[OpenWrt-Devel] [PATCH] CC: ramips: Backport support for ZBT WG2626

L. D. Pinney ldpinney at gmail.com
Fri Nov 6 20:09:40 EST 2015


Backport of r47351

Signed-off-by: L. D. Pinney <ldpinney at gmail.com>
---
 target/linux/ramips/base-files/etc/board.d/01_leds     |   5 +++
 target/linux/ramips/base-files/etc/board.d/02_network  |   3 +-
 target/linux/ramips/base-files/etc/diag.sh             |   3 ++
 target/linux/ramips/base-files/lib/ramips.sh           |   3 ++
 target/linux/ramips/base-files/lib/upgrade/platform.sh |   5 +--
 target/linux/ramips/dts/ZBT-WG2626.dts                 | 127 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 target/linux/ramips/image/Makefile                     |   7 +++-
 target/linux/ramips/mt7621/profiles/zbt.mk             |  19 +++++++++++
 8 files changed, 168 insertions(+), 4 deletions(-)

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 545bd70..5946f98 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -258,6 +258,11 @@ case $board in
 		set_usb_led "lenovo:blue:usb"
 		set_wifi_led "lenovo:blue:wifi"
 		;;
+	zbt-wg2626)
+		ucidef_set_led_default "power" "power" "zbt-wg2626:green:power" "1"
+		set_wifi_led "zbt-wg2626:green:air"
+		set_usb_led "zbt-wg2626:green:usb"
+		;;
 	zte-q7)
 		set_wifi_led "zte:blue:status"
 		;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 19ef3f7..d7d016b 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -145,7 +145,8 @@ ramips_setup_interfaces()
 	wsr-1166 | \
 	wt1520 | \
 	xiaomi-miwifi-mini |\
-	y1)
+	y1|\
+	zbt-wg2626)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "switch0" "1" "1"
 		ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index d32d692..0747d70 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -247,6 +247,9 @@ get_status_led() {
 	y1s)
 		status_led="lenovo:blue:power"
 		;;
+	zbt-wg2626)
+		status_led="zbt-wg2626:green:power"
+		;;
 	zte-q7)
 		status_led="zte:red:status"
 		;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 70f22a7..e4276d9 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -403,6 +403,9 @@ ramips_board_detect() {
 	*"Zbtlink ZBT-WA05")
 		name="zbt-wa05"
 		;;
+	*"ZBT-WG2626")
+		name="zbt-wg2626"
+		;;
 	*"ZBT WR8305RT")
 		name="wr8305rt"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 11fee85..2f64d8c 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -126,8 +126,9 @@ platform_check_image() {
 	xiaomi-miwifi-mini |\
 	y1 |\
 	y1s |\
-	zte-q7 |\
-	zbt-wa05)
+	zbt-wa05 |\
+	zbt-wg2626 |\
+	zte-q7)
 		[ "$magic" != "27051956" ] && {
 			echo "Invalid image type."
 			return 1
diff --git a/target/linux/ramips/dts/ZBT-WG2626.dts b/target/linux/ramips/dts/ZBT-WG2626.dts
new file mode 100644
index 0000000..6170454
--- /dev/null
+++ b/target/linux/ramips/dts/ZBT-WG2626.dts
@@ -0,0 +1,127 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+	model = "ZBT-WG2626";
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	sdhci at 10130000 {
+		status = "okay";
+	};
+
+	palmbus at 1E000000 {
+		spi at b00 {
+			status = "okay";
+
+			m25p80 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q128";
+				reg = <0 0>;
+				linux,modalias = "m25p80";
+				spi-max-frequency = <10000000>;
+
+				partition at 0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition at 30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition at 40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition at 50000 {
+					label = "firmware";
+					reg = <0x50000 0xfb0000>;
+				};
+
+			};
+		};
+
+		i2c at 900 {
+			compatible = "ralink,i2c-mt7621";
+			reg = <0x900 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c_pins>;
+			status = "okay";
+		};
+	};
+
+	pcie at 1e140000 {
+		status = "okay";
+
+		pcie0 {
+			mt76 at 0,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x8000>;
+				mediatek,2ghz = <0>;
+			};
+		};
+
+		pcie1 {
+			mt76 at 1,0 {
+				reg = <0x0000 0 0 0 0>;
+				device_type = "pci";
+				mediatek,mtd-eeprom = <&factory 0x0000>;
+				mediatek,5ghz = <0>;
+			};
+		};
+	};
+
+	ethernet at 1e100000 {
+		mtd-mac-address = <&factory 0xe000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 18 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "zbt-wg2626:green:status";
+			gpios = <&gpio0 24 1>;
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
+				ralink,function = "gpio";
+			};
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index b4d0897..0dd46ca 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -928,7 +928,7 @@ endif
 #
 
 ifeq ($(SUBTARGET),mt7621)
-  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500
+  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 zbt-wg2626
 endif
 
 define Device/mt7621
@@ -974,6 +974,11 @@ define Device/pbr-m1
   IMAGE_SIZE := $(ralink_default_fw_size_16M)
 endef
 
+define Device/zbt-wg2626
+  DTS := ZBT-WG2626
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+
 #
 # MT7628 Profiles
 #
diff --git a/target/linux/ramips/mt7621/profiles/zbt.mk b/target/linux/ramips/mt7621/profiles/zbt.mk
new file mode 100644
index 0000000..cf9beff
--- /dev/null
+++ b/target/linux/ramips/mt7621/profiles/zbt.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/ZBT-WG2626
+	NAME:=ZBT-WG2626 Device
+	PACKAGES:=\
+		kmod-usb-core kmod-usb3 kmod-sdhci-mt7620 \
+		kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci \
+		kmod-usb3-mt7621
+endef
+
+define Profile/ZBT-WG2626/Description
+	Package set for ZBT-WG2626 device
+endef
+$(eval $(call Profile,ZBT-WG2626))
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list