[OpenWrt-Devel] [PATCH 2/5] ath79: ubnt-bullet-m-xw: Move common DTS bits into XW include file

Petr Štetiar ynezz at true.cz
Mon Dec 10 17:46:25 EST 2018


Most of the M/XW platform settings can be shared so move those common
DTS bits into include file.

Tested-by: Joe Ayers <ae6xe at arrl.net>
Signed-off-by: Petr Štetiar <ynezz at true.cz>
---
 target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts | 11 +++--------
 target/linux/ath79/dts/ar9342_ubnt_xw.dtsi         |  8 ++++++++
 2 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts
index ad98075..7e4862e 100644
--- a/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts
+++ b/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts
@@ -15,20 +15,19 @@
 	status = "okay";
 
 	phy-mask = <4>;
+
 	phy4: ethernet-phy at 4 {
-		phy-mode = "rgmii";
 		reg = <4>;
+		phy-mode = "rgmii";
 	};
 };
 
 &eth0 {
 	status = "okay";
 
-	pll-data = <0x06000000 0x00000101 0x00001313>;
-	mtd-mac-address = <&eeprom 0x0>;
-
 	phy-mode = "rgmii";
 	phy-handle = <&phy4>;
+	mtd-mac-address = <&eeprom 0x0>;
 
 	gmac-config {
 		device = <&gmac>;
@@ -36,7 +35,3 @@
 		rxdv-delay = <3>;
 	};
 };
-
-&eth1 {
-	status = "disabled";
-};
diff --git a/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi b/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi
index 742df11..812810f 100644
--- a/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi
+++ b/target/linux/ath79/dts/ar9342_ubnt_xw.dtsi
@@ -117,3 +117,11 @@
 	mtd-cal-data = <&eeprom 0x1000>;
 	mtd-mac-address = <&eeprom 0x1002>;
 };
+
+&mdio1 {
+	status = "disabled";
+};
+
+&eth1 {
+	status = "disabled";
+};
-- 
1.9.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list