[OpenWrt-Devel] [PATCH v4 1/5] ar71xx: add support for the devolo dLAN pro 500 Wireless+

Günther Kelleter guenther.kelleter at devolo.de
Thu Jul 9 12:07:10 EDT 2015


Signed-off-by: Günther Kelleter <guenther.kelleter at devolo.de>
---
 target/linux/ar71xx/base-files/etc/diag.sh         |   3 +
 .../ar71xx/base-files/etc/uci-defaults/01_leds     |   7 +
 .../ar71xx/base-files/etc/uci-defaults/02_network  |   4 +
 target/linux/ar71xx/base-files/lib/ar71xx.sh       |   3 +
 .../ar71xx/base-files/lib/upgrade/platform.sh      |   1 +
 target/linux/ar71xx/config-3.18                    |   1 +
 .../files/arch/mips/ath79/mach-dlan-pro-500-wp.c   | 203 +++++++++++++++++++++
 .../linux/ar71xx/generic/profiles/devolo-dlan.mk   |  19 ++
 target/linux/ar71xx/image/Makefile                 |  19 ++
 .../610-MIPS-ath79-openwrt-machines.patch          |  25 ++-
 10 files changed, 279 insertions(+), 6 deletions(-)
 create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c
 create mode 100644 target/linux/ar71xx/generic/profiles/devolo-dlan.mk

diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index ce2b9ba..cb5d963 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -75,6 +75,9 @@ get_status_led() {
 	dir-835-a1)
 		status_led="d-link:amber:power"
 		;;
+	dlan-pro-500-wp)
+		status_led="devolo:green:wlan-2g"
+		;;
 	dragino2)
 		status_led="dragino2:red:system"
 		;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index a361b77..cf5c735 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -173,6 +173,13 @@ dir-825-c1)
 	ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:blue:wlan2g" "phy0tpt"
 	;;
 
+dlan-pro-500-wp)
+	ucidef_set_led_default "power" "System Power" "devolo:green:status" "1"
+	ucidef_set_led_netdev "lan" "Ethernet Activity" "devolo:green:eth" "br-lan"
+	ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "devolo:green:wlan-2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "devolo:blue:wlan-5g" "none"
+	;;
+
 gl-inet)
 	ucidef_set_led_netdev "lan" "LAN" "gl-connect:green:lan" "eth1"
 	ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index ec709a0..615dbc4 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -301,6 +301,10 @@ esr900)
 	[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
 	;;
 
+dlan-pro-500-wp)
+	ucidef_set_interface_lan "eth0 eth1"
+	;;
+
 all0305 |\
 aw-nr580 |\
 bullet-m |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index dd13948..f323ec3 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -423,6 +423,9 @@ ar71xx_board_detect() {
 	*"DIR-835 rev. A1")
 		name="dir-835-a1"
 		;;
+	*"dLAN pro 500 Wireless+")
+		name="dlan-pro-500-wp"
+		;;
 	*"Dragino v2")
 		name="dragino2"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 73d8b0d..8b27b6d 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -208,6 +208,7 @@ platform_check_image() {
 	dir-615-i1 | \
 	dir-825-c1 | \
 	dir-835-a1 | \
+	dlan-pro-500-wp | \
 	dragino2 | \
 	epg5000 | \
 	esr1750 | \
diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18
index 02857d5..353c10a 100644
--- a/target/linux/ar71xx/config-3.18
+++ b/target/linux/ar71xx/config-3.18
@@ -56,6 +56,7 @@ CONFIG_ATH79_MACH_DIR_615_C1=y
 CONFIG_ATH79_MACH_DIR_615_I1=y
 CONFIG_ATH79_MACH_DIR_825_B1=y
 CONFIG_ATH79_MACH_DIR_825_C1=y
+CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y
 CONFIG_ATH79_MACH_DRAGINO2=y
 CONFIG_ATH79_MACH_EAP300V2=y
 CONFIG_ATH79_MACH_EAP7660D=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c
new file mode 100644
index 0000000..ae6f443
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c
@@ -0,0 +1,203 @@
+/*
+ * devolo dLAN pro 500 Wireless+ support
+ *
+ * Copyright (c) 2013-2015 devolo AG
+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg at openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DLAN_PRO_500_WP_GPIO_DLAN_POWER_ENABLE		13
+#define DLAN_PRO_500_WP_GPIO_DLAN_LED_ENABLE		17
+#define DLAN_PRO_500_WP_GPIO_LED_WLAN_5G		11
+#define DLAN_PRO_500_WP_GPIO_LED_WLAN_2G		12
+#define DLAN_PRO_500_WP_GPIO_LED_STATUS			16
+#define DLAN_PRO_500_WP_GPIO_LED_ETH			14
+
+#define DLAN_PRO_500_WP_GPIO_BTN_WPS			20
+#define DLAN_PRO_500_WP_GPIO_BTN_WLAN			22
+#define DLAN_PRO_500_WP_GPIO_BTN_DLAN			21
+#define DLAN_PRO_500_WP_GPIO_BTN_RESET			4
+
+#define DLAN_PRO_500_WP_KEYS_POLL_INTERVAL		20	/* msecs */
+#define DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL		(3 * DLAN_PRO_500_WP_KEYS_POLL_INTERVAL)
+
+#define DLAN_PRO_500_WP_ART_ADDRESS			0x1fff0000
+#define DLAN_PRO_500_WP_CALDATA_OFFSET			0x1000
+#define DLAN_PRO_500_WP_MAC_ADDRESS_OFFSET		0x1002
+#define DLAN_PRO_500_WP_PCIE_CALDATA_OFFSET		0x5000
+
+static struct gpio_led dlan_pro_500_wp_leds_gpio[] __initdata = {
+	{
+		.name		= "devolo:green:status",
+		.gpio		= DLAN_PRO_500_WP_GPIO_LED_STATUS,
+		.active_low	= 1,
+	},
+	{
+		.name		= "devolo:green:eth",
+		.gpio		= DLAN_PRO_500_WP_GPIO_LED_ETH,
+		.active_low	= 1,
+	},
+	{
+		.name		= "devolo:blue:wlan-5g",
+		.gpio		= DLAN_PRO_500_WP_GPIO_LED_WLAN_5G,
+		.active_low	= 1,
+	},
+	{
+		.name		= "devolo:green:wlan-2g",
+		.gpio		= DLAN_PRO_500_WP_GPIO_LED_WLAN_2G,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button dlan_pro_500_wp_gpio_keys[] __initdata = {
+	{
+		.desc		= "dLAN button",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DLAN_PRO_500_WP_GPIO_BTN_DLAN,
+		.active_low	= 0,
+	},
+	{
+		.desc		= "WPS button",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DLAN_PRO_500_WP_GPIO_BTN_WPS,
+		.active_low	= 0,
+	},
+	{
+		.desc		= "WLAN button",
+		.type		= EV_KEY,
+		.code		= BTN_2,
+		.debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DLAN_PRO_500_WP_GPIO_BTN_WLAN,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "Reset button",
+		.type		= EV_KEY,
+		.code           = KEY_RESTART,
+		.debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DLAN_PRO_500_WP_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}
+};
+
+static struct ar8327_pad_cfg dlan_pro_500_wp_ar8327_pad0_cfg = {
+	.mode = AR8327_PAD_PHY_RGMII,
+	.txclk_delay_en = false,
+	.rxclk_delay_en = false,
+	.txclk_delay_sel = AR8327_CLK_DELAY_SEL0,
+	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
+};
+
+static struct ar8327_led_cfg dlan_pro_500_wp_ar8327_led_cfg = {
+	.led_ctrl0 = 0x00000000,
+	.led_ctrl1 = 0xc737c737,
+	.led_ctrl2 = 0x00000000,
+	.led_ctrl3 = 0x00c30c00,
+	.open_drain = true,
+};
+
+static struct ar8327_platform_data dlan_pro_500_wp_ar8327_data = {
+	.pad0_cfg = &dlan_pro_500_wp_ar8327_pad0_cfg,
+	.port0_cfg = {
+		.force_link = 1,
+		.speed = AR8327_PORT_SPEED_1000,
+		.duplex = 1,
+		.txpause = 0,
+		.rxpause = 0,
+	},
+	.led_cfg = &dlan_pro_500_wp_ar8327_led_cfg,
+};
+
+static struct mdio_board_info dlan_pro_500_wp_mdio0_info[] = {
+	{
+		.bus_id = "ag71xx-mdio.0",
+		.phy_addr = 0,
+		.platform_data = &dlan_pro_500_wp_ar8327_data,
+	},
+};
+
+static void __init dlan_pro_500_wp_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(DLAN_PRO_500_WP_ART_ADDRESS);
+	u8 *cal = art + DLAN_PRO_500_WP_CALDATA_OFFSET;
+	u8 *wifi_mac = art + DLAN_PRO_500_WP_MAC_ADDRESS_OFFSET;
+
+	ath79_register_m25p80(NULL);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_pro_500_wp_leds_gpio),
+				 dlan_pro_500_wp_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, DLAN_PRO_500_WP_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(dlan_pro_500_wp_gpio_keys),
+					dlan_pro_500_wp_gpio_keys);
+
+	gpio_request_one(DLAN_PRO_500_WP_GPIO_DLAN_POWER_ENABLE,
+			 GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+			 "PLC power");
+	gpio_request_one(DLAN_PRO_500_WP_GPIO_DLAN_LED_ENABLE,
+			 GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+			 "PLC LEDs");
+
+	ath79_register_wmac(cal, wifi_mac);
+
+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+
+	ath79_register_mdio(1, 0x0);
+	ath79_register_mdio(0, 0x0);
+
+	mdiobus_register_board_info(dlan_pro_500_wp_mdio0_info,
+				    ARRAY_SIZE(dlan_pro_500_wp_mdio0_info));
+
+	/* GMAC0 is connected to a AR7400 PLC in PHY mode */
+	ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 2);
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth0_pll_data.pll_1000 = 0x0e000000;
+	ath79_eth0_data.speed = SPEED_1000;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_register_eth(0);
+
+	/* GMAC1 is connected to the internal switch */
+	ath79_init_mac(ath79_eth1_data.mac_addr, wifi_mac, 1);
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+	ath79_eth1_data.speed = SPEED_1000;
+	ath79_eth1_data.duplex = DUPLEX_FULL;
+	ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_DLAN_PRO_500_WP, "dLAN-pro-500-wp", "devolo dLAN pro 500 Wireless+",
+	     dlan_pro_500_wp_setup);
diff --git a/target/linux/ar71xx/generic/profiles/devolo-dlan.mk b/target/linux/ar71xx/generic/profiles/devolo-dlan.mk
new file mode 100644
index 0000000..281c04c
--- /dev/null
+++ b/target/linux/ar71xx/generic/profiles/devolo-dlan.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/dLAN_pro_500_wp
+	NAME:=devolo dLAN pro 500 Wireless+
+	PACKAGES:=open-plc-utils open-plc-utils-chkpib open-plc-utils-getpib open-plc-utils-modpib \
+		open-plc-utils-setpib open-plc-utils-hpavkey open-plc-utils-amphost \
+		open-plc-utils-plctool open-plc-utils-pibdump open-plc-utils-plcstat \
+		ebtables hostapd-utils wifitoggle wpad
+endef
+
+define Profile/dLAN_pro_500_wp/Description
+	Package set optimized for the devolo dLAN pro 500 Wireless+.
+endef
+$(eval $(call Profile,dLAN_pro_500_wp))
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 0351310..81e100f 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -1185,6 +1185,7 @@ cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-
 eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
 db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k at 0x50000(firmware)
 dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
+dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,1152k at 0x70000(kernel),6528k(rootfs),7680k at 0x70000(firmware),64k(art)ro
 cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k at 0x7f0000(caldata_copy)
 cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k at 0x660000(caldata_orig),6208k at 0x50000(firmware_orig)
 esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k at 0x40000(firmware)
@@ -1402,6 +1403,22 @@ Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap12
 Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000)
 Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
 
+define Image/Build/dLAN
+	$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
+	$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
+	$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
+	$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
+	if [ -e "$(call factoryname,$(1),$(2))" ]; then \
+		dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
+			of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
+		dd if=$(KDIR)/root.$(1) \
+			of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
+	fi
+endef
+
+Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
+Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
+Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
 
 define Image/Build/Ath
 	$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
@@ -2063,6 +2080,8 @@ $(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS
 $(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01))
 $(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
 
+$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) root=31:5 mem=128M,KRuImage))
+
 $(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e))
 $(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
 $(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71))
diff --git a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
index 3f22a37..01d7224 100644
--- a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,193 @@
+@@ -16,22 +16,194 @@
  
  enum ath79_mach_type {
  	ATH79_MACH_GENERIC = 0,
@@ -39,6 +39,7 @@
 +	ATH79_MACH_DIR_825_B1,		/* D-Link DIR-825 rev. B1 */
 +	ATH79_MACH_DIR_825_C1,		/* D-Link DIR-825 rev. C1 */
 +	ATH79_MACH_DIR_835_A1,		/* D-Link DIR-835 rev. A1 */
++	ATH79_MACH_DLAN_PRO_500_WP,	/* devolo dLAN pro 500 Wireless+ */
 +	ATH79_MACH_DRAGINO2,		/* Dragino Version 2 */
 +	ATH79_MACH_ESR900,		/* EnGenius ESR900 */
 +	ATH79_MACH_EW_DORIN,		/* embedded wireless Dorin Platform */
@@ -267,7 +268,7 @@
  config ATH79_MACH_AP121
  	bool "Atheros AP121 reference board"
  	select SOC_AR933X
-@@ -11,62 +75,1007 @@ config ATH79_MACH_AP121
+@@ -11,62 +75,1018 @@ config ATH79_MACH_AP121
  	select ATH79_DEV_M25P80
  	select ATH79_DEV_USB
  	select ATH79_DEV_WMAC
@@ -615,6 +616,17 @@
 +	select ATH79_DEV_USB
 +	select ATH79_DEV_WMAC
 +
++config ATH79_MACH_DLAN_PRO_500_WP
++	bool "devolo dLAN pro 500 Wireless+ support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_USB
++
 +config ATH79_MACH_DRAGINO2
 +	bool "DRAGINO V2 support"
 +	select SOC_AR933X
@@ -1303,7 +1315,7 @@
  
  config ATH79_MACH_UBNT_XM
  	bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +1092,97 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +1103,97 @@ config ATH79_MACH_UBNT_XM
  	  Say 'Y' here if you want your kernel to support the
  	  Ubiquiti Networks XM (rev 1.0) board.
  
@@ -1401,7 +1413,7 @@
  endmenu
  
  config SOC_AR71XX
-@@ -124,7 +1224,10 @@ config ATH79_DEV_DSA
+@@ -124,7 +1235,10 @@ config ATH79_DEV_DSA
  config ATH79_DEV_ETH
  	def_bool n
  
@@ -1413,7 +1425,7 @@
  	def_bool n
  
  config ATH79_DEV_GPIO_BUTTONS
-@@ -154,6 +1257,11 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -154,6 +1268,11 @@ config ATH79_PCI_ATH9K_FIXUP
  	def_bool n
  
  config ATH79_ROUTERBOOT
@@ -1427,7 +1439,7 @@
  endif
 --- a/arch/mips/ath79/Makefile
 +++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,122 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)		+= route
+@@ -38,9 +38,123 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)		+= route
  #
  # Machines
  #
@@ -1448,6 +1460,7 @@
 +obj-$(CONFIG_ATH79_MACH_CAP4200AG)	+= mach-cap4200ag.o
 +obj-$(CONFIG_ATH79_MACH_CPE510)		+= mach-cpe510.o
  obj-$(CONFIG_ATH79_MACH_DB120)		+= mach-db120.o
++obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP)	+= mach-dlan-pro-500-wp.o
 +obj-$(CONFIG_ATH79_MACH_DGL_5500_A1)	+= mach-dgl-5500-a1.o
 +obj-$(CONFIG_ATH79_MACH_DHP_1565_A1)	+= mach-dhp-1565-a1.o
 +obj-$(CONFIG_ATH79_MACH_DIR_505_A1)	+= mach-dir-505-a1.o
-- 
2.4.4.88.gac2ab0d
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list