[OpenWrt-Devel] [PATCH] ramips: Add initial support for WiTi Board
Srdjan Rosic
srdjan.rosic at gmail.com
Thu Nov 19 07:17:42 EST 2015
hi all,
nitroshift's subscribed to the mailing list but the mailing list
doesn't like something in his git format-patch + git send-email
workflow, could be some distro specific setting. ... anyway, this is
his patch, I just happened to send the email,
Thanks,
-s
Srdjan Rosic
On Thu, Nov 19, 2015 at 12:10 PM, Srdjan Rosic <srdjan.rosic at gmail.com> wrote:
> From: Sebastian Careba <qshift at google.com>
>
> WITI.dts is based on PBR-M1.DTS
>
> Signed-off-by: Sebastian Careba <qshift at gmail.com>
> ---
> target/linux/ramips/base-files/etc/diag.sh | 1 +
> target/linux/ramips/base-files/lib/ramips.sh | 3 +
> .../ramips/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ramips/dts/WITI.dts | 143 +++++++++++++++++++++
> target/linux/ramips/image/Makefile | 7 +-
> target/linux/ramips/mt7621/profiles/witi.mk | 20 +++
> 6 files changed, 174 insertions(+), 1 deletion(-)
> create mode 100644 target/linux/ramips/dts/WITI.dts
> create mode 100644 target/linux/ramips/mt7621/profiles/witi.mk
>
> diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
> index 3013d24..4c442ac 100644
> --- a/target/linux/ramips/base-files/etc/diag.sh
> +++ b/target/linux/ramips/base-files/etc/diag.sh
> @@ -137,6 +137,7 @@ get_status_led() {
> ;;
> pbr-m1|\
> w306r-v20|\
> + witi|\
> zbt-wr8305rt)
> status_led="$board:green:sys"
> ;;
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
> index a1bcb72..ed11a9d 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -388,6 +388,9 @@ ramips_board_detect() {
> *"WHR-G300N")
> name="whr-g300n"
> ;;
> + *"WiTi")
> + name="WiTi"
> + ;;
> *"WIZARD 8800")
> name="wizard8800"
> ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index 0e8d619..d5ed836 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -112,6 +112,7 @@ platform_check_image() {
> whr-300hp2|\
> whr-600d|\
> whr-g300n|\
> + witi|\
> wizfi630a|\
> wl-330n|\
> wl-330n3g|\
> diff --git a/target/linux/ramips/dts/WITI.dts b/target/linux/ramips/dts/WITI.dts
> new file mode 100644
> index 0000000..d7658fa
> --- /dev/null
> +++ b/target/linux/ramips/dts/WITI.dts
> @@ -0,0 +1,143 @@
> +/dts-v1/;
> +
> +/include/ "mt7621.dtsi"
> +
> +/ {
> + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
> + model = "WiTi";
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x10000000>;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,57600";
> + };
> +
> + sdhci at 10130000 {
> + status = "okay";
> + };
> +
> + palmbus at 1E000000 {
> + spi at b00 {
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "w25q256";
> + reg = <0 0>;
> + linux,modalias = "m25p80";
> + spi-max-frequency = <10000000>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition at 30000 {
> + label = "u-boot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0xfb0000>;
> + };
> +
> + };
> + };
> +
> + i2c at 900 {
> + compatible = "ralink,i2c-mt7621";
> + reg = <0x900 0x100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c_pins>;
> + status = "okay";
> +
> + pcf8563: rtc at 51 {
> + status = "okay";
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
> + };
> + };
> +
> + pcie at 1e140000 {
> + status = "okay";
> +
> + pcie0 {
> + mt76 at 0,0 {
> + reg = <0x0000 0 0 0 0>;
> + device_type = "pci";
> + mediatek,mtd-eeprom = <&factory 0x0000>;
> + mediatek,2ghz = <0>;
> + };
> + };
> +
> + pcie1 {
> + mt76 at 1,0 {
> + reg = <0x0000 0 0 0 0>;
> + device_type = "pci";
> + mediatek,mtd-eeprom = <&factory 0x8000>;
> + mediatek,5ghz = <0>;
> + };
> + };
> + };
> +
> + ethernet at 1e100000 {
> + mtd-mac-address = <&factory 0xe000>;
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> +
> + power {
> + label = "witi:green:power";
> + gpios = <&gpio0 25 1>;
> + };
> +
> + sys {
> + label = "witi:green:sys";
> + gpios = <&gpio0 24 1>;
> + };
> +
> + internet {
> + label = "witi:green:internet";
> + gpios = <&gpio0 23 1>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> +
> + reset {
> + label = "reset";
> + gpios = <&gpio0 18 1>;
> + linux,code = <0x198>;
> + };
> + };
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
> + ralink,function = "gpio";
> + };
> + };
> + };
> +};
> diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
> index 5e19c3f..62b7c83 100644
> --- a/target/linux/ramips/image/Makefile
> +++ b/target/linux/ramips/image/Makefile
> @@ -952,7 +952,7 @@ endif
> #
>
> ifeq ($(SUBTARGET),mt7621)
> - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626
> + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 witi zbt-wg2626
> endif
>
> define Device/mt7621
> @@ -1002,6 +1002,11 @@ define Device/sap-g3200u3
> DTS := SAP-G3200U3
> endef
>
> +define Device/witi
> + DTS := WITI
> + IMAGE_SIZE := $(ralink_default_fw_size_16M)
> +endef
> +
> define Device/zbt-wg2626
> DTS := ZBT-WG2626
> IMAGE_SIZE := $(ralink_default_fw_size_16M)
> diff --git a/target/linux/ramips/mt7621/profiles/witi.mk b/target/linux/ramips/mt7621/profiles/witi.mk
> new file mode 100644
> index 0000000..dde84d6
> --- /dev/null
> +++ b/target/linux/ramips/mt7621/profiles/witi.mk
> @@ -0,0 +1,20 @@
> +#
> +# Copyright (C) 2015 OpenWrt.org
> +#
> +# This is free software, licensed under the GNU General Public License v2.
> +# See /LICENSE for more information.
> +#
> +
> +define Profile/WiTi
> + NAME:=WiTi
> + FEATURES+=rtc
> + PACKAGES:=\
> + kmod-usb-core kmod-usb3 kmod-usb-hid kmod-sdhci-mt7620 \
> + kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci \
> + kmod-rtc-pcf8563
> +endef
> +
> +define Profile/WiTi/Description
> + Default package set compatible with most boards.
> +endef
> +$(eval $(call Profile,WiTi))
> --
> 2.6.1
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list