[OpenWrt-Devel] Chaos Calmer 15.05-rc3

[Fernando Frediani]

Cool.

Does this "Fixed broken IPv6 downstream DHCPv6-PD and onlink-route 
handling" fix the issue with loosing the default gateway for IPv6 and 
only fixing when you reboot the router ?

Fernando

On 16/07/2015 11:39, Steven Barth wrote:
> The OpenWrt developers are proud to announce the third release candidate of OpenWrt Chaos Calmer.
>
>     _______                     ________        __
>   |       |.-----.-----.-----.|  |  |  |.----.|  |_
>   |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
>   |_______||   __|_____|__|__||________||__|  |____|
>            |__| W I R E L E S S   F R E E D O M
>   -----------------------------------------------------
>   CHAOS CALMER (15.05 RC3)
>   -----------------------------------------------------
>    * 1 1/2 oz Gin            Shake with a glassful
>    * 1/4 oz Triple Sec       of broken ice and pour
>    * 3/4 oz Lime Juice       unstrained into a goblet.
>    * 1 1/2 oz Orange Juice
>    * 1 tsp. Grenadine Syrup
>   -----------------------------------------------------
>
>   -----------------------------------------------------
> http://downloads.openwrt.org/chaos_calmer/15.05-rc3/
>
> ** Improvements since RC 2 **
> * brcmfmac: support for BCM43602
> * mt76: updated version with new firmware support, TX & DMA fixes
> * Updated 3.18 to 3.18.18
> * Fixed image builder generation
> * Various security updates (e.g. openssl, curl)
> * Minor fixes
>
> ** Improvements since RC 1 **
> * Fixed broken ImageBuilders for most targets
> * Updated 3.18 to 3.18.14
> * Fixed broken IPv6 downstream DHCPv6-PD and onlink-route handling
> * Images (special format) for Asus brcm47xx and bcm53xx devices
> * Improved stability of sysupgrade on brcm47xx and bcm53xx
> * Added HTTPS enforcement option to uhttpd
> * Fixed umask issue
> * Added support for a few new boards
>
>
> ** Highlights since Barrier Breaker **
>
> * Linux kernel updated to version 3.18
> * Improved Security Features
>      - Rewritten package signing architecture based on ed25519
>      - Added support for jails
>      - Added support for hardened builds
> * Improved Networking Support
>      - Added or improved support for lots of 3G/4G modems (MBIM, QMI, NCM, ...)
>      - Added support for 464XLAT (CLAT) [RFC 6877 + RFC 7050]
>      - Netfilter performance enhancements (conntrack route cache)
>      - Improved support for self-managing networks [draft-ietf-homenet-hncp]
>      - Better multi-core support for the network stack
>      - Improved support for MAP-E, MAP-T and LW4over6 IPv4 transitioning technologies
>          [draft-ietf-softwire-map, -map-t, -map-dhcp, -lw4over6]
>      - Improved network auto-setup capable of detecting and bootstrapping IPv4-only,
>        6rd, Dual-Stack, IPv6-only, DS-Lite, LW4over6, MAP-E, MAP-T, 464XLAT
>        and combinations without explicit configuration [based on RFC 7084]
>      - Added support for Smart Queue Management (SQM) QoS, AQM and Traffic Shaping
>      - Improved support for DNSSEC
> * Platform and Driver Support
>      - Added support for feeds of externally maintained targets
>      - New mt7621 subtarget for Mediatek 11ac SoC
>      - New mt76 mac80211 based wifi driver for MTK 11ac cores.
>      - New mwlwifi mac80211 based wifi driver for the Marvell 88W8864
>      - New bcm53xx target for Broadcom ARM BCM47xx/53xx devices
>      - New mxs target for Freescale i.MX23/28 family and various boards
>      - New sunxi target for AllWinner A10/A13/A20 family and various boards
>      - brcm2708: support for Raspberry Pi 2
>      - brcm63xx: support for BCM6318 and BCM63268 family
>      - brcm63xx: improved fallback sprom support with bcma support
>      - New ipq806x target for QCA IPQ806x SoC family
>
> * Known Issues
>      - KALLSYMS is active causing some devices to fail
>
> And lots and lots of other advancements...
> As always a big thank you goes to all our active package maintainers, testers, supporters and documenters.
>
>
> Have fun!
>      The OpenWrt developer team
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel