[OpenWrt-Devel] [PATCH 1/3] ramips: Add DTS files for HiWiFi HC5x61 models

Comman Kang kangxn at 163.com
Mon Sep 28 10:49:21 EDT 2015


Done, Thanks for the comment, please take a look at V2




在 15/9/28 下午7:25,“Piotr Dymacz”<pepe2k at gmail.com> 写入:

>Hello,
>
>Please, take a look at other dts files in ramips target and follow the
>general convention, like:
>- use only model name for dts filename
>- keep empty lines between nodes and between nodes and properties (ex. [1])
>
>[1] https://dev.openwrt.org/browser/trunk/target/linux/ramips/dts/WIZFI630A.dts#L126
>
>Cheers,
>Piotr
>
>2015-09-28 12:45 GMT+02:00 Comman Kang <kangxn at 163.com>:
>> HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them.
>>
>> The original author is Justin Liu (rssnsj at gmail.com). I ported the patch to trunk and submitted it here with his approval.
>>
>> Signed-off-by: Xiaoning Kang <kangxn at 163.com>
>>
>>
>>
>> diff --git a/target/linux/ramips/dts/HiWiFi-HC5661.dts b/target/linux/ramips/dts/HiWiFi-HC5661.dts
>> new file mode 100644
>> index 0000000..f3ca70c
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/HiWiFi-HC5661.dts
>> @@ -0,0 +1,162 @@
>> +/dts-v1/;
>> +
>> +/include/ "mt7620a.dtsi"
>> +
>> +/ {
>> +       compatible = "HiWiFi-HC5661", "ralink,mt7620a-soc";
>> +       model = "HiWiFi HC5661";
>> +
>> +       chosen {
>> +               bootargs = "console=ttyS0,115200";
>> +       };
>> +
>> +       palmbus at 10000000 {
>> +               sysc at 0 {
>> +                       ralink,gpiomux = "i2c", "jtag";
>> +                       ralink,uartmux = "gpio";
>> +                       ralink,wdtmux = <1>;
>> +               };
>> +               gpio0: gpio at 600 {
>> +                       status = "okay";
>> +               };
>> +               gpio2: gpio at 660 {
>> +                       status = "okay";
>> +               };
>> +               gpio3: gpio at 688 {
>> +                       status = "okay";
>> +               };
>> +
>> +               spi at b00 {
>> +                       status = "okay";
>> +
>> +                       m25p80 at 0 {
>> +                               #address-cells = <1>;
>> +                               #size-cells = <1>;
>> +                               compatible = "w25q128";
>> +                               reg = <0 0>;
>> +                               linux,modalias = "m25p80", "w25q128";
>> +                               spi-max-frequency = <10000000>;
>> +
>> +                               partition at 0 {
>> +                                       label = "u-boot";
>> +                                       reg = <0x0 0x30000>;
>> +                               };
>> +
>> +                               partition at 30000 {
>> +                                       label = "u-boot-env";
>> +                                       reg = <0x30000 0x10000>;
>> +                                       read-only;
>> +                               };
>> +
>> +                               factory: partition at 40000 {
>> +                                       label = "factory";
>> +                                       reg = <0x40000 0x10000>;
>> +                               };
>> +
>> +                               partition at 50000 {
>> +                                       label = "firmware";
>> +                                       reg = <0x50000 0xf80000>;
>> +                               };
>> +
>> +                               partition at fd0000 {
>> +                                       label = "hwf_config";
>> +                                       reg = <0xfd0000 0x10000>;
>> +                               };
>> +
>> +                               bdinfo: partition at fe0000 {
>> +                                       label = "bdinfo";
>> +                                       reg = <0xfe0000 0x10000>;
>> +                               };
>> +
>> +                               partition at ff0000 {
>> +                                       label = "backup";
>> +                                       reg = <0xff0000 0x10000>;
>> +                               };
>> +                       };
>> +               };
>> +       };
>> +
>> +       ehci at 101c0000 {
>> +               status = "okay";
>> +       };
>> +
>> +       ohci at 101c1000 {
>> +               status = "okay";
>> +       };
>> +
>> +       ethernet at 10100000 {
>> +               pinctrl-names = "default";
>> +               pinctrl-0 = <&ephy_pins>;
>> +               mtd-mac-address = <&factory 0x4>;
>> +               ralink,port-map = "wllll";
>> +       };
>> +
>> +       sdhci at 10130000 {
>> +               status = "okay";
>> +       };
>> +
>> +       wmac at 10180000 {
>> +               ralink,mtd-eeprom = <&factory 0>;
>> +       };
>> +
>> +       pcie at 10140000 {
>> +               status = "okay";
>> +       };
>> +
>> +       pinctrl {
>> +               state_default: pinctrl0 {
>> +                       gpio {
>> +                               ralink,group = "uartf", "wled", "nd_sd";
>> +                               ralink,function = "gpio";
>> +                       };
>> +                       pa {
>> +                               ralink,group = "pa";
>> +                               ralink,function = "pa";
>> +                       };
>> +               };
>> +       };
>> +
>> +       gpio-leds {
>> +               compatible = "gpio-leds";
>> +               system {
>> +                       label = "hiwifi-5661:blue:system";
>> +                       gpios = <&gpio0 9 1>;
>> +               };
>> +               internet {
>> +                       label = "hiwifi-5661:blue:internet";
>> +                       gpios = <&gpio0 11 1>;
>> +               };
>> +               wlan2p4 {
>> +                       label = "hiwifi-5661:blue:wlan-2p4";
>> +                       gpios = <&gpio3 0 1>;
>> +               };
>> +               wlan5p {
>> +                       label = "hiwifi-5661:blue:wlan-5p";
>> +                       gpios = <&gpio0 7 1>;
>> +               };
>> +       };
>> +
>> +       gpio-keys-polled {
>> +               compatible = "gpio-keys-polled";
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +               poll-interval = <20>;
>> +               reset {
>> +                       label = "reset";
>> +                       gpios = <&gpio0 12 1>;
>> +                       linux,code = <0x198>;
>> +               };
>> +       };
>> +
>> +       gpio_export {
>> +               compatible = "gpio-export";
>> +               #size-cells = <0>;
>> +               usbpower {
>> +                       gpio-export,name = "usbpower";
>> +                       gpio-export,output = <1>;
>> +                       gpios = <&gpio0 13 0>;
>> +               };
>> +       };
>> +
>> +};
>> +
>> diff --git a/target/linux/ramips/dts/HiWiFi-HC5761.dts b/target/linux/ramips/dts/HiWiFi-HC5761.dts
>> new file mode 100644
>> index 0000000..1340751
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/HiWiFi-HC5761.dts
>> @@ -0,0 +1,162 @@
>> +/dts-v1/;
>> +
>> +/include/ "mt7620a.dtsi"
>> +
>> +/ {
>> +       compatible = "HiWiFi-HC5761", "ralink,mt7620a-soc";
>> +       model = "HiWiFi HC5761";
>> +
>> +       chosen {
>> +               bootargs = "console=ttyS0,115200";
>> +       };
>> +
>> +       palmbus at 10000000 {
>> +               sysc at 0 {
>> +                       ralink,gpiomux = "i2c", "jtag";
>> +                       ralink,uartmux = "gpio";
>> +                       ralink,wdtmux = <1>;
>> +               };
>> +               gpio0: gpio at 600 {
>> +                       status = "okay";
>> +               };
>> +               gpio2: gpio at 660 {
>> +                       status = "okay";
>> +               };
>> +               gpio3: gpio at 688 {
>> +                       status = "okay";
>> +               };
>> +
>> +               spi at b00 {
>> +                       status = "okay";
>> +
>> +                       m25p80 at 0 {
>> +                               #address-cells = <1>;
>> +                               #size-cells = <1>;
>> +                               compatible = "w25q128";
>> +                               reg = <0 0>;
>> +                               linux,modalias = "m25p80", "w25q128";
>> +                               spi-max-frequency = <10000000>;
>> +
>> +                               partition at 0 {
>> +                                       label = "u-boot";
>> +                                       reg = <0x0 0x30000>;
>> +                               };
>> +
>> +                               partition at 30000 {
>> +                                       label = "u-boot-env";
>> +                                       reg = <0x30000 0x10000>;
>> +                                       read-only;
>> +                               };
>> +
>> +                               factory: partition at 40000 {
>> +                                       label = "factory";
>> +                                       reg = <0x40000 0x10000>;
>> +                               };
>> +
>> +                               partition at 50000 {
>> +                                       label = "firmware";
>> +                                       reg = <0x50000 0xf80000>;
>> +                               };
>> +
>> +                               partition at fd0000 {
>> +                                       label = "hwf_config";
>> +                                       reg = <0xfd0000 0x10000>;
>> +                               };
>> +
>> +                               bdinfo: partition at fe0000 {
>> +                                       label = "bdinfo";
>> +                                       reg = <0xfe0000 0x10000>;
>> +                               };
>> +
>> +                               partition at ff0000 {
>> +                                       label = "backup";
>> +                                       reg = <0xff0000 0x10000>;
>> +                               };
>> +                       };
>> +               };
>> +       };
>> +
>> +       ehci at 101c0000 {
>> +               status = "okay";
>> +       };
>> +
>> +       ohci at 101c1000 {
>> +               status = "okay";
>> +       };
>> +
>> +       ethernet at 10100000 {
>> +               pinctrl-names = "default";
>> +               pinctrl-0 = <&ephy_pins>;
>> +               mtd-mac-address = <&factory 0x4>;
>> +               ralink,port-map = "wllll";
>> +       };
>> +
>> +       sdhci at 10130000 {
>> +               status = "okay";
>> +       };
>> +
>> +       wmac at 10180000 {
>> +               ralink,mtd-eeprom = <&factory 0>;
>> +       };
>> +
>> +       pcie at 10140000 {
>> +               status = "okay";
>> +       };
>> +
>> +       pinctrl {
>> +               state_default: pinctrl0 {
>> +                       gpio {
>> +                               ralink,group = "uartf", "wled", "nd_sd";
>> +                               ralink,function = "gpio";
>> +                       };
>> +                       pa {
>> +                               ralink,group = "pa";
>> +                               ralink,function = "pa";
>> +                       };
>> +               };
>> +       };
>> +
>> +       gpio-leds {
>> +               compatible = "gpio-leds";
>> +               system {
>> +                       label = "hiwifi-5761:blue:system";
>> +                       gpios = <&gpio0 9 1>;
>> +               };
>> +               internet {
>> +                       label = "hiwifi-5761:blue:internet";
>> +                       gpios = <&gpio0 11 1>;
>> +               };
>> +               wlan2p4 {
>> +                       label = "hiwifi-5761:blue:wlan-2p4";
>> +                       gpios = <&gpio3 0 1>;
>> +               };
>> +               wlan5p {
>> +                       label = "hiwifi-5761:blue:wlan-5p";
>> +                       gpios = <&gpio0 7 1>;
>> +               };
>> +       };
>> +
>> +       gpio-keys-polled {
>> +               compatible = "gpio-keys-polled";
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +               poll-interval = <20>;
>> +               reset {
>> +                       label = "reset";
>> +                       gpios = <&gpio0 12 1>;
>> +                       linux,code = <0x198>;
>> +               };
>> +       };
>> +
>> +       gpio_export {
>> +               compatible = "gpio-export";
>> +               #size-cells = <0>;
>> +               usbpower {
>> +                       gpio-export,name = "usbpower";
>> +                       gpio-export,output = <1>;
>> +                       gpios = <&gpio0 13 0>;
>> +               };
>> +       };
>> +
>> +};
>> +
>> diff --git a/target/linux/ramips/dts/HiWiFi-HC5861.dts b/target/linux/ramips/dts/HiWiFi-HC5861.dts
>> new file mode 100644
>> index 0000000..2d68e69
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/HiWiFi-HC5861.dts
>> @@ -0,0 +1,203 @@
>> +/dts-v1/;
>> +
>> +/include/ "mt7620a.dtsi"
>> +
>> +/ {
>> +       compatible = "HiWiFi-HC5861", "ralink,mt7620a-soc";
>> +       model = "HiWiFi HC5861";
>> +
>> +       chosen {
>> +               bootargs = "console=ttyS0,115200";
>> +       };
>> +
>> +       palmbus at 10000000 {
>> +               sysc at 0 {
>> +                       ralink,gpiomux = "i2c", "jtag";
>> +                       ralink,uartmux = "gpio";
>> +                       ralink,wdtmux = <1>;
>> +               };
>> +               gpio0: gpio at 600 {
>> +                       status = "okay";
>> +               };
>> +               gpio2: gpio at 660 {
>> +                       status = "okay";
>> +               };
>> +               gpio3: gpio at 688 {
>> +                       status = "okay";
>> +               };
>> +
>> +               spi at b00 {
>> +                       status = "okay";
>> +
>> +                       m25p80 at 0 {
>> +                               #address-cells = <1>;
>> +                               #size-cells = <1>;
>> +                               compatible = "w25q128";
>> +                               reg = <0 0>;
>> +                               linux,modalias = "m25p80", "w25q128";
>> +                               spi-max-frequency = <10000000>;
>> +
>> +                               partition at 0 {
>> +                                       label = "u-boot";
>> +                                       reg = <0x0 0x30000>;
>> +                               };
>> +
>> +                               partition at 30000 {
>> +                                       label = "u-boot-env";
>> +                                       reg = <0x30000 0x10000>;
>> +                                       read-only;
>> +                               };
>> +
>> +                               factory: partition at 40000 {
>> +                                       label = "factory";
>> +                                       reg = <0x40000 0x10000>;
>> +                               };
>> +
>> +                               partition at 50000 {
>> +                                       label = "firmware";
>> +                                       reg = <0x50000 0xf80000>;
>> +                               };
>> +
>> +                               partition at fd0000 {
>> +                                       label = "hwf_config";
>> +                                       reg = <0xfd0000 0x10000>;
>> +                               };
>> +
>> +                               bdinfo: partition at fe0000 {
>> +                                       label = "bdinfo";
>> +                                       reg = <0xfe0000 0x10000>;
>> +                               };
>> +
>> +                               partition at ff0000 {
>> +                                       label = "backup";
>> +                                       reg = <0xff0000 0x10000>;
>> +                               };
>> +                       };
>> +               };
>> +       };
>> +
>> +       ehci at 101c0000 {
>> +               status = "okay";
>> +       };
>> +
>> +       ohci at 101c1000 {
>> +               status = "okay";
>> +       };
>> +
>> +       ethernet at 10100000 {
>> +               status = "okay";
>> +               mtd-mac-address = <&factory 0x4>;
>> +               pinctrl-names = "default";
>> +               pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
>> +
>> +               ralink,port-map = "wllll";
>> +
>> +               port at 4 {
>> +                       status = "okay";
>> +                       phy-handle = <&phy4>;
>> +                       phy-mode = "rgmii";
>> +               };
>> +
>> +               port at 5 {
>> +                       status = "okay";
>> +                       phy-handle = <&phy5>;
>> +                       phy-mode = "rgmii";
>> +               };
>> +
>> +               mdio-bus {
>> +                       status = "okay";
>> +
>> +                       phy4: ethernet-phy at 4 {
>> +                               reg = <4>;
>> +                               phy-mode = "rgmii";
>> +                       };
>> +
>> +                       phy5: ethernet-phy at 5 {
>> +                               reg = <5>;
>> +                               phy-mode = "rgmii";
>> +                       };
>> +               };
>> +       };
>> +
>> +       gsw at 10110000 {
>> +               ralink,port4 = "gmac";
>> +       };
>> +
>> +       sdhci at 10130000 {
>> +               status = "okay";
>> +       };
>> +
>> +       wmac at 10180000 {
>> +               ralink,mtd-eeprom = <&factory 0>;
>> +       };
>> +
>> +       pcie at 10140000 {
>> +               status = "okay";
>> +       };
>> +
>> +       pinctrl {
>> +               state_default: pinctrl0 {
>> +                       gpio {
>> +                               ralink,group = "uartf", "wled", "nd_sd";
>> +                               ralink,function = "gpio";
>> +                       };
>> +                       pa {
>> +                               ralink,group = "pa";
>> +                               ralink,function = "pa";
>> +                       };
>> +               };
>> +       };
>> +
>> +       gpio-leds {
>> +               compatible = "gpio-leds";
>> +               system {
>> +                       label = "hiwifi-5861:blue:system";
>> +                       gpios = <&gpio0 9 1>;
>> +               };
>> +               wlan2p4 {
>> +                       label = "hiwifi-5861:blue:wlan-2p4";
>> +                       gpios = <&gpio0 11 1>;
>> +               };
>> +               internet {
>> +                       label = "hiwifi-5861:blue:internet";
>> +                       gpios = <&gpio3 0 1>;
>> +               };
>> +               wlan5p {
>> +                       label = "hiwifi-5861:blue:wlan-5p";
>> +                       gpios = <&gpio0 7 1>;
>> +               };
>> +               turbo {
>> +                       label = "hiwifi-5861:blue:turbo";
>> +                       gpios = <&gpio0 10 1>;
>> +               };
>> +       };
>> +
>> +       gpio-keys-polled {
>> +               compatible = "gpio-keys-polled";
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +               poll-interval = <20>;
>> +               reset {
>> +                       label = "reset";
>> +                       gpios = <&gpio0 12 1>;
>> +                       linux,code = <0x198>;
>> +               };
>> +       };
>> +
>> +       gpio_export {
>> +               compatible = "gpio-export";
>> +               #size-cells = <0>;
>> +               usbpower {
>> +                       gpio-export,name = "usbpower";
>> +                       gpio-export,output = <0>;
>> +                       gpios = <&gpio0 13 0>;
>> +               };
>> +               sdpower {
>> +                       gpio-export,name = "sdpower";
>> +                       gpio-export,output = <0>;
>> +                       gpios = <&gpio0 8 0>;
>> +               };
>> +       };
>> +
>> +};
>> +
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list