	local speed_mask="$6"
+	local mode="$7"
 
 	_ucidef_set_led_common "$1" "$2" "$3"
 
 	json_add_string trigger "$trigger_name"
 	json_add_string type switch
+	json_add_string mode "$mode"
 	json_add_string port_mask "$port_mask"
 	json_add_string speed_mask "$speed_mask"
 	json_select ..
-- 
2.19.0


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list