[OpenWrt-Devel] 回复: How to Custom admin page on openwrt ?

Tymon banglang.huang at foxmail.com
Thu Mar 12 05:54:56 EDT 2015


That's great, I will have a try on my testbed in my home. And I agree with you that "admin.myrouter" is a proper domain name for my case. 
------------------
Regards,

banglang huang
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel 


 




------------------ 原始邮件 ------------------
发件人: "Claudio Thomas"<ct at xmodus-systems.de>; 
发送时间: 2015年3月12日(星期四) 下午5:14
收件人: "Tymon"<banglang.huang at foxmail.com>; 
抄送: "openwrt-devel"<openwrt-devel at lists.openwrt.org>; 
主题: Re: [OpenWrt-Devel] How to Custom  admin page on openwrt ?



On 12.03.2015 09:45, Tymon wrote:
            
       
        Thank you for your answer, Claudio Thomas:
       
       
                     I use the default utility called dnsmasq ( a         light-weigh dns server and dhcp server) on openwrt 12.09.
                     Of course the dhcp-server function is enabled         and PC-wireless client can get the ip address normally.
                     
                     Now I can see dns is 192.168.1.1 (just the         router) on my PC network configuration, thus I need to modify
                     the dnsmasq configuration so that it can map         the domain name (e.g. admin.myrouter.com<-->192.168.1.1)          I type on browser ?
       
       
          Hi Tymon,
     again: The service that can map from a domain (like     admin.myrouter.com) to an IP-address (like 192.168.1.1) is a     DNS-Server (like bind9). In your case there is probably no     DNS-server in the world that knows "admin.myrouter.com". Thats why     you don't get the IP to that domain.
     Because no server in the world knows this domain YOU must find a     solution so that 1 server in the world knows this domain: your own     DNS-server with a zone file for "myrouter.com".
     
     The dnsmasq does only forward and cache the queries, but does not     has the option (so far I know) to manage your own domain. You need     to set up a dnsserver and create a zone file where the mapping for     "all" hostnames for the domain "myrouter.com" are defined.
     
     Sorry, but it is not possible to explain how to set up a DNS-server     by mail. But there are many DNS-server howtos on the net (like in     the openwrt       wiki). In small chunks: remove dnsmasq + install     binddns-server, enable forwarding, add a master-zone entry in the     named.conf, define your zone file and start your dns-server (bind).
     
     PS: be carefull when using domain-names that (could) really exist in     the internet. In your case only use *.com domains if this domain     belongs to you. "admin.myrouter.com" coudl be a bad idea,     "admin.myrouter" would probably be better.
     
     Best regards,
     Claudio
     
     -- 
     Working on OpenWrt CC for Xmodus GSM Router       XM1710E
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150312/c0358e71/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list