[OpenWrt-Devel] Patch: Support for TP-Link WR-802N

John Crispin blogic at openwrt.org
Fri Feb 12 03:22:49 EST 2016


Hi Rick,

please read the howto for submitting patches. the actual patches look
fine at first glance, but they format in which you sent them is bad i am
afraid. the howto explains how to send the patches properly.

	John

On 21/01/2016 18:17, Rick Pannen wrote:
> Hi,
> 
> I added support for the TP-Link 802N (http://www.tp-link.com/en/products/details/cat-9_TL-WR802N.html) to trunk.
> Everything is based on the existing WR841N_V9 code (same chipset).
> The resulting firmware can be flashed onto a factory device and runs without any problems on my 2 test devices.
> 
> 
> 
> Arch code (target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr802n.c):
> ———
> 
> /*
> *  TP-LINK TL-WR802N
> *
> *  Copyright (C) 2015 Rick Pannen <pannen at gmail.com>
> *
> *  This program is free software; you can redistribute it and/or modify it
> *  under the terms of the GNU General Public License version 2 as published
> *  by the Free Software Foundation.
> */
> 
> #include <linux/gpio.h>
> #include <linux/platform_device.h>
> 
> #include <asm/mach-ath79/ath79.h>
> #include <asm/mach-ath79/ar71xx_regs.h>
> 
> #include "common.h"
> #include "dev-eth.h"
> #include "dev-gpio-buttons.h"
> #include "dev-leds-gpio.h"
> #include "dev-m25p80.h"
> #include "dev-wmac.h"
> #include "machtypes.h"
> 
> #define TL_WR802N_GPIO_LED_SYSTEM	13
> #define TL_WR802N_GPIO_BTN_RESET	11
> 
> #define TL_WR802N_KEYS_POLL_INTERVAL	20	/* msecs */
> #define TL_WR802N_KEYS_DEBOUNCE_INTERVAL	(3 * TL_WR802N_KEYS_POLL_INTERVAL)
> 
> static const char *tl_wr802n_part_probes[] = {
> 	"tp-link",
> 	NULL,
> };
> 
> static struct flash_platform_data tl_wr802n_flash_data = {
> 	.part_probes	= tl_wr802n_part_probes,
> };
> 
> static struct gpio_led tl_wr802n_leds_gpio[] __initdata = {
> 	{
> 		.name		= "tp-link:blue:system",
> 		.gpio		= TL_WR802N_GPIO_LED_SYSTEM,
> 		.active_low	= 1,
> 	},
> };
> 
> static struct gpio_keys_button tl_wr802n_gpio_keys[] __initdata = {
> 	{
> 		.desc		= "reset",
> 		.type		= EV_KEY,
> 		.code		= KEY_RESTART,
> 		.debounce_interval = TL_WR802N_KEYS_DEBOUNCE_INTERVAL,
> 		.gpio		= TL_WR802N_GPIO_BTN_RESET,
> 		.active_low	= 0,
> 	}
> };
> 
> static void __init tl_ap143_setup(void)
> {
>        u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
>        u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
>        u8 tmpmac[ETH_ALEN];
> 
>        ath79_register_m25p80(&tl_wr802n_flash_data);
> 
>        ath79_setup_ar933x_phy4_switch(false, false);
> 
>        ath79_register_mdio(0, 0x0);
> 
>        /* LAN */
>        ath79_switch_data.phy4_mii_en = 1;
>        ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
>        ath79_eth0_data.duplex = DUPLEX_FULL;
>        ath79_eth0_data.speed = SPEED_100;
>        ath79_eth0_data.phy_mask = BIT(4);
>        ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
>        ath79_register_eth(0);
> 
>        ath79_init_mac(tmpmac, mac, 0);
>        ath79_register_wmac(ee, tmpmac);
> };
> 
> static void __init tl_wr802n_setup(void)
> {
> 	tl_ap143_setup();
> 
> 	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr802n_leds_gpio),
> 				 tl_wr802n_leds_gpio);
> 
> 	ath79_register_gpio_keys_polled(1, TL_WR802N_KEYS_POLL_INTERVAL,
> 					ARRAY_SIZE(tl_wr802n_gpio_keys),
> 					tl_wr802n_gpio_keys);
> }
> 
> MIPS_MACHINE(ATH79_MACH_TL_WR802N, "TL-WR802N", "TP-LINK TL-WR802N“, tl_wr802n_setup);
> 
> ———
> 
> 
> 
> OpenWRT patches:
> ———
> 
> diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> index 151eac2..7825fa6 100755
> --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> @@ -562,6 +562,10 @@ tl-wr741nd-v4)
> 	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
> 	;;
> 
> +tl-wr802n)
> +	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt"
> +	;;
> +
> tl-wr841n-v8 | \
> tl-wr941nd-v5)
> 	ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
> diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
> index 51a1b64..d54ec79 100755
> --- a/target/linux/ar71xx/base-files/etc/board.d/02_network
> +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
> @@ -359,6 +359,7 @@ tl-wa901nd |\
> tl-wa901nd-v2 |\
> tl-wa901nd-v3 |\
> tl-wr703n |\
> +tl-wr802n |\
> tube2h |\
> wndap360 |\
> mynet-rext |\
> diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
> index c0e73ad..8cdaae0 100644
> --- a/target/linux/ar71xx/base-files/etc/diag.sh
> +++ b/target/linux/ar71xx/base-files/etc/diag.sh
> @@ -286,6 +286,9 @@ get_status_led() {
> 	tl-wa860re)
> 		status_led="tp-link:green:power"
> 		;;
> +	tl-wr802n)
> +		status_led="tp-link:blue:system"
> +		;;
> 	tl-mr3220 | \
> 	tl-mr3220-v2 | \
> 	tl-mr3420 | \
> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> index 34d5741..d63067a 100755
> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> @@ -162,6 +162,9 @@ tplink_board_detect() {
> 	"080100"*)
> 		model="TP-Link TL-WA801N/ND"
> 		;;
> +	"080200"*)
> +                model="TP-Link TL-WR802N"
> +                ;;
> 	"083000"*)
> 		model="TP-Link TL-WA830RE"
> 
> @@ -854,6 +857,9 @@ ar71xx_board_detect() {
> 	*"TL-WR741ND v4")
> 		name="tl-wr741nd-v4"
> 		;;
> +	*"TL-WR802N")
> +                name="tl-wr802n"
> +                ;;
> 	*"TL-WR841N v1")
> 		name="tl-wr841n-v1"
> 		;;
> diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> index 0276a69..1b43261 100755
> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> @@ -366,6 +366,7 @@ platform_check_image() {
> 	tl-wr720n-v3 | \
> 	tl-wr741nd | \
> 	tl-wr741nd-v4 | \
> +	tl-wr802n | \
> 	tl-wr841n-v1 | \
> 	tl-wa830re-v2 | \
> 	tl-wr841n-v7 | \
> diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
> index fe1dd68..6d35b4f 100644
> --- a/target/linux/ar71xx/config-4.1
> +++ b/target/linux/ar71xx/config-4.1
> @@ -150,6 +150,7 @@ CONFIG_ATH79_MACH_TL_WR703N=y
> CONFIG_ATH79_MACH_TL_WR720N_V3=y
> CONFIG_ATH79_MACH_TL_WR741ND=y
> CONFIG_ATH79_MACH_TL_WR741ND_V4=y
> +CONFIG_ATH79_MACH_TL_WR802N=y
> CONFIG_ATH79_MACH_TL_WR841N_V1=y
> CONFIG_ATH79_MACH_TL_WR841N_V8=y
> CONFIG_ATH79_MACH_TL_WR841N_V9=y
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> index da26414..5ad9af6 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> @@ -1202,6 +1202,15 @@ config ATH79_MACH_TL_WR741ND_V4
> 	select ATH79_DEV_USB
> 	select ATH79_DEV_WMAC
> 
> +config ATH79_MACH_TL_WR802N
> +       bool "TP-LINK TL-WR802N support"
> +       select SOC_QCA953X
> +       select ATH79_DEV_ETH
> +       select ATH79_DEV_GPIO_BUTTONS
> +       select ATH79_DEV_LEDS_GPIO
> +       select ATH79_DEV_M25P80
> +       select ATH79_DEV_WMAC
> +
> config ATH79_MACH_TL_WR841N_V1
> 	bool "TP-LINK TL-WR841N v1 support"
> 	select SOC_AR71XX
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> index 991f6f2..75c0a4f 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> @@ -151,6 +151,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WDR4300)     += mach-tl-wdr4300.o
> obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2)  += mach-tl-wdr6500-v2.o
> obj-$(CONFIG_ATH79_MACH_TL_WR741ND)	+= mach-tl-wr741nd.o
> obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4)	+= mach-tl-wr741nd-v4.o
> +obj-$(CONFIG_ATH79_MACH_TL_WR802N)  	+= mach-tl-wr802n.o
> obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1)	+= mach-tl-wr841n.o
> obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8)	+= mach-tl-wr841n-v8.o
> obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9)	+= mach-tl-wr841n-v9.o
> @@ -178,9 +179,9 @@ obj-$(CONFIG_ATH79_MACH_WNR2000_V4)	+= mach-wnr2000-v4.o
> obj-$(CONFIG_ATH79_MACH_WNR2200)	+= mach-wnr2200.o
> obj-$(CONFIG_ATH79_MACH_WP543)		+= mach-wp543.o
> obj-$(CONFIG_ATH79_MACH_WPE72)		+= mach-wpe72.o
> -obj-$(CONFIG_ATH79_MACH_WPJ344)	+= mach-wpj344.o
> -obj-$(CONFIG_ATH79_MACH_WPJ531)	+= mach-wpj531.o
> -obj-$(CONFIG_ATH79_MACH_WPJ558)	+= mach-wpj558.o
> +obj-$(CONFIG_ATH79_MACH_WPJ344)		+= mach-wpj344.o
> +obj-$(CONFIG_ATH79_MACH_WPJ531)		+= mach-wpj531.o
> +obj-$(CONFIG_ATH79_MACH_WPJ558)		+= mach-wpj558.o
> obj-$(CONFIG_ATH79_MACH_WRT160NL)	+= mach-wrt160nl.o
> obj-$(CONFIG_ATH79_MACH_WRT400N)	+= mach-wrt400n.o
> obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH)	+= mach-wzr-hp-g300nh.o
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> index a170e8d..276fbb9 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> @@ -184,6 +184,7 @@ enum ath79_mach_type {
> 	ATH79_MACH_TL_WR720N_V3,	/* TP-LINK TL-WR720N v3/v4 */
> 	ATH79_MACH_TL_WR741ND,		/* TP-LINK TL-WR741ND */
> 	ATH79_MACH_TL_WR741ND_V4,	/* TP-LINK TL-WR741ND  v4*/
> +	ATH79_MACH_TL_WR802N,		/* TP-LINK TL-WR802N */
> 	ATH79_MACH_TL_WR841N_V1,	/* TP-LINK TL-WR841N v1 */
> 	ATH79_MACH_TL_WR841N_V7,	/* TP-LINK TL-WR841N/ND v7 */
> 	ATH79_MACH_TL_WR841N_V8,	/* TP-LINK TL-WR841N/ND v8 */
> diff --git a/target/linux/ar71xx/generic/profiles/tp-link.mk b/target/linux/ar71xx/generic/profiles/tp-link.mk
> index 2875290..ced7ba8 100644
> --- a/target/linux/ar71xx/generic/profiles/tp-link.mk
> +++ b/target/linux/ar71xx/generic/profiles/tp-link.mk
> @@ -331,6 +331,15 @@ define Profile/TLWR743/Description
> endef
> $(eval $(call Profile,TLWR743))
> 
> +define Profile/TLWR802
> +        NAME:=TP-LINK TL-WR802N
> +        PACKAGES:=
> +endef
> +
> +define Profile/TLWR802/Description
> +        Package set optimized for the TP-LINK TL-WR802N.
> +endef
> +$(eval $(call Profile,TLWR802))
> 
> define Profile/TLWR841
> 	NAME:=TP-LINK TL-WR841N/ND
> diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
> index 6483284..aac1fb3 100644
> --- a/target/linux/ar71xx/image/Makefile
> +++ b/target/linux/ar71xx/image/Makefile
> @@ -759,6 +759,15 @@ define Device/tl-wr743nd-v2
> endef
> TARGET_DEVICES += tl-wr740n-v1 tl-wr740n-v3 tl-wr740n-v4 tl-wr740n-v5 tl-wr741nd-v1 tl-wr741nd-v2 tl-wr741nd-v4 tl-wr741nd-v5 tl-wr743nd-v1 tl-wr743nd-v2
> 
> +define Device/tl-wr802n
> +    $(Device/tplink-4mlzma)
> +    BOARDNAME := TL-WR802N
> +    DEVICE_PROFILE := TLWR802
> +    TPLINK_HWID := 0x08020001
> +    TPLINK_HWREV := 1
> +endef
> +TARGET_DEVICES += tl-wr802n
> +
> define Device/tl-wr841nd-v1.5
>     $(Device/tplink-4m)
>     BOARDNAME := TL-WR841N-v1.5
> diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
> index 88ac6cf..eb5657c 100644
> --- a/target/linux/ar71xx/mikrotik/config-default
> +++ b/target/linux/ar71xx/mikrotik/config-default
> @@ -97,6 +97,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
> # CONFIG_ATH79_MACH_TL_WR720N_V3 is not set
> # CONFIG_ATH79_MACH_TL_WR741ND is not set
> # CONFIG_ATH79_MACH_TL_WR741ND_V4 is not set
> +# CONFIG_ATH79_MACH_TL_WR802N is not set
> # CONFIG_ATH79_MACH_TL_WR841N_V1 is not set
> # CONFIG_ATH79_MACH_TL_WR841N_V8 is not set
> # CONFIG_ATH79_MACH_TL_WR841N_V9 is not set
> 
> ———
> 
> 
> have a nice day,
> Rick
> 
> 
> 
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list