[OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus

[Kirill Berezin]

Hi,

Well, this was my bad )) I accidentally chose cpu's gpio and realised 
that this is a mistake yesterday night.

So I made a patch for atheros driver and it works. A signal level on 
different frequencies is more or less equal and seems adequate (about 
-30 dbm if a client within a meter from ap).

The patch for bb 14.07 is in the attachment. It should be placed in 
package/kernel/mac80211/patches . The code generates a lot of messages, 
so it'll be easy to track what happens.


Kirill

On 05/26/2015 11:25 PM, Stefan Rompf wrote:

> Until I found that I was accessing GPIO lines of the CPU (cat
> /sys/devices/virtual/gpio/gpiochip0/label => ath79), not of the 928x wifi
> chip. It seems that ath9k does not even export its pins to the GPIO subsystem.
>
> Stefan
>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: 930-ubnt-uap-plus-hsr.patch
Type: text/x-patch
Size: 10062 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150527/272a7c73/attachment.bin>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel