[OpenWrt-Devel] [PATCH] ar71xx: fix 100/10mbps ethernet link issues on mynet range extender
chunkeey at googlemail.com
Fri Jun 12 06:12:38 EDT 2015
On Tuesday, June 09, 2015 09:24:41 PM Christian Lamparter wrote:
> On Tuesday, June 09, 2015 09:05:46 AM Florian Fainelli wrote:
> > On Jun 9, 2015 7:36 AM, "Christian Lamparter" <chunkeey at googlemail.com> wrote:
> > > On Wednesday, June 03, 2015 05:20:22 PM Christian Lamparter wrote:
> > Actually, I have one question, most PHY s should disable these kinds of
> > delays when linking at 10/100Mbits/sec. Is not that working here because
> > the registers used have a special behavior (force or override), or is it
> > broken at the hardware level?
> => The problem with the mynet device is that the tx delay needs to be
> enabled for 100mbps/10mbps speed and disabled for 1000mbps. Not doing
> so results in an unusable ethernet link (verified by Pascal and me).
> This is why I think this is a hardware problem. (Furthermore, Sven
> Eckelmann (CC'd, he wrote the support for the OM5P-AN - which also uses
> the AT8035) doesn't mention any workaround in his commits.
No further comments so far (but also: no merge). Ping?
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel