[OpenWrt-Devel] [PATCHv2] ralink: add support for ap699ge8c2
John Crispin
blogic at openwrt.org
Fri May 22 09:49:13 EDT 2015
Hi,
what board is this ? the name looks weird.
John
On 14/05/2015 15:17, Cristian Morales Vega wrote:
> Signed-off-by: Cristian Morales Vega <cristian at samknows.com>
> ---
> .../linux/ramips/base-files/etc/board.d/02_network | 5 +
> target/linux/ramips/base-files/lib/ramips.sh | 3 +
> .../ramips/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ramips/dts/AP699GE8C2.dts | 112 +++++++++++++++++++++
> target/linux/ramips/image/Makefile | 6 +-
> target/linux/ramips/mt7621/profiles/ap699ge8c2.mk | 18 ++++
> 6 files changed, 144 insertions(+), 1 deletion(-)
> create mode 100644 target/linux/ramips/dts/AP699GE8C2.dts
> create mode 100644 target/linux/ramips/mt7621/profiles/ap699ge8c2.mk
>
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
> index 24e1ba8..ee6aab0 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -116,6 +116,7 @@ ramips_setup_interfaces()
> ;;
>
> 3g-6200n | \
> + ap699ge8c2 | \
> ai-br100 | \
> dir-610-a1 | \
> dir-300-b7 | \
> @@ -268,6 +269,10 @@ ramips_setup_macs()
> local wan_mac=""
>
> case $board in
> + ap699ge8c2)
> + wan_mac=$(mtd_get_mac_binary factory 57350)
> + ;;
> +
> br-6475nd)
> lan_mac=$(cat /sys/class/net/eth0/address)
> wan_mac=$(mtd_get_mac_binary devdata 7)
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
> index 616f4a1..c1b7898 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -397,6 +397,9 @@ ramips_board_detect() {
> *"Mediatek MT7628AN evaluation board")
> name="mt7628"
> ;;
> + *"TWSZ AP699GE8C2")
> + name="ap699ge8c2"
> + ;;
> *)
> name="generic"
> ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index 17b456b..b79cca8 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -25,6 +25,7 @@ platform_check_image() {
> all0256n | \
> all5002 | \
> all5003 | \
> + ap699ge8c2 | \
> ar725w | \
> asl26555 | \
> awapn2403 | \
> diff --git a/target/linux/ramips/dts/AP699GE8C2.dts b/target/linux/ramips/dts/AP699GE8C2.dts
> new file mode 100644
> index 0000000..7157962
> --- /dev/null
> +++ b/target/linux/ramips/dts/AP699GE8C2.dts
> @@ -0,0 +1,112 @@
> +/dts-v1/;
> +
> +/include/ "mt7621.dtsi"
> +
> +/ {
> + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
> + model = "TWSZ AP699GE8C2";
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x4000000>;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,57600";
> + };
> +
> + palmbus at 1E000000 {
> + spi at b00 {
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "mx25l6405d";
> + reg = <0 0>;
> + linux,modalias = "m25p80";
> + spi-max-frequency = <10000000>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition at 30000 {
> + label = "u-boot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0x7b0000>;
> + };
> +
> + };
> + };
> + };
> +
> + pcie at 1e140000 {
> + status = "okay";
> +
> + pcie0 {
> + mt76 at 0,0 {
> + reg = <0x0000 0 0 0 0>;
> + device_type = "pci";
> + mediatek,mtd-eeprom = <&factory 0x8000>;
> + mediatek,2ghz = <0>;
> + };
> + };
> +
> + pcie1 {
> + mt76 at 1,0 {
> + reg = <0x0000 0 0 0 0>;
> + device_type = "pci";
> + mediatek,mtd-eeprom = <&factory 0x0000>;
> + mediatek,5ghz = <0>;
> + };
> + };
> + };
> +
> + ethernet at 1e100000 {
> + mtd-mac-address = <&factory 0xe000>;
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> +
> + wps {
> + label = "twsz:green:wps";
> + gpios = <&gpio1 14 1>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> + wps {
> + label = "wps";
> + gpios = <&gpio1 11 1>;
> + linux,code = <0x211>;
> + };
> + };
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
> + ralink,function = "gpio";
> + };
> + };
> + };
> +};
> diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
> index e6b5112..b024c21 100644
> --- a/target/linux/ramips/image/Makefile
> +++ b/target/linux/ramips/image/Makefile
> @@ -906,7 +906,7 @@ endif
> #
>
> ifeq ($(SUBTARGET),mt7621)
> - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt
> + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt ap699ge8c2
> endif
>
> define Device/mt7621
> @@ -943,6 +943,10 @@ define Device/firewrt
> IMAGE_SIZE := $(ralink_default_fw_size_16M)
> endef
>
> +define Device/ap699ge8c2
> + DTS := AP699GE8C2
> +endef
> +
> #
> # MT7628 Profiles
> #
> diff --git a/target/linux/ramips/mt7621/profiles/ap699ge8c2.mk b/target/linux/ramips/mt7621/profiles/ap699ge8c2.mk
> new file mode 100644
> index 0000000..30df15b
> --- /dev/null
> +++ b/target/linux/ramips/mt7621/profiles/ap699ge8c2.mk
> @@ -0,0 +1,18 @@
> +#
> +# Copyright (C) 2015 OpenWrt.org
> +#
> +# This is free software, licensed under the GNU General Public License v2.
> +# See /LICENSE for more information.
> +#
> +
> +define Profile/AP699GE8C2
> + NAME:=AP699GE8C2 Profile
> + PACKAGES:=\
> + kmod-usb-core kmod-usb3 \
> + kmod-ledtrig-usbdev kmod-mt76
> +endef
> +
> +define Profile/AP699GE8C2/Description
> + Package set optimized for the TWSZ AP699GE8C2
> +endef
> +$(eval $(call Profile,AP699GE8C2))
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list