[OpenWrt-Devel] [PATCH v2] brcm47xx: add switch port mapping to Asus WL-500W

Mirko Parthey mirko.parthey at web.de
Tue May 22 15:23:36 EDT 2018


Switch ports 0..3 are connected to external ports LAN{1..4} in sequence,
switch port 4 is not used, and switch port 5 is connected to the CPU.
The WAN port is attached to the CPU's second network interface; it has no
connection to the internal switch.

Reuse the "Dell TrueMobile 2300" entry, which describes the same mapping.

Signed-off-by: Mirko Parthey <mirko.parthey at web.de>
---
This patch is an update to https://patchwork.ozlabs.org/patch/734831/

Changes since v1:
* resubmit because patch was dropped from patchwork
* update commit message to match similar patches
* rebase on master and test again

 target/linux/brcm47xx/base-files/etc/board.d/01_detect | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/linux/brcm47xx/base-files/etc/board.d/01_detect b/target/linux/brcm47xx/base-files/etc/board.d/01_detect
index 1860407..2373145 100755
--- a/target/linux/brcm47xx/base-files/etc/board.d/01_detect
+++ b/target/linux/brcm47xx/base-files/etc/board.d/01_detect
@@ -139,7 +139,6 @@ detect_by_model() {
 		;;
 
 	"Asus WL500G" | \
-	"Asus WL500W" | \
 	"Microsoft MN-700")
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		;;
@@ -159,6 +158,7 @@ detect_by_model() {
 			"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5 at eth0"
 		;;
 
+	"Asus WL500W" | \
 	"Dell TrueMobile 2300")
 		ucidef_set_interface_wan "eth1"
 		ucidef_add_switch "switch0" \
-- 
2.1.4


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
http://lists.infradead.org/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list