[OpenWrt-Devel] [PATCH 6/6] [CC] [backport] ramips: add GL-MT750 support

alzhao alzhao at gmail.com
Wed May 4 23:02:10 EDT 2016


Backport changeset 48994
Add GT-MT750 support to CC

Signed-off-by: alzhao <alzhao at gmail.com>
---
 target/linux/ramips/base-files/etc/board.d/01_leds |   3 +
 .../linux/ramips/base-files/etc/board.d/02_network |   7 +
 target/linux/ramips/base-files/lib/ramips.sh       |   3 +
 .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
 target/linux/ramips/dts/GL-MT750.dts               | 159 +++++++++++++++++++++
 target/linux/ramips/image/Makefile                 |   2 +
 target/linux/ramips/mt7620/profiles/gli.mk         |  14 +-
 7 files changed, 187 insertions(+), 2 deletions(-)
 create mode 100644 target/linux/ramips/dts/GL-MT750.dts

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 3886e49..643b3cc 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -153,6 +153,9 @@ case $board in
 	gl-mt300n)
 		set_wifi_led "gl-mt300n:wlan"
 		;;
+	gl-mt750)
+		set_wifi_led "gl-mt750:wlan"
+		;;
 	mpr-a1)
 		set_wifi_led "hame:blue:system"
 		;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 1e91039..227aa63 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -167,6 +167,13 @@ ramips_setup_interfaces()
 		ucidef_add_switch_vlan "switch0" "2" "0 6t"
 		ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
 		;;
+	
+	gl-mt750)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "2" "0 6t"
+		ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
+		;;
 
 	whr-1166d)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 3ebb1b0..fb5be8c 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -175,6 +175,9 @@ ramips_board_detect() {
 	*"GL-MT300N")
 		name="gl-mt300n"
 		;;
+	*"GL-MT750")
+		name="gl-mt750"
+		;;
 	*"Hauppauge Broadway")
 		name="broadway"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 7825af8..7a84aab 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -57,6 +57,7 @@ platform_check_image() {
 	firewrt |\
 	gl-mt300a |\
 	gl-mt300n |\
+	gl-mt750 |\
 	pbr-m1 |\
 	hg255d | \
 	hlk-rm04 | \
diff --git a/target/linux/ramips/dts/GL-MT750.dts b/target/linux/ramips/dts/GL-MT750.dts
new file mode 100644
index 0000000..a36ae5e
--- /dev/null
+++ b/target/linux/ramips/dts/GL-MT750.dts
@@ -0,0 +1,159 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "GL-MT750", "ralink,mt7620a-soc";
+	model = "GL-MT750";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	palmbus at 10000000 {
+		gpio0: gpio at 600 {
+			status = "okay";
+		};
+
+		gpio1: gpio at 638 {
+			status = "okay";
+		};
+
+		gpio2: gpio at 660 {
+			status = "okay";
+		};
+		
+		gpio3: gpio at 688 {
+		      status = "okay";
+		 };
+
+		spi at b00 {
+			status = "okay";
+
+			m25p80 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q128";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "w25q128";
+				spi-max-frequency = <10000000>;
+
+				partition at 0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+				};
+
+				partition at 30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition at 40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition at 50000 {
+					label = "firmware";
+					reg = <0x50000 0xf80000>;
+				};
+
+				partition at ff0000 {
+					label = "art";
+					reg = <0xff0000 0x10000>;
+				};
+			};
+		};
+	};
+
+	sdhci at 10130000 {
+		status = "okay";
+	};
+
+	ehci at 101c0000 {
+		status = "okay";
+	};
+
+	ohci at 101c1000 {
+		status = "okay";
+	};
+
+	ethernet at 10100000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ephy_pins>;
+		mtd-mac-address = <&factory 0x4000>;
+		ralink,port-map = "llllw";
+	};
+
+	wmac at 10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	pcie at 10140000 {
+		status = "okay";
+
+		pcie-bridge {
+			mt76 at 0,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x8000>;
+				mediatek,2ghz = <0>;
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "wled","ephy","uartf";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		wan {
+			label = "gl-mt750:wan";
+			gpios = <&gpio2 0 1>;
+		};
+
+		lan {
+			label = "gl-mt750:lan";
+			gpios = <&gpio2 1 1>;
+		};
+
+		wlan {
+			label = "gl-mt750:wlan";
+			gpios = <&gpio3 0 1>;
+		};
+
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 13 1>;
+			linux,code = <0x198>;
+		};
+
+		BTN_0 {
+			label = "BTN_0";
+			gpios = <&gpio2 2 1>;
+			linux,code = <0x100>;
+		};
+
+  	    BTN_1 {
+			label = "BTN_1";
+			gpios = <&gpio2 3 1>;
+			linux,code = <0x101>;
+		};
+ 	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 9f83b1c..b55b2b0 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -912,6 +912,7 @@ Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,W
 Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),xiaomi-miwifi-mini,XIAOMI-MIWIFI-MINI)
 Image/Build/Profile/GL-MT300A=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt300a,GL-MT300A)
 Image/Build/Profile/GL-MT300N=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt300n,GL-MT300N)
+Image/Build/Profile/GL-MT750=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt750,GL-MT750)
 Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
 Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
 Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
@@ -948,6 +949,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/XIAOMI-MIWIFI-MINI,$(1))
 	$(call Image/Build/Profile/GL-MT300A,$(1))
 	$(call Image/Build/Profile/GL-MT300N,$(1))
+	$(call Image/Build/Profile/GL-MT750,$(1))
 	$(call Image/Build/Profile/ZTE-Q7,$(1))
 	$(call Image/Build/Profile/ZBT-WA05,$(1))
 	$(call Image/Build/Profile/ArcherC20i,$(1))
diff --git a/target/linux/ramips/mt7620/profiles/gli.mk b/target/linux/ramips/mt7620/profiles/gli.mk
index ce407e2..0154bbc 100644
--- a/target/linux/ramips/mt7620/profiles/gli.mk
+++ b/target/linux/ramips/mt7620/profiles/gli.mk
@@ -16,11 +16,21 @@ endef
 $(eval $(call Profile,GL-MT300A))
 
 define Profile/GL-MT300N
-    NAME:=GL-MT300N
-    PACKAGES:=kmod-usb-core kmod-usb-dwc2 kmod-usb2 kmod-usb-ohci kmod-mt76
+	NAME:=GL-MT300N
+	PACKAGES:=kmod-usb-core kmod-usb-dwc2 kmod-usb2 kmod-usb-ohci kmod-mt76
 endef
 
 define Profile/GL-MT300N/Description
     Support for gl-mt300n Router
 endef
 $(eval $(call Profile,GL-MT300N))
+
+define Profile/GL-MT750
+	NAME:=GL-MT750
+	PACKAGES:=kmod-usb-core kmod-usb-dwc2 kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-mt7610e
+endef
+
+define Profile/GL-MT750/Description
+    Support for gl-mt750 Router
+endef
+$(eval $(call Profile,GL-MT750))
-- 
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list