[OpenWrt-Devel] [PATCH 0/4] Gemini forward-port to kernel v4.14
roman at advem.lv
Sun Apr 15 20:00:44 EDT 2018
On 2018-04-12 00:37, Roman Yeryomin wrote:
> On 2018-04-11 00:51, Linus Walleij wrote:
>> On Mon, Apr 9, 2018 at 12:38 PM, Roman Yeryomin <roman at advem.lv>
>>> I have tested them quickly yesterday on nas4220b board. Although I've
>>> managed to boot it (had to fix rootfs image) ethernet and usb didn't
>>> And I didn't check anything else.
>>> I didn't yet look at the code but before I dive there I have a
>>> question: did
>>> you have a chance to test it yourself on any of the boards? And if
>>> which one?
>> Hm I tested mostly the rootfs and that the kernel would get to prompt.
>> But for my D-Link devices I tested mostly with kernel v4.16 because
>> I'm working close to mainline. Testing now it seems network is not
>> coming up here either :/ as it works like a charm on v4.16 it must
>> be some minor issue.
> Looking at your tree...
> I don't see any (affecting) differences in ethernet driver itself.
> Probably it's something else.. MDIO?
After looking into ethernet I've found several issues.
1. skew delay settings were not ported from old driver to dts for
2. kernel config in you patches (accidentally?) disabled bridge support
3. driver crashes if you try to disable unused gmac in dts because of
access to uninitialized port(0|1) member of struct gemini_ethernet
So after fixing all above ethernet on nas4220b is working ok.
Can you confirm that after enabling bridge support back (just remove
CONFIG_BRIDGE from gemini kernel config and rebuild) ethernet comes up
on D-link boards? That is with default network config.
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel