[OpenWrt-Devel] ath79: DSA with qca8k

Robert Marko robimarko at gmail.com
Wed Jun 20 04:26:12 EDT 2018


You are missing  CONFIG_NET_DSA_TAG_QCA

On 20 June 2018 at 09:21, Lucian Cristian <luci at powerneth.ro> wrote:

> I tried the example found in bindings and in qca8k staging but I don't
> have any output when the device starts or when the module is loaded, if is
> built as module.
>
> Tried with a qca9563+qca8337n switch and also with a qca9558+qca8327n
> switch with id added to qca8k driver, I also enabled printk on every
> function in the driver but nothing is printed.
>
> I added a new dsa subtarget with this kernel options
>
> # CONFIG_AG71XX is not set
> # CONFIG_AG71XX_DEBUG is not set
> # CONFIG_AG71XX_DEBUG_FS is not set
> # CONFIG_AR8216_PHY is not set
> # CONFIG_AR8216_PHY_LEDS is not set
> # CONFIG_RTL8366RB_PHY is not set
> # CONFIG_RTL8366S_PHY is not set
> # CONFIG_RTL8366_SMI is not set
> # CONFIG_SWCONFIG is not set
> # CONFIG_SWCONFIG_LEDS is not set
> CONFIG_NET_DSA=y
> CONFIG_NET_DSA_RTK_SMI=y
> CONFIG_NET_DSA_QCA8K=y
> CONFIG_NET_NS=y
> CONFIG_NET_PACKET_ENGINE=y
> CONFIG_NET_SWITCHDEV=y
>
> Is there something missing or the problem should be in dts file ?
>
>
> Regards
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/listinfo/openwrt-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20180620/9c9b6800/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list