[OpenWrt-Devel] [PATCH] ar71xx: add support for qca955x sgmii/serdes calibration

Chris Blake chrisrblake93 at gmail.com
Thu Sep 17 08:38:01 EDT 2015


This patch is to add support for sgmii/serdes calibration from within the
OpenWRT environment. This is needed on boards that do not use u-boot or do
not have a pre-init process that runs calibration.

Signed-off-by: Chris R Blake <chrisrblake93 at gmail.com>

---

--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h 2015-08-05
12:58:15.580496899 +0200
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h 2015-08-05
13:52:32.590857293 +0200
@@ -360,6 +360,7 @@
 #define QCA955X_PLL_CLK_CTRL_REG 0x08
 #define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
 #define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
+#define QCA955X_PLL_ETH_SGMII_SERDES_REG 0x4c

 #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
 #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
@@ -392,6 +393,10 @@
 #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
 #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)

+#define QCA955X_PLL_ETH_SGMII_SERDES_LOCK_DETECT BIT(2)
+#define QCA955X_PLL_ETH_SGMII_SERDES_PLL_REFCLK BIT(1)
+#define QCA955X_PLL_ETH_SGMII_SERDES_EN_PLL BIT(0)
+
 #define QCA956X_PLL_CPU_CONFIG_REG 0x00
 #define QCA956X_PLL_CPU_CONFIG1_REG 0x04
 #define QCA956X_PLL_DDR_CONFIG_REG 0x08
@@ -1104,5 +1109,11 @@
 #define QCA955X_ETH_CFG_RDV_DELAY BIT(16)
 #define QCA955X_ETH_CFG_RDV_DELAY_MASK 0x3
 #define QCA955X_ETH_CFG_RDV_DELAY_SHIFT 16
+
+#define QCA955X_GMAC_REG_SGMII_SERDES 0x0018
+#define QCA955X_SGMII_SERDES_RES_CALIBRATION BIT(23)
+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
+#define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15)

 #endif /* __ASM_MACH_AR71XX_REGS_H */
--- a/arch/mips/ath79/dev-eth.c 2015-08-05 14:17:25.757504251 +0200
+++ b/arch/mips/ath79/dev-eth.c 2015-08-05 14:09:54.716333554 +0200
@@ -849,6 +849,37 @@ void __init ath79_setup_qca955x_eth_rx_d
  iounmap(base);
 }

+void __init ath79_setup_qca955x_eth_serdes_cal(unsigned int sgmii_value)
+{
+ void __iomem *ethbase, *pllbase;
+ u32 t;
+
+ ethbase = ioremap_nocache(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
+ pllbase = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
+
+ /* To Check the locking of the SGMII PLL */
+ t = __raw_readl(ethbase + QCA955X_GMAC_REG_SGMII_SERDES);
+ t &= ~(QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK <<
+       QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT);
+ t |= (sgmii_value & QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK) <<
+     QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT;
+ __raw_writel(t, ethbase + QCA955X_GMAC_REG_SGMII_SERDES);
+
+ __raw_writel(QCA955X_PLL_ETH_SGMII_SERDES_LOCK_DETECT |
+     QCA955X_PLL_ETH_SGMII_SERDES_PLL_REFCLK |
+     QCA955X_PLL_ETH_SGMII_SERDES_EN_PLL,
+     pllbase + QCA955X_PLL_ETH_SGMII_SERDES_REG);
+
+ ath79_device_reset_clear(QCA955X_RESET_SGMII_ANALOG);
+ ath79_device_reset_clear(QCA955X_RESET_SGMII);
+
+ while (!(__raw_readl(ethbase + QCA955X_GMAC_REG_SGMII_SERDES) &
+ QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS));
+
+ iounmap(ethbase);
+ iounmap(pllbase);
+}
+
 static int ath79_eth_instance __initdata;
 void __init ath79_register_eth(unsigned int id)
 {
--- a/arch/mips/ath79/dev-eth.h 2015-08-05 14:17:25.757504251 +0200
+++ b/arch/mips/ath79/dev-eth.h 2015-08-05 13:58:20.292866210 +0200
@@ -50,5 +50,6 @@ void ath79_setup_ar934x_eth_cfg(u32 mask
 void ath79_setup_ar934x_eth_rx_delay(unsigned int rxd, unsigned int rxdv);
 void ath79_setup_qca955x_eth_cfg(u32 mask);
 void ath79_setup_qca955x_eth_rx_delay(unsigned int rxd, unsigned int rxdv);
+void ath79_setup_qca955x_eth_serdes_cal(unsigned int sgmii_value);

 #endif /* _ATH79_DEV_ETH_H */
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150917/222c7dda/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list