[OpenWrt-Devel] [PATCH 4/4] ar71xx: improve WD's My Net Wi-fi Range Extender image creation

[Christian Lamparter]

Previously, the generated images for the My Net Wi-fi Range Extender
wouldn't always work (and panic) due to the fixed mtd offsets and
sizes for the kernel and rootfs. This patch fixes the problem by
utilizing the shared Cybertan's partition parser to recalculate
the mtd partitions for every image dynamically everytime.

Reported-by: Pascal Paradis <peparadis at yahoo.com>
Signed-off-by: Christian Lamparter <chunkeey at googlemail.com>
---
 target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c | 12 +++++++++++-
 target/linux/ar71xx/image/Makefile                          |  4 ++--
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c
index a3deed5..02d168e 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c
@@ -55,6 +55,16 @@
 
 #define MYNET_REXT_ART_ADDR		0x1f7f0000
 
+static const char *mynet_rext_part_probes[] = {
+	"cybertan",
+	NULL,
+};
+
+static struct flash_platform_data mynet_rext_flash_data = {
+	.type		= "s25fl064k",
+	.part_probes	= mynet_rext_part_probes,
+};
+
 static struct gpio_led mynet_rext_leds_gpio[] __initdata = {
 	{
 		.name		= "wd:blue:power",
@@ -130,7 +140,7 @@ static void __init mynet_rext_setup(void)
 	u8 *art = (u8 *) KSEG1ADDR(MYNET_REXT_ART_ADDR);
 	u8 tmpmac[ETH_ALEN];
 
-	ath79_register_m25p80(NULL);
+	ath79_register_m25p80(&mynet_rext_flash_data);
 
 	/* GPIO configuration from drivers/char/GPIO8.c */
 
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index b4b75a1..204a6e7 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -407,7 +407,7 @@ r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata),256k(caldata-ba
 wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k at 0x6c0000(firmware),256k(caldata_backup),-(reserved)
 zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k at 0x50000(firmware)
 mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
-mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro,6848k at 0x130000(filesystem)
+mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
 zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
 qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
 
@@ -1301,7 +1301,7 @@ $(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,tt
 
 $(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01))
 
-$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:4,1.00.01))
+$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01))
 
 $(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
 $(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01))
-- 
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel