[OpenWrt-Devel] OpenWrt /etc/hotplug.d/button/00-wps

[John kerry]

Hi,

I have to write some condition in
/etc/hotplug.d/button/50-wps/ file

I have to configure cat /etc/hotplug.d/button/00-wps file for following
condition:
if [ "$BUTTON" = "BTN_2" ] && [ "$ACTION" = "pressed" ]; then

I have to check eth0.1 if link is up then have ON status led otherwise OFF.

I am able ON/OFF Status LED based on eth0 link up/down using below

config led 'led_status'
        option name 'STATUS'
        option interval '50'
        option sysfs 'wndr3700:green:status'
        option default '0'
        option trigger 'netdev'
        option mode 'link'
        option dev 'eth0'

 But i need to check first above button that is pressed only i have to
check eth0 status.

I am not able to mix both condition in one place.

Could anyone please reply, how i can add such condition in that file.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150915/d5aeb5ce/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel