[OpenWrt-Devel] [LEDE-DEV] [PATCH 0/4] Gemini forward-port to kernel v4.14

John Crispin john at phrozen.org
Fri Apr 27 02:18:47 EDT 2018



On 17/04/18 00:34, Roman Yeryomin wrote:
> On 2018-04-15 20:22, Roman Yeryomin wrote:
>> On 2018-04-14 20:36, Hans Ulli Kroll wrote:
>>> Hi Roman
>>>
>>> On Tue, 10 Apr 2018, Linus Walleij wrote:
>>>
>>>> On Mon, Apr 9, 2018 at 12:38 PM, Roman Yeryomin <roman at advem.lv> 
>>>> wrote:
>>>>
>>>> > I have tested them quickly yesterday on nas4220b board. Although 
>>>> I've
>>>> > managed to boot it (had to fix rootfs image) ethernet and usb 
>>>> didn't work.
>>>> > And I didn't check anything else.
>>>> > I didn't yet look at the code but before I dive there I have a 
>>>> question: did
>>>> > you have a chance to test it yourself on any of the boards? And 
>>>> if yes,
>>>> > which one?
>>>>
>>>
>>> I think the fotg controller gets stalled after a port reset.
>>> Please check attached (untested) patch for openwrt.
>>> I can test this next week by myself
>>>
>>> +diff --git a/drivers/usb/host/fotg210-hcd.c 
>>> b/drivers/usb/host/fotg210-hcd.c
>>> +index 2acc51b0be5a..bc9efb49adc7 100644
>>> +--- a/drivers/usb/host/fotg210-hcd.c
>>> ++++ b/drivers/usb/host/fotg210-hcd.c
>>> +@@ -1653,6 +1653,10 @@ static int fotg210_hub_control(struct usb_hcd
>>> *hcd, u16 typeReq, u16 wValue,
>>> +             /* see what we found out */
>>> +             temp = check_reset_complete(fotg210, wIndex, status_reg,
>>> +                     fotg210_readl(fotg210, status_reg));
>>> ++
>>> ++            /* restart schedule */
>>> ++            fotg210->command |= CMD_RUN;
>>> ++            fotg210_writel(fotg210, fotg210->command, 
>>> &fotg210->regs->command);
>>> +         }
>>> +
>>> +         if (!(temp & (PORT_RESUME|PORT_RESET))) {
>>> +--
>>> +2.16.2
>>> +
>>
>> Didn't work for me :(
>>
>
> I've found why it didn't work:
> [    5.845199] Warning! fotg210_hcd should always be loaded before 
> uhci_hcd and ohci_hcd, not after
>
> After fixing kernel config and applying your patch it works.
> So your patch works and is needed indeed.
>
> But there are other problems.
> Second USB (USB1) port cannot be initialized and only USB0 is working:
> [    5.843831] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
> [    5.844298] pinctrl-gemini 40000000.syscon:pinctrl: ACTIVATE 
> function "usb" with group "usbgrp"
> [    5.845067] fotg210-hcd 68000000.usb: initialized Gemini PHY
> [    5.845095] fotg210-hcd 68000000.usb: Faraday USB2.0 Host Controller
> [    5.845176] fotg210-hcd 68000000.usb: new USB bus registered, 
> assigned bus number 1
> [    5.845696] fotg210-hcd 68000000.usb: irq 29, io mem 0x68000000
> [    5.877212] fotg210-hcd 68000000.usb: USB 2.0 started, EHCI 1.00
> [    5.880314] hub 1-0:1.0: USB hub found
> [    5.880546] hub 1-0:1.0: 1 port detected
> [    5.904768] pinctrl-gemini 40000000.syscon:pinctrl: pin T6 USB GNDA 
> U20 already requested by 68000000.usb; cannot claim for 69000000.usb
> [    5.904807] pinctrl-gemini 40000000.syscon:pinctrl: pin-305 
> (69000000.usb) status -22
> [    5.904845] pinctrl-gemini 40000000.syscon:pinctrl: could not 
> request pin 305 (T6 USB GNDA U20) from group usbgrp  on device 
> pinctrl-gemini
> [    5.904872] fotg210-hcd 69000000.usb: Error applying setting, 
> reverse things back
> [    5.904928] fotg210-hcd: probe of 69000000.usb failed with error -22
>
> After removing pinctrl from USB1 it is initialized but then only USB1 
> is working, USB0 is seen but there are no interrupts.
> Didn't yet look at the code, maybe you will know where to fix right away.
>
> Regards,
> Roman
>

Hi,
how shall we proceed ? merge 1, 2 and 3, let roman fix the regressions 
and then merge 4 ? or drop the series for now and let you guys send a V2 
with the regression fixes integrated ?
     John
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list